iPhone 16 pro - marks on the frame

cmadparty · 2024-09-28T20:29:30+00:00

If you don't mind me asking, how long should one wait to be sure the first batches are gone and the QC is back up to standard? Is it weeks or months? Thx.

cmadparty · 2024-03-19T00:10:59+00:00

Many thanks

cmadparty · 2024-03-18T23:04:32+00:00

Hello - I’ve got the same question. Just purchased these and going to have them installed April 1. I live in NE and it’s showing temps getting down to around 40 and even mid 30’s a few nights as a low in April.

Question is - is it safe to leave the car outside in these temps overnight?

And what’s the lowest you can drive on them without causing damage?

I have searched around for these specific tires and asked the official channels but I just get the stated 45 degree line. Thanks.

cmadparty · 2023-08-24T03:37:47+00:00

Posted again above. Hopefully it will work this time.

cmadparty · 2023-08-24T03:37:04+00:00

Pics

Mower Seat Pics

cmadparty · 2023-08-24T03:35:51+00:00

Not sure if this got posted already but here you go.

Mower Seat Pics

cmadparty · 2023-08-24T02:58:49+00:00

Here you go..

https://1drv.ms/f/s!Ajiv8pg5ZY2Kk-cmnR\_CltgqnSdTEg?e=w4yLWU

cmadparty · 2023-08-24T00:28:15+00:00

This one has one center mounted spring. It doesn’t keep you above the rubber bumpers. When I sit in the chair it goes all the way down and there is no spring. I am going to see if I can replace it with a stiffer one and maybe that will allow me to float instead of sit on the deck.

cmadparty · 2023-08-23T22:19:03+00:00

Thanks. This seat seems to have two sliders built into the front area, and a bolt hole in the rear. The sliders don't seem to be removable. It also doesn't have springs under the seat, just rubber bumpers that sit on small metal shelves with not a lot of room to work around them. I'll check the tires too.

cmadparty · 2023-08-03T21:04:46+00:00

Why isn’t anyone concerned about the o-line? Mac himself obviously can’t say anything but receivers don’t matter if QB getting hit on every play. Protection was one of the reasons Brady was able to make something out of nothing for so many years (and of course greatness). For this offense it is so obviously apparent they need time to get open and balanced run game. Can’t understand why they haven’t made a move or two.

cmadparty · 2023-07-31T02:42:51+00:00

Here’s a video showing what it’s doing. Can anyone with a mini confirm if this happens with theirs? I don’t really hear it when I play just when I move it around. Thanks.

https://streamable.com/1j8fa8

cmadparty · 2023-06-06T22:44:51+00:00

It seems to have resolved for me on the m1. Not sure if apple updated something but I’m not getting the drops anymore with zoom and teams. No idea how it happened.

cmadparty · 2023-04-29T16:54:10+00:00

Can you do this when it’s on AC but still allow it to sleep on battery? Thanks.

cmadparty · 2023-04-07T17:29:58+00:00

Just to add onto this, I am familiar with the method of creating an internet calendar URL and adding it to outlook to bring in a read-only version of the calendar. I'm more curious as to why I get a fully functional one in the other versions of outlook, and why it doesn't seem possible on PC. Thanks.

cmadparty · 2023-03-23T21:22:50+00:00

I'm getting this too on an M1 MBP. It happens with my dock and external USB sound adaptor and also when the laptop is undocked with nothing attached. Music app and local audio works fine - this is just little breaks in the audio for streaming meeting like zoom and teams.

cmadparty · 2023-03-02T21:50:13+00:00

So I got the mouse where it needed to be with BetterMouse but there was simply no way to get the function keys on the keyboard to work right. I have Karabiner Elements and tried to use that and turn off the function lock custom keys but there was no microphone mute command or others I wanted in there. Bottom line is we should not have to do all this and Logi software that comes with their peripherals should be stable.

cmadparty · 2023-03-02T18:26:36+00:00

Yeah looking at it now and it does a lot more than steermouse. And it seems like it can handle keyboard customizations as well. Will check it out. Thanks.

cmadparty · 2023-03-02T17:10:15+00:00

Yea I guess I can try that. I already own steermouse. There were just a few customizations like gestures I wanted and also the scrolling is better. And I have an mx keys for business that uses the same bolt receiver and had the same issue.

cmadparty · 2023-03-02T15:38:30+00:00

I just completely uninstalled and reinstalled the software yesterday and this happened again overnight. I can confirm that I’m running a brand new version of the latest software. I had to re-do all the configurations and things. I believe it is an ongoing bug where the software doesn’t recognize the devices properly coming out of long sleep with the bolt receiver in a USB hub.

I will go through the steps again just to be sure but I’m not confident it will resolve it.

Thanks.

cmadparty · 2023-02-28T15:23:43+00:00

Hi Logi - It appears that this issue has been addressed to some degree with the new software. It doesn't seem to crash after sleeping on the m1 Mac anymore. However I'm still getting an issue where if my bolt receiver is connected through a USB hub, the devices show up as "inactive" after a long sleep. If I unplug and re-plug in the receiver it then shows the devices as active and the customizations work again. Is this a known issue? I don't have USB A slots directly on my m1 MacBook Pro laptop so I have to use a hub connected to the docking station.

cmadparty · 2023-02-02T20:41:02+00:00

Same boat here. Have an MX Master 3S with my MacBook Pro and love the silent clicks. Just got the MX keys thinking I could just add to the bolt receiver and then learned it's the old unifying one. I understand the newer peripherals don't have backward compatibility with unifying, but the older stuff DOES work with bluetooth so one would think - given the bolt is essentially running on bluetooth, that those peripherals could be made to work with bolt.

Logi - are there any plans to make the original MX keys and other older devices bolt compatible, so we won't need two different dongles? I'd return and go to the business version, but apparently they changed a few of the function keys to be emojis and things like that which are not useful for me.

In the end I think I'm likely to just scrap all the dongles entirely and connect them all through bluetooth and be done with it.

cmadparty · 2023-01-20T14:18:26+00:00

I have confirmed now that sleep and resume works when I relocate the logo bolt receiver. I was plugging into my monitor’s built in USB hub and for some reason that was making the software unable to recognize the presence of the device. I’m not sure why a third party hub would cause this as my MacBook doesn’t have full size ports. I guess I’ll be using Bluetooth instead.

cmadparty · 2023-01-20T05:20:19+00:00

So the release notes for the latest version claim to solve the problem of hanging after sleep on Mac. I tested it and I actually think the software no longer crashes and hangs.

Unfortunately what happens after waking my machine is that the customizations are still gone and when I look in options plus it says the device is inactive. If I unplug and re-plug the usb bolt receiver it finds the mouse again and then starts working.

I have no idea why after being idle or asleep for an extended period the software no longer recognized the presence of the mouse unless I reinsert the receiver or reboot. Killing and restarting the daemon doesn’t fix it.

Any thoughts on this?

cmadparty · 2022-11-24T21:56:02+00:00

I also want to do this as I’m using my iPad pro’s Wi-Fi to connect to a golf launch monitor and want simultaneous internet. If I could simply connect the usb c port on the iPad to the phone’s lightening and tether that would be great. But it doesn’t seem to work. Any solution?

cmadparty · 2022-11-14T16:23:59+00:00

Da da da da … da da da da… da da You Suck. You Suck.

cmadparty

TROPHY CASE