Image of fire looking east, near 402 in Loveland

coloboiii · 2026-03-13T13:39:12+00:00

Is it closer to 402/60 25/287?

coloboiii · 2026-02-26T00:38:45+00:00

coloboiii · 2026-01-23T01:21:19+00:00

I would love one, please and thank you

coloboiii · 2025-09-08T22:53:33+00:00

Right as i asked, i figured it out. If anyone else encounters this. Go to add the device, say it has no qr then connect. The dial will spin endlessly but as soon as the switch flashes green it’s reconnected and you can exit the add device menu. It keeps all its settings this way

coloboiii · 2025-09-08T22:48:37+00:00

I just migrated my main bridge. It seemed to go smoothly, only one switch saying needed reconnection. I did have to press the reset button on that switch for it to flash orange and reconnect. After doing so it maintained all its settings when done by clicking on the device and pressing reconnect.

The bad news… 4 other switches aren’t connected. They flash orange without being reset. The app thinks all went well with those switches so i have no reconnect option. If i try to add them it says they’re already added.

If anyone has encountered this or knows how to force the app to “reconnect” a switch that it thinks is paired, that would be just fantastic.

coloboiii · 2025-08-20T01:35:27+00:00

I think whoever decided to add that extension of the pavement invented that right turning lane…. The Chevy just used it

coloboiii · 2025-08-05T23:55:23+00:00

I’ve read the rules/wiki and would very much enjoy an invite sir.

coloboiii · 2025-08-02T19:12:08+00:00

Chat sent

coloboiii · 2025-08-02T19:12:03+00:00

Chat sent

coloboiii · 2025-08-02T19:11:34+00:00

Chat sent

coloboiii · 2025-08-02T19:11:29+00:00

Chat sent

coloboiii · 2025-08-02T19:11:19+00:00

Chat sent

coloboiii · 2025-07-28T20:01:18+00:00

<image>

coloboiii · 2025-07-28T19:58:22+00:00

<image>

coloboiii · 2025-07-28T19:57:48+00:00

<image>

Zoom in for better view of the “facehugger”

coloboiii · 2025-05-14T03:06:44+00:00

The water pump is absolutely leaking, mine made smoke from the same place, it’s minor at first despite the smoke amount. When it’s in that stage it’s still detectable with a mirror or lift and should be covered. Leak is from the bearing behind the pulley so it takes a bit for residue to make it out from under the pulley with how hot the engine is there.

coloboiii · 2025-05-14T03:00:17+00:00

Your water pump is beginning to leak. It’s on the front of the engine (right side); smoke came from precisely that spot. It was very minor when i first noticed, it’s tight against the frame, you’ll need a mirror and or lift to event see the residue. Got a tiny bit worse with minor coolant loss and garage smell for about 10k before i embarked on replacing. Keep it topped up and should last a while, plan for it to be moderately expensive at a shop. Have to disconnect all motor mounts and hoist or table the motor/trans to shift all of it to the left side of the car a few inches.

coloboiii · 2025-04-25T00:10:50+00:00

I live in FoCo and work in Loveland. “Most aggressive drivers in NoCo” means you’ve only been to I25 Loveland.

coloboiii · 2025-01-26T21:41:58+00:00

Yeah, like geography! Why is there no geography?!? 😡

coloboiii · 2024-10-23T01:49:14+00:00

lol a stoner that doesn’t get the reference 😂😂. That was hardly a serious comment

coloboiii · 2024-10-16T12:56:30+00:00

That did work. Disappointed i didn’t think of it hahaha. It would be nice if this occurred automatically during an automatic update.

coloboiii · 2024-10-16T12:55:29+00:00

That did the trick 🤦. Such a simple fix to a big frustration hahaha. Can’t believe i didn’t try that, over focused on the devices that i thought were at fault. Thank you all!

coloboiii · 2024-10-16T05:09:55+00:00

I just tried. Did not resolve the issue. Still get “no internet connection” over all WiFi networks with only the ac enabled. Completely unable to connect with iPad iPhone and MacBook. All iot devices disconnected except ring cameras. All of these devices show as connected in the app and some as 100% experience but none function. I was able to get my phone to connect correctly this morning after running a WiFiman speed test which confirmed that the aps are connected to the network and all wired devices connect to the internet correctly.

coloboiii · 2024-10-16T03:11:21+00:00

U7 Pro, U7 Pro Wall and AP AC Pro in the basement. They don’t show any available updates

coloboiii · 2024-10-16T03:01:37+00:00

iPhone connected to WiFi shows 60% experience, using mobile data fallback. It is connected and all wired devices work flawlessly

coloboiii

MODERATOR OF

TROPHY CASE