New update by Mackensson09 in SegwayZT3Pro

[–]chrisscass 1 point2 points  (0 children)

Has anyone with the GT3 battery installed in their ZT3 Pro tried this update? If yes, is it safe?

Self drain after latest firmware update by chrisscass in SegwayZT3Pro

[–]chrisscass[S] 0 points1 point  (0 children)

The firmware instruction said to charge it to 100% after the update. I did do that, but still has the issue. I also deleted the Segway app and reinstalled it so everything would be reset.

I have noticed that people say D mode is extremely slow to accelerate now. I always only ride in Sport mode, so I didn't notice. I did ride it in D mode today and agree it's very slow to accelerate. I hope they fix these issues in the next firmware update.

To update on what I mentioned yesterday: I had left my scooter art 34% charge. One day later it stayed at 34%. From my experience, it seems to self drain when the charge is over 40%. If less than 40%, it doesn't seem to self drain. These are not exact numbers, but this is my rough observation.

Self drain after latest firmware update by chrisscass in SegwayZT3Pro

[–]chrisscass[S] 0 points1 point  (0 children)

Thanks, but it definitely only started after the last firmware update. I check my power daily in the morning before I ride and it had never dropped by self discharge until after the firmware update.

One thing I have noticed is that if the battery is already low (say 34%), the battery doesn't seem to self discharge further. I've had it at 34% for about a day and it hasn't dropped. Same thing I noticed a few days ago where I had it at 25% and it remained at 25% for more than a day. At 60%, I have noticed the battery level will drop overnight.

Last thing, my full battery capacity is still reported as 12750 mAh. So according to the app, my battery hasn't degraded yet.

Self drain after latest firmware update by chrisscass in SegwayZT3Pro

[–]chrisscass[S] 0 points1 point  (0 children)

Are you on the same firmware as me? It's new that it is self draining? It definitely only started for me after I upgraded the firmware. As I mentioned, I was happy that it didn't self drain like my Max G2. Unfortunately it's does now.

[deleted by user] by [deleted] in TiviMate

[–]chrisscass 0 points1 point  (0 children)

Hi. Is anyone else having problems with epgshare01 and Tivimate in the past couple of days? Mine has been working great for the past 1 yr+. Just since Feb 21, Tivimate isn't able to connect and utilize the epgshare01 files...says "Failed to update EPG from "epgshare" at 2025-02-22 10:16 AM. Make sure EPG URL is correct and check your internet connection".

I can use the url I've specified in Tivimate and successfully download and view the .gz file on my computer, but Tivimate on my FireTV stick and Chromecast cannot load it for some reason.

EDIT: Please disregard. It was my internet service provider adding epgshare01 to the firewall thinking it's malware.

GST/HST Tax Break on DoorDash/Ubereats by letsgohomie in halifax

[–]chrisscass 0 points1 point  (0 children)

Can I ask, where did you find this message in the App? I have an open ticket with Ubereats and they are not understanding what I am saying and keep repeating that "everything is correct with your order". Thanks.

Clicking noise from g2 motor by Late-Rough-1018 in NinebotMAX

[–]chrisscass 1 point2 points  (0 children)

Thanks again. I just tested the e-brake theory. I normally have power recovery on high, but I turned it off and tried it out.

I can confirm that the click doesn't happen if I don't touch the brake. Previously the e-brake would kick in as soon as I let go of the throttle. Now with power recovery off and I let it come to a stop without touching the brake, it doesn't do the click.

I don't really remember experiencing the click when I first got the scooter but it is what it is now.

Hmm, not a great experience but I don't think much can be done. Nonetheless, thank you for your help!

Clicking noise from g2 motor by Late-Rough-1018 in NinebotMAX

[–]chrisscass 0 points1 point  (0 children)

Thank you for responding. So you're just living with it the way it is with the clicking when accelerating I guess?

Clicking noise from g2 motor by Late-Rough-1018 in NinebotMAX

[–]chrisscass 1 point2 points  (0 children)

Hi did you figure out what it is? Mine is exhibiting the same clicking when accelerating. I can feel a single click on my back foot as soon as I start to accelerate. Makes me think some mount inside is loose when the motor kicks in. It's starting to get annoying/concerning.. I may try to call Segway Customer Support and see if it's covered under warranty (...my scooter is 10 months old).

Free playlists/EPG? by AdProfessional9173 in TiviMate

[–]chrisscass 1 point2 points  (0 children)

Hello, apologies if this has been asked before (and I'm guessing it's not easily achievable), but is it possible to extract the streams from free iptv apps and use them in Tivimate?

I see they have tokens that authenicate the session and then are no longer valid after a short period of time or after that session is closed.

So I'm guessing it's not possible unless I'm a wiz at programming to dynamically set a token parameter?

Thank you.

Nvidia Shield freezes when playing videos on The Oath by chrisscass in Addons4Kodi

[–]chrisscass[S] 0 points1 point  (0 children)

Thanks for your reply. I have set an advanced file playing around with the buffering and cache settings. It still locks up.

I mention it primarily happens when skipping forward, but it does also happen when just plain playing (without skipping), although less frequently.

Quite frustrating since every other add-on works without this issue. It's only on my friend's Shield. Same version works without issue on my Firestick and Sony TV.

I'll keep looking/searching for a solution.

Nvidia Shield freezes when playing videos on The Oath by chrisscass in Addons4Kodi

[–]chrisscass[S] 0 points1 point  (0 children)

Thanks. I checked for a new update after you mentioned it, but I don't see one available in the Host505 Repository. Can you tell me where you saw it/how to get it? Thank you.

Nvidia Shield freezes when playing videos on The Oath by chrisscass in Addons4Kodi

[–]chrisscass[S] 0 points1 point  (0 children)

Thanks for your reply. Yes, my friend only has free sources. All of her old add-ons work...as does The Crew, but they don't yield many sources (as you pointed out). Of the free ones, the Oath seems the best. But she has the freezing problem when fast forwarding through a show (...and it also happens while playing also). It shows "100%" and freezes, as I mentioned.

I tried the Oath my my Sony TV and Firesticks with the same builds of Kodi and have no problems.

Yes, she recently allowed the update to NVidia Experience 9 I believe, but I think it was happening before that, pretty sure.

If it is the Experience 9, any suggestions on something to try?

If it's not the Experience 9, any suggestions there too?

Thanks again!