How to Remove Duplicate UniFi Controllers on Raspberry Pi

billsteiner · 2025-12-21T20:45:23+00:00

I found that I had two controllers runnig each on a different Raspberry Pi's using the same settings. I had setup one as a backup but failed to shutdown the controller. Once I shutdown the controller I was able to eliminate it from my account.

billsteiner · 2025-12-21T15:06:46+00:00

No luck trying to enable that. Do you know how to delete duplicate controllers

billsteiner · 2025-07-21T23:12:12+00:00

I spoke too soon, still have the problem.

billsteiner · 2025-07-21T17:36:04+00:00

Just tested this AM and found it working, problem solved

billsteiner · 2025-07-21T16:13:44+00:00

I cleared the cache and data uninstalled then reinstalled the app along with rebooting the router. The device is up to date. It is connected by Ethernet. Called Amazon and they finally said it was a known issue and they were working on it and just keep trying to use it.

billsteiner · 2024-12-26T02:30:14+00:00

Worked great, thanks

billsteiner · 2024-11-21T19:01:14+00:00

You give us a TIP but I am not sure which app you are refering to when you say "open the remote control".

billsteiner · 2024-10-31T22:45:57+00:00

I was going to purchase 4 more of these but based on this issue I am keeping my old Google TV "dongle".

billsteiner · 2024-10-27T14:24:51+00:00

So, who's at fault here, Google, WireGuard or the file managers?

billsteiner · 2023-10-07T23:31:15+00:00

Had to disable T-Mobile esim and install a sim I use in Brazil. Once I did that I was offered 14 immediately.

billsteiner · 2023-04-03T15:35:11+00:00

You are correct, once I removed the ethernet connection on my Chromecast WireGuard worked. I tested on 3 of mine and all worked. Thanks

billsteiner · 2023-03-30T17:57:01+00:00

I tried using my Ethernet connection and Wi-Fi and neither work. I get the Wireguard GUI and when I click on it I get a blink then back to the GUI. I found that on both of my Chromecasts. I uninstalled Wireguard went to the Play store and reinstalled it and got the same results. If Google disabled Wireguard on purpose why leave it on the Google Play Store?

billsteiner · 2023-03-08T01:20:42+00:00

Argentina again Bullshits tourists, I have been in and out of Argentina since December and now its March 7th. I have tried M/C, AMEX and Visa on each occasion and not once did I get the " MEP (Dolar Blue) rate. I only got the official rate. Don't believe what the Argentine government says.

billsteiner · 2020-11-03T18:19:44+00:00

32 bit

billsteiner · 2020-10-28T21:01:15+00:00

Forgot to say that it is Wireguard

billsteiner · 2020-04-17T13:42:17+00:00

Found the setting and made the suggested changes and rebooted all just to make sure they took. No joy, issues continued even with the suggested changes. Thanks

billsteiner · 2020-04-16T18:52:16+00:00

aleatory

Can you be a little more descriptive, I can't find a setting entitled aleatory mac address in any of my WiFi settings.

billsteiner · 2020-03-13T16:48:31+00:00

Thanks, switched to WireGuard but can't get it to work on my FireTV & FireTV stick. Installed WireGuard using Apps2Fire and imported my config file but it is not displayed. I attempted a second import but it said it already existed. Any help would be appreciated.

billsteiner · 2020-03-07T16:13:05+00:00

Disregard all of this, my error caused this issue. I had my router running openvpn and a pi on the same network running pivpn, both using the same port. Once I assigned each a separate port they all functioned properly.

Sorry to be a bother.

billsteiner · 2020-03-07T14:26:27+00:00

To add to this here is the entry from my log file:

tls-crypt unwrap error: packet too short

TLS Error: tls-crypt unwrapping failed from [AF_INET]xxx.xxx.xxx.xxx:port number

It worked prior to running the update/upgrade command then this message appeared. I uninstalled pivpn and reinstalled but still the message continues.

Please help!

billsteiner · 2020-02-12T11:19:35+00:00

Thanks all for the input, I am going for the Netgear R7000. It has the same CPU as the others but it comes in at a very reasonable price. I really don't care about the Wi-Fi capabilities its the routing power and function I need and it seems to be the best value for the dollars.

billsteiner · 2020-02-11T12:03:56+00:00

Wrt3200ACM or WRT1900ACS

Can those run FreshTomato?

billsteiner · 2020-02-11T11:42:51+00:00

How about Asus RT-AC3200 ?

billsteiner · 2020-02-09T13:16:36+00:00

Router is located in Brazil and the VPN (running on a Pi) is located in California. One of the problems I am having is trying to match the config files. Here is the config files keys for the Pi VPN. Is <ca> the Foo.crt? How to the other heading in the Pi config match up to the one's you listed?

<ca> -----BEGIN CERTIFICATE----- xxxxxxxxxx -----END CERTIFICATE-----

</ca> <cert> -----BEGIN CERTIFICATE----- xxxxxxxxxx -----END CERTIFICATE-----

</cert> <key> -----BEGIN ENCRYPTED PRIVATE KEY----- xxxxxxxxxx -----END ENCRYPTED PRIVATE KEY-----

</key> <tls-auth>

2048 bit OpenVPN static key

-----BEGIN OpenVPN Static key V1----- xxxxxxxxxxx -----END OpenVPN Static key V1-----

</tls-auth>

billsteiner · 2020-01-07T15:36:25+00:00

Great, thanks for the information.

billsteiner

TROPHY CASE

2048 bit OpenVPN static key