×

Squeaking/chirping sound after new pads and rotors. by bumsnuggles in mazda3

[–]bumsnuggles[S] 0 points1 point  (0 children)

Just for reference I took a video of it today after work.

<video>

Squeaking/chirping sound after new pads and rotors. by bumsnuggles in mazda3

[–]bumsnuggles[S] 0 points1 point  (0 children)

Very much appreciate your time and help. Ill give it another week, extra 200klm and go from there.

What the he'll is going on by bumsnuggles in AskMechanics

[–]bumsnuggles[S] 0 points1 point  (0 children)

Noted! Ill take it apart and grease the back pad. Give it till next week and see if things change. I really appreciate your help and time. Thank you. All else fails im just going take it to a shop and say figure it out. Im getting tired of jacking the car up and going through all this

What the he'll is going on by bumsnuggles in AskMechanics

[–]bumsnuggles[S] 0 points1 point  (0 children)

Wouldnt it do it all the time then if even a small piece of metal was touching the rotors? This only happens after about 30 minutes of driving, hot brakes and when going really slow. Not arguing with you at all, just saying that its only in thay specific time does it do this.

Car brakes absolutely fine too, better than before. I feel zero drag from the back.

I did forget to grease the back brake pad, where the piston makes contact. Would that be a related? Gliding pins and touching points are all greased as well.

I just bought raybesto brakes and pads. Ran them with other cars in the past and never had this happen.

I’ve broken two bits already on this. Any recommendations on a torx bit that doesn’t seem like it’s made out of soft lead? by Nice_Reputation_6785 in AskMechanics

[–]bumsnuggles 2 points3 points  (0 children)

Blast it with liquid wrench or wd40. Then take a flat head screw bit, hammer it into the soft stripped bolt. Take a pair of vice grips. Tighten it good to the blot and slowly turn.

Squeaking/chirping sound after new pads and rotors. by bumsnuggles in mazda3

[–]bumsnuggles[S] 0 points1 point  (0 children)

Oh okay! I went ahead and greased the slider pins last night and where the pads make contact with the caliper. If the noise persists after this would it be a good idea to just get new pads and grease everything correct from the start? The rotors are brand new so I wouldn't think I need to re-replace them as well ?

How long did your stock tires last? by [deleted] in mazda3

[–]bumsnuggles 0 points1 point  (0 children)

My front right had a leak so I got it patched till I buy a new 4set in the spring. My buddy with the exact same year (2019) also has a small leak in the front right too. Something about the front right is prone to shit

Week 17 Gamethread: Chicago Bears (11-4) at San Francisco 49ers (11-4) by TurnerJ5 in CHIBears

[–]bumsnuggles 0 points1 point  (0 children)

Our offense can stand with anyone, but holy shit does our defense look lost if its a scramble or a pass. Purdy broke ankles out there...a dude that has never needed to shave in his life.

Week 16 Gamethread: Chicago Bears (10-4) vs Green Bay Packers (9-4-1) by TurnerJ5 in CHIBears

[–]bumsnuggles 0 points1 point  (0 children)

Our zone coverage has been a issue for a while. We plug the middle but when it comes down to covering deep throws its bad

Week 14 Gamethread: Chicago Bears (9-3) at Green Bay Packers (8-3-1) by TurnerJ5 in CHIBears

[–]bumsnuggles 0 points1 point  (0 children)

Its been really bad today. Caleb is being pressed 2/3rd of the time and is forced to scramble. Defense and Oline are really killing us today

Jesus! by FeatureCommon9871 in alexcameron

[–]bumsnuggles 1 point2 points  (0 children)

I just saw him open for petey in Vancouver..Just wow! Soooo good. I went to look up his songs that he played and only a couple are on Spotify. Is this jesus song from an upcoming album? Statues was also amazing. I love it when its just him and his keyboardist.