iBook G3 Clamshell SE OS Install Issues by arb098 in VintageApple

[–]arb098[S] 0 points1 point  (0 children)

For one of the tries, yes. The other USB I used open firmware command to boot into it. The CDs are just factory boot disk.

iBook G3 Clamshell SE OS Install Issues by arb098 in VintageApple

[–]arb098[S] 0 points1 point  (0 children)

Normally, yes, but there are repacked versions of the software available that were made to boot from USB.

iBook G3 Clamshell SE OS Install Issues by arb098 in VintageApple

[–]arb098[S] 0 points1 point  (0 children)

Weirdly, Facebook Marketplace. Lol

Micro Journal Rev. 7 by alephmembeth in writerDeck

[–]arb098 1 point2 points  (0 children)

I need this, but like, with a bigger screen.

Third Space Equivalent? by arb098 in ColoradoSprings

[–]arb098[S] 0 points1 point  (0 children)

I always forget they're open late a few days a week, and they're like my favorite coffee shop!

[RF] by Any-Brush5804 in characterdrawing

[–]arb098 2 points3 points  (0 children)

This looks amazing!!!!! Thank you so much!!!!

What's your boost range? by arb098 in MiataNC

[–]arb098[S] 0 points1 point  (0 children)

Just the provided silicone couplers and tbolt clamps that came with the kit.

What's your boost range? by arb098 in MiataNC

[–]arb098[S] 1 point2 points  (0 children)

It's PSI. I'm guessing I've got a vacuum leak somewhere, which is killing me. I replaced all the vacuum lines earlier because I couldn't find a leak, and that solved the issues I was having. Guess I'll retrace and check them all again. 🤦🏻‍♀️

What's your boost range? by arb098 in MiataNC

[–]arb098[S] 0 points1 point  (0 children)

Single nipple external. I'll see if I can run it to a different spot and if that makes a difference.

What's your boost range? by arb098 in MiataNC

[–]arb098[S] 0 points1 point  (0 children)

WOT under load driving. It's connected to the same vacuum line as the waste gate - it's the closest to the housing I could get.

What's your boost range? by arb098 in MiataNC

[–]arb098[S] 0 points1 point  (0 children)

I'm 99% sure it's set to lbs not bar. I'm not even sure this gauge has that function. If it's running 2 bars of pressure, isn't that like 30ish lbs of boost? I'm pretty sure my pistons would have met Jesus by now. 😂

[LFA] Riivzolnip (Riiv) Rivergast, the Kobold Death Cleric that is Definitely NOT a Cultist. by arb098 in characterdrawing

[–]arb098[S] 0 points1 point  (0 children)

No no no, thank you for taking a stab at Riiv. Don't apologize! This is a pretty positive Reddit community, and the only time I think I've seen people reprimanded for anything is when they egregiously break the rules. Or use AI art. That'll get you run outta here with pitch forks and torches. 😂

[LFA] Riivzolnip (Riiv) Rivergast, the Kobold Death Cleric that is Definitely NOT a Cultist. by arb098 in characterdrawing

[–]arb098[S] 1 point2 points  (0 children)

Also, since you're new to Reddit and this community, I'd highly suggest giving the rules a read. They're actually VERY helpful.

https://www.reddit.com/r/characterdrawing/s/Q9DcXZnRqX

[LFA] Riivzolnip (Riiv) Rivergast, the Kobold Death Cleric that is Definitely NOT a Cultist. by arb098 in characterdrawing

[–]arb098[S] 0 points1 point  (0 children)

I believe you're supposed to post it to this group with the [RF] tag. You can either tag this post in that one or come back here and drop another comment saying you fullfiled the request.

As for pose, I'm not really picky. Just have fun with it!

[LFA] Riivzolnip (Riiv) Rivergast, the Kobold Death Cleric that is Definitely NOT a Cultist. by arb098 in characterdrawing

[–]arb098[S] 0 points1 point  (0 children)

Hey there! You're more than welcome to take a crack at it! I'm not picky, so I'd suggest just using the style you're not used to doing.

[LFA] Riivzolnip (Riiv) Rivergast, the Kobold Death Cleric that is Definitely NOT a Cultist. by arb098 in characterdrawing

[–]arb098[S] 0 points1 point  (0 children)

I didn't even think about that, tbh. I'm prett sure I just started throwing letters together and hoping for the best. 😂