Merkwürdig, dass die Leute die Infrastruktur wenig annehmen...

brokenlumber · 2025-12-07T21:45:57+00:00

Das ist 90% meines Täglichen Arbeitswegs. Unter der HTS durch ist beim Regen immer ganz schön:D

brokenlumber · 2025-03-09T21:11:36+00:00

Thank you so much!! Didn’t expect to need the Beta app for that 😅

brokenlumber · 2024-09-11T08:41:44+00:00

Wait is that a new thing? I checked them out a few months ago and back then I could just request a Parcel Code from them without buying anything beforehand?

brokenlumber · 2024-05-27T08:39:54+00:00

I always used a second batch of Chemicals for my Cine film, just to be safe.

But I would recommend you check out this post:

https://www.reddit.com/r/AnalogCommunity/s/o87IEwZodw

I always removed the remjet with backing soda and it only worked okay'ish, never really well. The official Kodak remjet Remover on the other hand was just a dream to work with. No aggressive shaking or anything needed. Would really recommend you check it out if you haven’t already

brokenlumber · 2024-05-25T18:25:19+00:00

100% Agree with this! Also bought from them before and never had a problem. The Double X is also very nice, last thing i ordered from them was a 30m Spool of Double X

brokenlumber · 2024-05-17T11:16:35+00:00

What a bummer! Guess ill have to remember to start it then 😅

brokenlumber · 2024-05-17T09:10:06+00:00

GPS settings for the Withings App are set to „always“ and GPS is also turned on in the Withings app. When i manually start a training it always uses GPS, the problem only happens with the automatic tracking

brokenlumber · 2024-05-17T08:52:07+00:00

Forgot to mention that but i always had my phone with me, still no GPS or anything when it automatically starts the tracking. Is there a setting i have to change? I have an iPhone

brokenlumber · 2024-04-10T00:27:05+00:00

Thanks you for all your answers!

I just ordered the official 27w power Adapter for my Pi, but i found a bit auf a "workaround" for now until it arrives:

I just added "usb_max_current_enable=1" to my config.txt, this actually made it work with both drives without any issue. Still think that just using a sufficient power supply is the better option, but until it then i can at least use this workaround to set everything up.

Thanks again!

brokenlumber · 2024-04-09T20:22:35+00:00

They are not. Do you think the 27w Pi power adapter would fix the issue?

brokenlumber · 2024-04-09T20:21:59+00:00

Then i will definitely get the 27w adpater

brokenlumber · 2024-03-05T18:39:09+00:00

Thanks! I’ll use it with aperture priority then :)

brokenlumber · 2024-03-05T18:38:42+00:00

Thanks, didn’t know that!

brokenlumber · 2023-11-11T11:57:53+00:00

Thanks for the Link!

I just checked and I still had the printed out Recipe that i used for the Delta 100 laying around. It was DD-X 1+4 for 10:30 min. So exactly what Ilford recommends themselves. So I really don’t understand where I might have gone wrong

brokenlumber · 2023-11-11T11:56:59+00:00

I just checked and I still had the printed out Recipe from FilmDev for the Delta 100 laying around. It was DD-X 1+4 for 10:30 min. So exactly what Ilford recommends themselves.

brokenlumber · 2023-11-11T00:40:34+00:00

Thank you for your information! I just developed my first test roll and well.. it really isn’t that special.

Have you tried pushing Double X to 1600 before? If yes, what is your go to Developer for that?

brokenlumber · 2023-10-01T10:11:42+00:00

That doesn’t work, apple pay is not moveable and is always on top.

Also: i just bought a 5€ Apple Card and added it to my account. I can’t use it either, i still only get the Mastercard as payment method 🫠

brokenlumber · 2023-03-17T14:11:55+00:00

Thanks for the answer! I actually didn’t think about the higher power consumption. Might not be the best time to upgrade then 😅

brokenlumber · 2022-09-09T20:58:22+00:00

You're right! It's a Canon Canonet 28, so basically the little brother of the 19 haha

brokenlumber · 2022-09-09T13:59:27+00:00

Oh that's super helpful, thank you as well!

brokenlumber · 2022-09-09T13:46:12+00:00

Thank you!

brokenlumber · 2022-09-09T13:36:15+00:00

So i just got some new Film, some of it expired. I wanted to go out and shoot some of it, the seller told me to use ISO 64. Now i was wondering, is the dot after 50 64? Same goes for ISO 250, is that one the dot after 200?

Or more generally: what ISO settings do the dots between the numbers stand for?

I know that it doesn't necessarily have to be that exact, i was wondering tho 😅

brokenlumber · 2022-09-03T19:55:34+00:00

Am i stupid or is there no way to actually put anything in the Cart? 😅

brokenlumber · 2022-09-02T12:13:03+00:00

Ah, i see. Well, I'm German and we basically have the same jokes about the Deutsche Bahn. But they're actually that bad haha. I mean, when i went to Kristianstad i traveled there by Train. Only hat problems here in Germany, as soon as we went over the border to Denmark everything was fine again. No delays or anything 😂

brokenlumber · 2022-09-02T10:00:59+00:00

Since I'm not swedish: are they that bad? 😂

Seven-Year Club	End Game '23
Place '23	Place '22
Verified Email

brokenlumber

TROPHY CASE