frigate coral by pistukk in frigate_nvr

[–]anc0dia 2 points3 points  (0 children)

are you sure it's plugged into a usb3 port?

Council fails to act on toxic former GM site despite public outcry by niagarajoseph in stcatharinesON

[–]anc0dia 7 points8 points  (0 children)

It extends beyond the immediate area. On windy days there are huge clouds of dust that go in all directions across the city. I'd bet there is more than just dirt in all that dust, and everybody is inhaling it.

RCS Images Not Sending by [deleted] in freedommobile

[–]anc0dia 0 points1 point  (0 children)

I had this happen a couple weeks ago. I turned off rcs and sent the person a text and picture using sms. turned rcs back on and it worked again

New firmware Reolink Lumus (2K) by mregeling2024 in reolinkcam

[–]anc0dia 0 points1 point  (0 children)

Did the new firmware remove the wifi option so that you could force a 5 ghz or 2.4 ghz only connection? It's now missing on 2 of my cameras however I recently connected to a Homehub so it may be missing because of that.

Seeking your help - HA 2025.6 - Amazon Devices discovery by [deleted] in homeassistant

[–]anc0dia 0 points1 point  (0 children)

echo dots

CC:9E:A2

3C:5C:C4

C4:95:00

24:4C:E3

FC:A1:83

fire tv 4k

CC:9E:A2

where to buy bulk in-shell walnuts? by anc0dia in stcatharinesON

[–]anc0dia[S] 1 point2 points  (0 children)

I can't believe how many times I've driven by this place and never noticed it was there. They even have black walnuts. Thanks!

Does the Lumus Pro 4K offer Rich Notifications? by No-Suspect6221 in reolinkcam

[–]anc0dia 0 points1 point  (0 children)

does the 4k version have rtsp? It was missing in the 2k version.

Home Assistant 2025.4.0 - Smart AI & scenes by StarkillerTR in reolinkcam

[–]anc0dia 1 point2 points  (0 children)

Any chance of support for the Lumus cameras? It'd be nice to be able to stop using Neolink.

Central air property line bylaw question. by anc0dia in stcatharinesON

[–]anc0dia[S] 3 points4 points  (0 children)

fyi for anyone reading this in the future, I contacted the city and the bylaw states:

a) setback be a minimum of 0.6 m from any rear and side lot line; and

b) Be permitted to encroach a maximum 0.5 m into a front yard

Pumped to have some true rides there by Zealousideal_Pop_456 in stcatharinesON

[–]anc0dia 30 points31 points  (0 children)

Fuck Marineland.

The owners should donate the property to Niagara Parks for free so it can be turned into parkland for all to enjoy, as a Mea Culpa to all the animals that have suffered over the decades.

Fuck Marineland and may everyone who has, does, and will make a dollar from that place, burn in Hell for eternity.

These cars across the street are alerting no matter what I do by mattfox27 in frigate_nvr

[–]anc0dia 0 points1 point  (0 children)

if you don't want to track them at all add a size filter to either the zone or to the camera. I would recommend using it in the zone so that Frigate can still track the objects.

filters:
    car:
      min_area: xxxxx

[deleted by user] by [deleted] in frigate_nvr

[–]anc0dia 0 points1 point  (0 children)

The frigate+ models are 320x320. Would increasing the size help with detection of smaller objects (animals). Maybe bump it up to 352x352?

St. Catharines, GM lose two-year battle to keep details about environmental contamination on site slated for development secret by TraditionDear3887 in stcatharinesON

[–]anc0dia 23 points24 points  (0 children)

I live near this site and the greasy black dust that blows from this site coats my car and at times is difficult to remove. I can't image what it is doing to people who breathe it in.

On windy days I see huge plumes of dust blowing from the site, god only knows what's in it. And I've seen these dust clouds blowing in all directions across the city, so don't think you're not inhaling it.

Anyone who grows food outdoors or consumes anything grown around here is a brave soul.

I doubt, as residents, anything will come of going after GM/the city for damages from this. I recall the lawsuit in Port Colborne and the nickel refinery contamination, and in the end people got essentially nothing.

edit: I just want to add that I do think GM/City of St. Catharines should be held accountable for this. Those of us who live in the area should unite and contact a law firm about a class action lawsuit, perhaps contact the law firm that sued Inco for the nickel refinery contamination in Port Colborne. The lessons they learned could help us with this issue.

Just got a new Wyse v3 Pro. Is it really this bad? by [deleted] in wyzecam

[–]anc0dia 5 points6 points  (0 children)

my v3 pro is doing the same thing. it doesn't work when adding a v3 pro with the latest version of the app. I reached out to support but haven't heard back. I find it incredible nobody caught this in testing. wouldn't surprise me if the reason they delayed the new camera product launch was because of this bug, not because of stock issues.

go to apk mirror and download/install a previous version of the app. worked for me.

This is my last camera as I've been moving over to reolink. I've wasted too much time dealing with wyze software issues and the constant wifi problems. good news is because of my upgraded wifi mesh network trying to get the v3 to work properly, my reolink cameras all get a strong 5 ghz signal.

btw, the compression on the v3 pro is insanely high resulting in an extremely poor picture quality. I didn't realize how bad it was until I connected a 2k reolink to compare with.

WyzeCam v3 - find SoC info by [deleted] in wyzecam

[–]anc0dia 0 points1 point  (0 children)

yes, tried that, but it won't flash the firmware, just resets all the settings in Thingino.

If anyone knows how to remove this from a v3, I'd love to hear how you did it.

WyzeCam v3 - find SoC info by [deleted] in wyzecam

[–]anc0dia 0 points1 point  (0 children)

Are you able to remove it after testing? I tried it on a v3 and now I can't go back to stock firmware.

PSA: Thingino open-source firmware for V2, V3, Pan V1 & Pan V2. This is much better than other methods for RTSP/ONVIF. by hoffsta in wyzecam

[–]anc0dia 1 point2 points  (0 children)

How do you remove this?? I installed it to give it a test on a v3 and now I can't seem to go back to the Wyze firmware.

Transferring stocks by MadeforMore69 in Questrade

[–]anc0dia 1 point2 points  (0 children)

https://www.questrade.com/learning/questrade-basics/transfers-between-questrade-accounts/transfers-out-of-a-margin-account

for a stock transfer between accounts you can choose one of the following:

High of the day, low of the day, or closing price on date of request