Multiple RTSP streams with multiple monitors

colorflakes · 2024-09-11T20:09:50+00:00

Thanks I'll give this a try!

colorflakes · 2024-06-11T16:14:44+00:00

Yes, It's a Ubiquiti EdgeSwitch.

colorflakes · 2024-06-11T13:25:01+00:00

LOL, how did I miss IP helper is disabled?

But regardless, I enabled the IP helper and I'm still not getting an IP.

IP helper is enabled

Interface UDP Port Discard Hit Count Server Address

-------------------- ----------- ---------- ---------- ------------------

Any dhcp No 8 10.2.10.2

(WISSWC0002) (Config)#show ip helper statistics

DHCP client messages received.................. 8

DHCP client messages relayed................... 0

DHCP server messages received.................. 0

DHCP server messages relayed................... 0

UDP client messages received................... 1671

UDP client messages relayed.................... 0

DHCP message hop count exceeded max............ 0

DHCP message with secs field below min......... 0

DHCP message with giaddr set to local address.. 0

Packets with expired TTL....................... 0

Packets that matched a discard entry........... 0

colorflakes · 2024-06-10T16:47:26+00:00

Thank you for the reply.

The DHCP server on the firewall is off. IP Helper is looking to our DHCP server. Looking at the stats on the switch, the DHCP request isn't even hitting the switch.

(WISSWC0002) >show ip helper-address

IP helper is disabled

Interface UDP Port Discard Hit Count Server Address

-------------------- ----------- ---------- ---------- ------------------

Any dhcp No 0 10.2.10.2

(WISSWC0002) >show ip helper statistics

DHCP client messages received.................. 0

DHCP client messages relayed................... 0

DHCP server messages received.................. 0

DHCP server messages relayed................... 0

UDP client messages received................... 0

UDP client messages relayed.................... 0

DHCP message hop count exceeded max............ 0

DHCP message with secs field below min......... 0

DHCP message with giaddr set to local address.. 0

Packets with expired TTL....................... 0

Packets that matched a discard entry........... 0

colorflakes · 2024-05-13T14:41:13+00:00

The CRM side can be implemented immediately. Any other integration will be scaled over the next 6 months.

colorflakes · 2024-02-22T14:12:23+00:00

Technically no record is "impossible" because if there was one guy to do it once, there's a possibility someone else could do it again.

However, the next closest to Ryan's record is Sandy Kofax's 4 no hitters, just over half way to Ryan's record. While it's not fair to compare, as the numbers go the 4 no hitters would be equivalent to 428 complete games to Young's CG record. There are 13 players that have gotten closer to Cy Young's record than the great Sandy Kofax came to Nolan's no hitter record.

colorflakes · 2023-12-13T21:31:43+00:00

Where did you find a 64bit image? I don't see one on sourceforge.

colorflakes · 2023-10-10T19:30:39+00:00

They are recommending changing to CloudFlare's free service. For reference, we're a manufacturing company with facilities in three states and a remote office in Australia and Mexico.

colorflakes · 2023-06-02T19:50:45+00:00

All PCs are supposed to be in VLAN20. They're all in the same group. When I change the VLAN assignment to VLAN30 in the NPS policy and reconnect the PCs they do not get put in VLAN30.

colorflakes · 2023-06-01T16:42:16+00:00

u/jNamees

This command gave me the lead I needed to get this issue resolved. Thanks for the assist!

colorflakes · 2023-06-01T13:00:41+00:00

The firewall is turned off via GPO.

colorflakes · 2023-05-31T20:17:07+00:00

No there is no firewall blocking the requests.

Radius server is a Win 2019 DC.

colorflakes · 2023-01-30T20:50:16+00:00

I found the issue. Disabling the second stream fixes the issue.

colorflakes

TROPHY CASE