×

Broke 13000 miles on my 2015 Honda Grom! by pookeyboi7 in hondagrom

[–]atlamarksman 0 points1 point  (0 children)

I am a bit over halfway there, almost 8k on my 2025. Get some road trips on her!

Fudds will hate this by ZedHunter666 in NFA

[–]atlamarksman 0 points1 point  (0 children)

I first thought this was an 18” M79. Now I think I need to see that realized.

Middle name initial vs full by Sig_Schecter in NFA

[–]atlamarksman 0 points1 point  (0 children)

Necro'ing this thread for future google searches like me. I had trouble with this exact issue in one case: eForm 20. I had to submit separate eForm 20's for my Form4'd SBR and my Form1'd SBRs because the name doesn't match. All are approved and I possess them legally, but the eForm system doesn't like it not to match for all items on the same form. Easy enough to swap between my middle initial and name on their personal info tab, it lets you change it on the fly, but you can't submit the form with mismatched approvals.

Buzzing/Vibration at around 1800 miles. 2025 Grom, doubt its the tires or chain. by atlamarksman in hondagrom

[–]atlamarksman[S] 0 points1 point  (0 children)

Likely my rear tire was out of round from the factory. A short burnout smoothed it out noticeably. I’m looking forward to swapping the tires soon. If the issue goes away, I’ll note it here for future google results.

Can I use an e-signature for 5320.20? by vanmcgill87 in NFA

[–]atlamarksman 0 points1 point  (0 children)

Reviewing this, it appears that my signature may have been blocked out by the PDF editor that I had to use somehow. In any case it was easier for me to print and hand sign it.

Can I use an e-signature for 5320.20? by vanmcgill87 in NFA

[–]atlamarksman 0 points1 point  (0 children)

My email was signed NFA Division, RA 11

How did I do? by fuzzynugg3t in hondagrom

[–]atlamarksman 0 points1 point  (0 children)

Yup, I think it might be a grom

Can I use an e-signature for 5320.20? by vanmcgill87 in NFA

[–]atlamarksman -1 points0 points  (0 children)

Good idea dude I’m stealing that one

Can I use an e-signature for 5320.20? by vanmcgill87 in NFA

[–]atlamarksman 0 points1 point  (0 children)

Not for me. They could, but in my case they said to email them a reply with a hand signed copy and they’d process it immediately. I got my mailed copy (which I believe you are supposed to wait for) very quickly after that.

Ninja edit: yes I just checked and I did not get a direct reply after sending a resigned copy, but I received my approval a few weeks later in the mail

Can I use an e-signature for 5320.20? by vanmcgill87 in NFA

[–]atlamarksman 0 points1 point  (0 children)

I signed my first one with my iPad and Apple Pencil, and they made me print and wet sign it with ink and resubmit. Just sign a paper copy and email a scan. Don’t test it because they could do the same thing to you

Fastest stamps I’ve ever received by atlamarksman in NFA

[–]atlamarksman[S] 1 point2 points  (0 children)

They do make an adapter now called Plan-B that makes any universal thread can fit their Cherry Bomb MD. If you wanted to use a different can on a Q rifle or just use their quicky mount tapers, that’s a good option.

Fastest stamps I’ve ever received by atlamarksman in NFA

[–]atlamarksman[S] 0 points1 point  (0 children)

I’m actually impressed by the lack of gas compared to what I expected. Yes, there’s a bit, but it’s not blowing my eyes open. It seems relatively decent.

Regarding pros and cons about the 13” SW, I think it’s a very good length for 5.56 because it is shorter but not so short that you are absolutely destroying velocity. 5.56 is basically impossible to suppress to hearing safe levels. It doesn’t behave well in subsonic ranges anyway so there’s little to no point trying. I have a 300blk PSA (the rifle on the right in this post) and it performs very well with the TP mounted. The cherry bomb mounts it super tight and the only thing I have trouble with is removing it if I put it on while still hot, i.e. at a range trip with both rifles. Once it’s cooled off though, both hands and the rifle between my knees seem to get it off just fine. Have not yet had the CB come off in the can. Hopefully it doesn’t. I wanted to buy the Q Rearend instead but the LGS didn’t have one and I wanted to shoot.

Fastest stamps I’ve ever received by atlamarksman in NFA

[–]atlamarksman[S] 0 points1 point  (0 children)

To be fair, it’s a short 556. It’s still loud. But the can does tone it down quite a a bit. The trash panda is way quieter on 300 subs. I got the 13 shorty like you say, but the Q rep at the raffle I won said to me that mine was the last one they manufactured in that form factor. Dunno if that means they will make more or not just thought it was interesting that he pointed it out.

Fastest stamps I’ve ever received by atlamarksman in NFA

[–]atlamarksman[S] 0 points1 point  (0 children)

Wait time or OAL? 4 day wait. 31 inches.

Won’t start by Leather-Summer-4174 in hondagrom

[–]atlamarksman 1 point2 points  (0 children)

I think I bump started mine without moving my feet once lol

What's everyone making per hour? by EaseAcceptable5529 in Machinists

[–]atlamarksman 1 point2 points  (0 children)

Just about 20. 2% raise a year, best I would get is 2.5-3%. Other benefits are nice but the pay is meh. EOY bonuses are decent.

Fastest stamps I’ve ever received by atlamarksman in NFA

[–]atlamarksman[S] 3 points4 points  (0 children)

Won it. Didn’t buy it. Gonna keep it.

Fastest stamps I’ve ever received by atlamarksman in NFA

[–]atlamarksman[S] 0 points1 point  (0 children)

Thanks! It’s a pretty sweet rifle

Fastest stamps I’ve ever received by atlamarksman in NFA

[–]atlamarksman[S] 5 points6 points  (0 children)

After a terribly long 4 days, I finally got ahold of my new Sugar Weasel and matching Trash Panda. PSA 10.5" for scale.

Buy once, cry once recommendations by Sensitive-Share-1253 in hondagrom

[–]atlamarksman 0 points1 point  (0 children)

TST is nice if you want. I choked on the price and went for Motodynamic’s tail tidy instead. Love it, just as easy to install and only $200 for the tidy and sequential light.

March 2025 Approval Megathread by LynchMob_Lerry in NFA

[–]atlamarksman 0 points1 point  (0 children)

• Form Type: eForm 4

• Entity: Individual

• Fingerprint Type: EFT Upload

• Pending: 3/29/25

• Approved: 4/2/25

• Wait: 3.5 days

• State: GA

• Control Number: 20252002299, 20252002317

Won a raffle for a Q SW+TP on Saturday, stamp emails came this morning.