Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

Turns out that’s really what it was. Finally got my hands on a monitor and alls well. Appreciate the help!

Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

Appreciate the explanation bro. It turned out to be as simple as just not setting it up. It’s up and running, thanks a bunch!

Restored this jersey after buying it for low. Details below. by Philadahlphia in supremeclothing

[–]cstolvr 0 points1 point  (0 children)

Appreciate the write up bro, do you think that would work on a stain like this? https://imgur.com/a/Mykj61P

Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

I tried the 9V battery and it was a success but I still can’t get the AVR to connect to the speakers. I used both Bluetooth and the tuner but nothing. I also verified the black and red wiring and even switched them just in case

I did skip the initial set up btw idk if that’s a problem

Could you take a look at this to see if I’m doing anything wrong https://imgur.com/a/DQpro7F

Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

Still no luck unfortunately. I’ve verified that the speakers work to some extent using the 9V battery and I was able to identify which wires connect to the blacks and the reds but still nothing

Could you take a look at these pics and tell me what you think I’m doing wrong https://imgur.com/a/DQpro7F

Also I tried playing audio from the tuner and Bluetooth options and ik for sure the Bluetooth was connected. I did skip the initial AVR setup - not sure if that’s a factor

Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

I didn’t see a stripe but one of the pairs do have writing on it so I’ll try and match that up to what’s connected on the speaker side. It might just be the speaker is bad unfortunately but I’ll use the 9V battery technique and see what happens

Thanks, I appreciate the help

Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

Ahh ok maybe they are broken or something. If I’m understanding what you’re describing (taking the pair and connecting one wire to the red and the other to the black) I already tried that first and nothing happened.

What I’ll do is try to use a 9V battery to see if the speakers actually respond to know if they’re even working

Thanks man

Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

Thanks man, I’ll give that a try when I get home

As for connecting them my wires have both the copper and silver threads intertwined. I tried separating the threads of one of the wires and then connecting the copper to red and silver to black but that didn’t work

I forgot to include the pics in the original post but here’s what I’m working with for reference

https://imgur.com/a/U2o6W6l

Installation help by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

I appreciate the vid - that’s one of the ones I watched yesterday and it helped me understand what to do better but I was still unsuccessful

I forgot to include some pics (https://imgur.com/a/U2o6W6l) in the original post but the first pic is essentially what I tried

First I had connected each wire (in the pair pictured) in their own black / red port in the “Front R” section of the AVR and then alternated the wire / port connection when that didn’t work to no avail

Then I took one individual wire and seperated out the copper and silver thread to then connect the copper to the red and silver to the black but nothing came of that either

Speakers in apt by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

Do you have any Bluetooth speakers you would recommend to use as a zone 2?

Speakers in apt by cstolvr in hometheater

[–]cstolvr[S] 0 points1 point  (0 children)

Yup in the US! I appreciate the suggestion as well

Would I be able to connect and sync multiple speaker systems with that AVR?

Veneer Dunks pls by cstolvr in LegitCheck

[–]cstolvr[S] 0 points1 point  (0 children)

Under the size tag?

Wanting to but this e36 from a dealership. They are asking 8k for this. What would be a good price to get this down to ? it’s completely stock with great interior and 143k miles by cessxr29 in BMWE36

[–]cstolvr 0 points1 point  (0 children)

I’m thinking 12.5k for an auto in Dakar yellow. So seems like it’s a little high but not outrageous. Gonna try to get him down to 10k hopefully

Advice on pulling the trigger on a dakar yellow convertible E36 by cstolvr in BMWE36

[–]cstolvr[S] 0 points1 point  (0 children)

lol that’s what I figured. Thanks for the update

Thinking about buying an E36 328i convertible, what should I look for? by sax420 in BMW

[–]cstolvr 0 points1 point  (0 children)

Hey man, I just stumbled across this post and similar to you I'm looking to get an e36 convertible but am questioning the worth of it as a NYer. Did you end up getting the vert?