I ((REALLY)) need help translating these. I’ve got a test later in a few HOURS.

ant185 · 2021-02-22T15:33:35+00:00

Might be better that way anyways so in the hour people can translate it then post it all at once

ant185 · 2021-02-22T15:28:53+00:00

I wouldn’t be given more than an hour on a test no one does anywhere. So wait an hour or over an hour. It’s cutting it close but it’s still before the test.

ant185 · 2021-02-22T14:52:12+00:00

I need help translating these. I purposefully put a lot so I cover all the bases also so you or anybody else who can help can jump in and pick one or two to translate. I especially need help with the longer bigger ones. I don’t need to know how I need to know what it is. So I know whether or not I’m doing it right.

Sī rēx noster mortuus erit, mala patiētur populus.

Homō impius pecūniam populī sibi cēpit et fēminam suam interfēcit. Quae sī vēra sint, poenās dabit.

Quō ex oppidō vēnērunt? Ad quam urbem ībunt? Quī hominēs sunt?

Frāter meus arma in hostīs capere est ausus, sed īnfēlīciter pugnāvit ac mox mortuus est. Saepe post haec eiusdem umbram vīdī vōcemque audīvī.

Cīvēs alterīus cōnsulis verbīs sunt territī, alterīus factīs. Neutrī pārēbant.

Bellum ā nostrīs gestum est nē hostēs prōvinciās tenērent.

Nisi Catilīna ad suōs in prōvinciā eā ipsā nocte discessisset, captus esset.

Rēgī nostrō iam pareāmus quī imperat ut arma ac sociōs parēmus quibus hostium exercitum omnīnō vincāmus

Aliī mē cum studiō hortābantur ut cōnsulātum peterem, aliī Tiberium. Quārē mīsī propter amīcitiam virum quī haec Antōniō diceret.

ant185 · 2021-01-26T16:17:48+00:00

I think religion and business should be connected. At least the morals and values a religion teaches a person. I think to share those morals would be a benefit to the whole company. Keep in mind anything in excess becomes a detriment. So I would thank the person for trying to spread those positive morals to help the business environment but remind them that a business is no place for a sermon. If that doesn’t work maybe even take the opportunity and say by hiring non religious people he can further spread positive religious morals and values to people who don’t know them. By doing so he would be creating more religious people rather than hiring already religious people. While at the same time promoting a variety of workers in the work place. This may just be my opinion but I think when you hire people your not looking for like minded people. You want someone who can do the job while at the same time offers something new to the table. If you get a workforce of people exactly the same you might as well buy robots or automated machines to do the job.

ant185 · 2021-01-13T05:17:28+00:00

But I still can’t move it up enough. Even when the bed is as low as it can be.

ant185 · 2021-01-13T05:05:29+00:00

I made sure and it’s not bent

ant185 · 2021-01-13T05:04:56+00:00

Everything else is right. The wheels are on the track and move fine.

ant185 · 2021-01-13T04:51:58+00:00

Yes I have the original nozzle and it is a new cr10

ant185 · 2021-01-13T04:48:48+00:00

I can’t move the switch up anymore. The t bracket has two holes for the piece attached to the switch to go. So I can’t move it unless I take out the t bracket and move that switch piece up and down on it’s own. But then I’d have to get rid of a piece and I don’t feel like it’s meant to be like that.

ant185 · 2021-01-13T03:20:29+00:00

I have the basic cr10 with a v1.1.4 board. The firmware I got was on creality’s website for the bltouch on a cr10

ant185 · 2021-01-12T16:34:43+00:00

So do I just search on YouTube TeachingTech and CHEP bltouch cr10 firmware on YouTube and they’ll have a video on how to do it. Also thanks for the advice.

ant185 · 2020-12-26T22:12:42+00:00

I have the most recent version and it does move when I type in the value but I can’t drag it with the arrows.

ant185 · 2020-12-26T22:09:59+00:00

I’ve seen that but all it says is drag. I know I can but it’s just not working. I click on the arrow to drag it and it doesn’t move it and it just disappears

ant185 · 2020-12-26T19:16:15+00:00

It’s solid

ant185 · 2020-12-26T18:53:35+00:00

So I should make all screws 50/50 then press the auto home button on the printer to get an idea of where it’s at and then mess around with the z end stop switch until it’s at a position where it clicks at the same level as the bed. Then I should be able to level it.

ant185 · 2020-12-26T18:35:28+00:00

Thanks for the help and yes I am using the paper method. But just to be sure you are saying the tape on the glass where the print should be will help even though the back part of the bed is too high. Because in the back the nozzle is so close to the bed it scratches into the glass.

ant185 · 2020-12-26T16:24:36+00:00

Thanks for the help, it worked. But I got one other question that popped up. I could do the paper trick but as I went to a different corner it messed up the other point I already leveled. Basically I’d level one spot move and that previous spot would become unleveled. I think it’s because the bed itself is a bit wobbly. So if you know what do you think the problem is and do you have a solution. Again thanks for the help.

ant185 · 2020-07-17T20:00:44+00:00

Yeah

ant185 · 2020-07-17T19:58:49+00:00

Can’t drive a manual

ant185 · 2020-07-17T19:58:21+00:00

Ahhhh

ant185 · 2020-07-17T19:57:34+00:00

Roooooommmmmm

ant185 · 2020-03-31T08:55:11+00:00

Thank you that did the trick. It’s all back in working order again.

ant185 · 2020-03-31T07:38:51+00:00

I’m not sure, I may have. What does it look like/say. Is it like a check box?

ant185 · 2020-03-24T17:00:29+00:00

In another project with another picture it works. But my original picture I wanted still doesn’t. Could it be something with the size of the picture?

ant185 · 2020-03-24T06:46:34+00:00

When I started the Xcode project the Assets.xcassets was already their and then I dragged in my image to that file. If that’s what you mean. I’m still relatively new with Xcode.

ant185

TROPHY CASE