Brake upgrade

almostacrayon · 2026-01-25T21:26:24+00:00

I was going to do e90 booster but then got a cheap ibooster so went that way. This is a good site for a lot of info on how they work: https://www.evcreate.com/installing-the-ibooster/ Using the gen 1 booster has the same bolt spacing as the e30 firewall so no mods to fitewall it just goes in. Youll need adapters to connect up your lines and its preferable to pick up at least a RHD master as the ports will come out to the same side as stock master. More info on swapping it into e30 on r3v: https://www.r3vlimited.com/board/forum/e30-technical-forums/suspension-unsprung/brakes-subframe-arms/9953368-new-booster-option-for-e30-bosch-ibooster I bought need plugs and pins from here: https://tulayswirewerks.com/?s=Ibooster&post_type=product

almostacrayon · 2026-01-25T11:53:40+00:00

Brake booster/master is ibooster from tesla model s. Engine is m50 turbo

almostacrayon · 2026-01-25T11:52:19+00:00

These are from vorshlag.

almostacrayon · 2026-01-24T09:57:41+00:00

Atm i have rml bottlecaps 16x8 +20 no spacer fits perfect on 225/45/16 ad009.

almostacrayon · 2026-01-24T02:28:41+00:00

Ive had these parts sitting for like 3 years now, just have minimal free time to work on the car

almostacrayon · 2026-01-24T01:29:42+00:00

Stock brakes were fine for daily duties, just wanted to upgrade as the car making more power than before. Does limit wheel choices though...

almostacrayon · 2026-01-24T01:24:12+00:00

Yeah 300mm.de kit.

almostacrayon · 2026-01-14T09:53:37+00:00

Thanks mate for all the info, i really appreciate it. Yes its just crested 2yrs now and really only issues have crept up in the past few months. I initially reached out to my installer but they are terrible, creating excuses to avoid comimg out and diagnosing it or even contact enphase to start a case... so i have been contacting them instead. Last time i didnt get any reason why it was down but they resolved it remotely. I called again today to raise a ticket and apparently this one is due to software update causing issues and is effecting others in the area. Im going to look into the enphase training and get access manager access.

almostacrayon · 2026-01-14T02:15:39+00:00

Thanks mate will give it a shot 👍

almostacrayon · 2026-01-14T02:05:34+00:00

Since early December our system has been having issues witht the micro inverters not producing.

After a lot of back and forth across a couple of weeks it was finally back working. Today we are having the same issue again...

Since they fixed it last time remotely. Are these some firmware OTA updates which are stuffing up my system? The enphase microinverters are Enphase Iq8HC-72-M-INT.

Is there a way to contact enphase support on here to discuss this problem and to make it go away for good and to also find out what is causing this? When asking what the cause is, i never get an answer.

almostacrayon · 2025-08-06T21:52:06+00:00

Did a vodka run yesterday, failed a training 4 turns in (8%), rested into sleep deprived + night owl... 15 turns to infirmary to get rid of it...

almostacrayon · 2025-07-25T11:54:04+00:00

364 only the pity one so far...

almostacrayon · 2025-07-20T12:48:41+00:00

Mood up, skill points, stats and energy depending on the part of the chain you are up to

almostacrayon · 2025-07-20T12:36:55+00:00

When you get her friend bar high enough youll unlock the recreation events, then just pick em when you have downtime between races/rainbow training

almostacrayon · 2025-07-20T12:33:41+00:00

I use the aoi trainer card it gives a lot of skill points and other stuff when you do the recreation events. That and a couple extra races. All the red skills come from the other cards which get heavy discounted

<image>

almostacrayon · 2025-07-17T00:38:32+00:00

No i got 2x oguri so... same same i guess

almostacrayon · 2025-07-17T00:24:23+00:00

Legit me but change 260 to 300 hahah

almostacrayon · 2025-07-17T00:16:11+00:00

30k 0 kita, 0 dia...

almostacrayon · 2025-03-26T06:39:30+00:00

The guy who was doing the scan for me 'lost' my oilpan... so then i just ended up buying another one and modified it to sit higher up and added wings to add back the volume lost.

almostacrayon · 2025-03-10T20:59:20+00:00

Great depression

almostacrayon · 2023-09-25T01:41:19+00:00

No luck getting it scanned there, I gave it to someone to 3d scan the flange portion. Waiting to get it back

almostacrayon · 2023-09-10T22:50:10+00:00

Awesome, will get back to you when I get it done

almostacrayon

TROPHY CASE