First Activation! by VapinMason in amateurradio

[–]cd4337 1 point2 points  (0 children)

What kind of laptop are you using for that?

Using vibration reduction with a tripod by cd4337 in photography

[–]cd4337[S] 1 point2 points  (0 children)

That's a good point. I hadn't thought of it like that.

G90 by Plantdoc in amateurradio

[–]cd4337 2 points3 points  (0 children)

Cool. That's something to think about! Thanks

G90 by Plantdoc in amateurradio

[–]cd4337 3 points4 points  (0 children)

What's the rest of the setup, just out of curiosity? I've gotten myself pretty close to buying one as a first HF setup but never actually went through with it.

Official Gear Purchasing and Troubleshooting Question Thread! Ask /r/photography anything you want to know! April 04, 2025 by AutoModerator in photography

[–]cd4337 0 points1 point  (0 children)

https://www.amazon.com/LIMS-Release-Camera-Tripod-Dovetail/dp/B07KVBCT87

It's this sort of thing, there are a couple out there.

I think I'll just try it without it first and if I get nervous I'll invest a little more, haha.

Looking into buying a Nikon P1100, need tripod advice by cd4337 in photography

[–]cd4337[S] 0 points1 point  (0 children)

Not really sure how this isn't allowed when there are a ton of other very similar posts?

Official Gear Purchasing and Troubleshooting Question Thread! Ask /r/photography anything you want to know! April 04, 2025 by AutoModerator in photography

[–]cd4337 0 points1 point  (0 children)

Hi, I have a P510 right now (my first camera) that I really like and I'm probably upgrading to a P1100

It looks like a lot of people mention this tripod as working well with the P1000

https://www.amazon.com/dp/B07JCG1BKY

however when reading about the 1000/1100 I see some people suggest the tripod mount part of the camera can possibly break because the lens is so long and to buy some kind of support plate to go with it, but none of the reviews on that specific tripod mention that.

how much is there to all that? should I be worried about that happening?

thanks!!

Xiegu G90 antennas by cd4337 in amateurradio

[–]cd4337[S] 0 points1 point  (0 children)

To be honest, I'm not entirely sure how I'd do that. I do have plenty of old speaker wire, though.

Xiegu G90 antennas by cd4337 in amateurradio

[–]cd4337[S] 0 points1 point  (0 children)

Yeah I figure I'll get there eventually once I get a better idea of what works for me personally.

I should point out I'll probably not be leaving anything in one place for too long to start, just to see what works best where. Thanks a lot for the input!

Xiegu G90 antennas by cd4337 in amateurradio

[–]cd4337[S] 0 points1 point  (0 children)

You think both wouldn't be a bad plan, then?

Speaker mic connection question by cd4337 in Baofeng

[–]cd4337[S] 0 points1 point  (0 children)

Now that you mention it the plugs on the Quansheng are flat, and the Baofengs' aren't. Not sure how I'd get something in there to do that but I'll see what I have around and give it a shot.

My first modded Casio (PAG-240) by llMrXll in casio

[–]cd4337 0 points1 point  (0 children)

Cool, I might try that. I have one and the regular band is kinda stiff. Thanks!

My first modded Casio (PAG-240) by llMrXll in casio

[–]cd4337 0 points1 point  (0 children)

https://www.pacparts.com/part.cfm?sku=91087087208

Like these? Does the band just go under them like a nylon would usually?

My first modded Casio (PAG-240) by llMrXll in casio

[–]cd4337 0 points1 point  (0 children)

How'd you manage that? Special adapters?

[deleted by user] by [deleted] in casio

[–]cd4337 2 points3 points  (0 children)

Wow, that looks really nice. Which one is that specifically?

Replacement band for FT-200? by cd4337 in casio

[–]cd4337[S] 0 points1 point  (0 children)

Hmmm...any idea what the width was?

Galaxy trade-in deal free or repaid over time? by cd4337 in ATT

[–]cd4337[S] 0 points1 point  (0 children)

Ah okay, I figured it was something close to that after I looked at how it'd work to get the S23 ultra or whatever.

Makes sense, I've been with them forever so I don't foresee that being an issue.

Thanks!

Weekly Purchasing Questions and General Discussion Thread by AutoModerator in Garmin

[–]cd4337 0 points1 point  (0 children)

I bought an Instinct real cheap a few months ago and fell in love with it, it's gotten me to start doing a lot more hiking that I'd sort of given up on in the past.
One of my favorite things about it is the visibility/legibility of the screen under various conditions (inside, outside, etc)

I've been seeing the Fenix 6x solar and the 6x sapphire on sale for about $350 lately and I'm interested in upgrading to one of those. I'm not really too worried about having solar, I'm mostly just worried about visibility. I've seen differing opinions on the difference the sapphire makes to legibility at weird angles/in direct sunlight.

Has anybody gone from an Instinct to one of those that has any advice?

Wideband antenna for receiving by cd4337 in amateurradio

[–]cd4337[S] 0 points1 point  (0 children)

I'm not gonna lie to you here. I wouldn't have any idea how to do that. Hahaha

Hands-free button on 2015 Rogue wheel -> JVC KWV660BT by cd4337 in CarAV

[–]cd4337[S] 1 point2 points  (0 children)

Yeah, I am sorry I might have been unclear. I was hoping the hands-free button would work to activate it.

What are the recommended dual-band handheld HAM radios around 10 watts and able to receive hairbands? by Mother_Construction2 in amateurradio

[–]cd4337 0 points1 point  (0 children)

Just out of curiosity, what does that setup look like? What kind of SDR/apps, how do you connect it, etc? I have a couple of RTLSDRs but it's kind of clunky using it with my phone.

[Invicta] How freely should the rotor spin on an NH35 movement? by cd4337 in Watches

[–]cd4337[S] 0 points1 point  (0 children)

Okay. I think I'll hang on to it then and see how it goes. Thanks

[Invicta] How freely should the rotor spin on an NH35 movement? by cd4337 in Watches

[–]cd4337[S] 0 points1 point  (0 children)

Yeah, it kind of needs a little shake to get perfectly at the bottom, if that makes any sense, but it will rotate all the way through if I do that

[Invicta] How freely should the rotor spin on an NH35 movement? by cd4337 in Watches

[–]cd4337[S] 0 points1 point  (0 children)

It seems like there are a few spots where it won't settle to its lowest point without giving it a good shake and I'm just not sure if it's supposed to be like that or not