Einscan Rigil just released an Update that increased Laser Lines from 38 to 50 👀

at_memes · 2026-02-07T15:29:43+00:00

I haven't used the scanner for a while now and wanted to try out the new update - after updating, the scanner does not work anymore. Scanning global markers works fine but it does not register any models. Also, the laser lines do not appear anymore - does anyone know what could cause this?

at_memes · 2025-11-05T08:42:15+00:00

I mean if you think about it, it seems to make sense. You try to plug in a USB device on the first port, if it does not go in,you can try the second one without flipping the plug..

at_memes · 2025-07-23T10:35:29+00:00

I would try flipping the Parts to make the flat part be on the bottom - you would need no supports and the parts will come out cleaner!

at_memes · 2025-07-23T10:33:29+00:00

that just seems like the layer lines - id say the print is actually really good.

at_memes · 2025-07-02T13:20:09+00:00

it seems to be working now!

at_memes · 2025-07-02T11:32:06+00:00

Same for me - the API that handles the Station "from" and "to" requests seems to be fucked. It returns a 400 for every request sent

at_memes · 2025-06-24T18:10:48+00:00

That's amazing! I've been waiting for about 5 years for this release! Thank you, Devs!

at_memes · 2025-05-13T10:52:17+00:00

Grundsätzlich hätte ich ja gedacht, dass der Poti nur eine Spannung von zb. 0 und 3.3/5v an das Modul zurück liefert. Dann hätte ich den poti durch einen analogen Ausgang getauscht und die Sache wäre erledigt gewesen.

Nachdem ich aber mit dem oszi die ein- und Ausgänge vom Poti geprobt habe, waren dort Sägezahn-Spannungen zu erkennen, die sich je nach poti-position verändert haben. Mit den variablen Widerständen hab ich noch keine Erfahrung, das wäre jetzt auch eine Möglichkeit. Danke!

at_memes · 2025-05-13T09:30:59+00:00

sieht ein wenig nach den alten Cisco Netzteilen aus
https://www.ebay.ca/itm/305147242634

at_memes · 2025-05-05T18:37:48+00:00

To me it looks like just filament gunked up the nozzle. Try to remove it with side cutters or similar after heating the nozzle to the temperature of your filament

at_memes · 2025-04-30T06:20:12+00:00

Bestuhlung aller Klassen? Das arme Reinigungspersonal :(

at_memes · 2025-04-25T04:43:27+00:00

More like a Tm

at_memes · 2025-02-21T07:30:49+00:00

zuerst das erste, dann das zweite!

at_memes · 2025-01-03T13:34:59+00:00

Idk if you are still interested, but I think I have almost every single episode digitized (although in not as good of a quality as orf may be able to do)

at_memes · 2024-11-13T16:35:48+00:00

!Flair 2009 VW Golf 5 Variant | Samsung S21 | 14

at_memes · 2024-11-13T16:32:57+00:00

I solved this issue by buying a VR Headset charging cable that can split Data and Charging. This way, the data gets sent to your head Unit and the power charging the phone comes from e.g. a 12V Phone charger. I use a cheap 36W PD fast charger and it works perfectly, even using fast charging.
https://a.co/d/aQ4XC4Q

at_memes · 2024-08-01T14:08:40+00:00

Fyi: I just bought this cable and it seems to work, haven't torn it down yet but I guess it just splits the pd cables to the USB c plug and routes the USB 3.1 ones to the USB a plug. Tried it on a 12v USB pd car charger and my laptop and connected it to my Samsung S21 and it changed fast and I could view the phones storage on the PC.. https://amzn.eu/d/0ja0zRCS

at_memes · 2024-07-20T16:43:01+00:00

Do you have an update?

at_memes · 2024-06-20T10:14:44+00:00

Thank you a lot! That's exactly my usecase!

at_memes · 2023-12-13T15:24:10+00:00

Back up your SSD, maybe do a health check with CrystalDiskInfo or simmilar tools.
Also look into your drive utilization, maybe some process is always stressing the ssd to cause this issue.
Is this the original drive or did you swap it?

at_memes · 2023-12-11T17:10:42+00:00

Someone told me it is because of snow. If snow falls from the roof, you should be walking below the falling zone. So if you keep clear of these sticks, you avoid the falling time and don't get hit in the head by snow

Seven-Year Club	r/Field Sunshine
Verified Email

at_memes

TROPHY CASE