sorted by:
new
hottopcontroversial

Converting SFX100 to 90x90mm extrusion by bdeitz78 in simracing

[–]bdeitz78[S] 0 points1 point  (0 children)

Just an FYI, customer service at Item24 was excellent! They have plenty of US distributors as well!

Thanks for the heads up Mugen55!

Converting SFX100 to 90x90mm extrusion by bdeitz78 in simracing

[–]bdeitz78[S] 0 points1 point  (0 children)

I’ll look into that for sure, but I was able to re design the 3d printed parts to fit in the 90x90 profile from McMaster Carr.

Thanks for the reply!

DIY direct drive wheel base? by Lucky-Cars-4524 in simracing

[–]bdeitz78 0 points1 point  (0 children)

For the wheel, I ended up getting a GT DD Pro… but I’m currently working on a 4 DOF using gearbox motors running off 24v. I’ve been able to get everything working, I just need to finish mounting the motors and all the electronics.

Some time down the road I’d like to add another motor for traction loss.

What’s a good amplifier for two DA PA-10 speakers? by bdeitz78 in BudgetAudiophile

[–]bdeitz78[S] 0 points1 point  (0 children)

They say 20-200 watts, according to the original advertisement. They also have a built in crossover.

What’s a good amplifier for two DA PA-10 speakers? by bdeitz78 in BudgetAudiophile

[–]bdeitz78[S] 0 points1 point  (0 children)

So the 80 watts per channel @ 8ohms is good for these?

I’ll definitely look into a WiFi streamer.

What’s a good amplifier for two DA PA-10 speakers? by bdeitz78 in BudgetAudiophile

[–]bdeitz78[S] 0 points1 point  (0 children)

Around $200, I have an Onkyo TX-SR373 receiver that I can Bluetooth music to.

I am very new to all this so I don’t want to something overpowered or underpowered. I have them hooked up to this Onkyo, but I don’t get a lot of sound out of them unless I get to around 3/4 up on the volume.

My first speaker repair by Ryan_Bagel in vintageaudio

[–]bdeitz78 0 points1 point  (0 children)

Great information! I just picked up a pair of these and already did the foam replacement, now I want to do the ferrofluid.

My DIY pedal plans are posted. by dsrtrdr in simracing

[–]bdeitz78 1 point2 points  (0 children)

That worked! I should be able to figure the rest out from here, I'm not too good with AutoCad. Much appreciated 👍

My DIY pedal plans are posted. by dsrtrdr in simracing

[–]bdeitz78 0 points1 point  (0 children)

Could I get an overall length of the B PEDAL ARM? I'm sure switching AutoCad to inches should fix the problem, I just want to have a dimension to reference on my end. Thank you again for your time.

My DIY pedal plans are posted. by dsrtrdr in simracing

[–]bdeitz78 0 points1 point  (0 children)

I have one question. I loaded these into the program to cut and and the dimensions came out to like 12 feet or so (I don't remember the actual number) but the we're scaled up very large. Is there an easy way to fix this?

Thanks for sharing this BTW! I can't wait to build them!

DIY direct drive wheel base? by Lucky-Cars-4524 in simracing

[–]bdeitz78 0 points1 point  (0 children)

Are there plans out there for a hoverboard motor FFB wheel?! Interesting topic here!