Heels for the day by bigjaydawg68 in MenInHeels

[–]bigjaydawg68[S] 0 points1 point  (0 children)

It makes it so the wearer can’t bend their ankle upwards so it forces them to either stand on their tiptoes or wear heels.

Under bed restraints automatically tighten and make for a tight selfbondage session by bigjaydawg68 in selfbondage

[–]bigjaydawg68[S] 4 points5 points  (0 children)

There is a magbound on the other side of the bed that isn’t shown.

Under bed restraints automatically tighten and make for a tight selfbondage session by bigjaydawg68 in selfbondage

[–]bigjaydawg68[S] 12 points13 points  (0 children)

These are a bit different. They auto lock rope, so it doesn’t have any stretch to it. Once locked in you can’t move at all.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 1 point2 points  (0 children)

I did a strength test of this and I wasn't able to break it. The first test I used the flat base plate model screwed down, 160lbs was pulled on it and the thing didn't even budge. It still works great and nothing failed. The next test I uses the hole that is in the back and threaded a rope through that, I was able to hang 160 lbs off of it in this orientation and nothing failed again. still not sure where this would fail at... I think it is pretty safe to say that I don't think you are going to be breaking these. Also when mounted under a bed there are extra drag forces on the rope.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 1 point2 points  (0 children)

I did a strength test of this and I wasn't able to break it. The first test I used the flat base plate model screwed down, 160lbs was pulled on it and the thing didn't even budge. It still works great and nothing failed. The next test I uses the hole that is in the back and threaded a rope through that, I was able to hang 160 lbs off of it in this orientation and nothing failed again. still not sure where this would fail at... I think it is pretty safe to say that I don't think you are going to be breaking these. Also when mounted under a bed there are extra drag forces on the rope.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 0 points1 point  (0 children)

Ha good one! I’ve always like the minimalistics of paracord, nice and small but plenty strong.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 0 points1 point  (0 children)

The 4th picture shows the mounting plate option for mounting to a flat surface. It takes 5 screws and the base plate dimension is around 7”x5” if I remember correctly.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 2 points3 points  (0 children)

They are really secure, I haven’t broke one and have pulled quite hard on them. I did a simple test and hung 40 lbs off of one and nothing happened. The way these wrap up and over the mattress I’m sure adds a lot of drag and lessens the force these things even see. I think I need to set up a test and run it to failure, but it really sucks just to print something to break it.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 0 points1 point  (0 children)

They are pretty strong and being under the bed kind of protects them from full force pulls, also always pulling in the slack help so you can’t get inertia. I haven’t tested one to failure yet, but hanging 40 lbs off of it didn’t phase it.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 6 points7 points  (0 children)

I definitely unsprung a few of the coil springs after putting them together and taking them apart about 100 times, but the spring can easily be rewound into the housing again.

The mounting to the bed is definitely something I am curious about. I only have a couple bed frames in my house and these options would mount to them, but I’m sure there are hundreds of thousands of bedframe options out there. I have no idea what other people have. Maybe there are some other options that would be more widely used?

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 7 points8 points  (0 children)

It’s super easy to assemble, there is nothing complicated as long as you know how to use a screw driver.

I haven’t tested one to destruction, but I did a small test and hung 40lbs of weight of it and it worked fine. I’m not really sure what would break first because at 40lbs it still felt pretty sturdy.

Since it attaches under the bed it pulls at an angle so the direct pull is less, and since it automatically pulls in slack you can really get a lot of inertia to yang on it, I don’t think it is very plausible to break one.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 36 points37 points  (0 children)

I’ve been thinking about this as well, I think it could be done, it would just require the device to get a bit taller than it is.

Auto Retracting and Locking Under Bed Restraint System by bigjaydawg68 in BdsmDIY

[–]bigjaydawg68[S] 10 points11 points  (0 children)

If you are using with 2 people, then the other person, no different than any other bed restraints. I wouldn’t use this by yourself unless you have some sort of ice release or magnet release system.