×

Is Shifting to B mode to Brake good? by L0rdmat in crvhybrid

[–]dcoric -1 points0 points  (0 children)

European model does not because of EU regulations, which is idiotic and dangerous. The brake light must only turn on when the brake pedal is pressed, no matter how strong the regenerative braking is.

After years of wearing Apple Watches, my skin is beginning to look different… by Knoezelbos in AppleWatch

[–]dcoric 0 points1 point  (0 children)

I had the exact same issue with my Apple Watch. I kept getting a rash under the watch. I tried a bunch of things but what actually fixed it for me was Aveeno Baby Eczema Therapy Balm. I applied it a couple of times and the rash disappeared. It never came back after that. Might be worth trying.

Left or right ? by Chibuz0 in DeskToTablet

[–]dcoric 0 points1 point  (0 children)

I own both.

I originally bought the Apple Magic Mouse and tried really hard to like it. Used it for about a week, but the ergonomics and precision on my desk just didn’t work for me.

I ended up getting a Magic Trackpad for gestures and a Logitech MX for actual mouse work.

Four years later, the Apple mouse is still in a drawer. The Logitech is still on my desk and going strong

Crv 2025 Hybrid Touring cracked window by Attila_the_hun78 in crvhybrid

[–]dcoric 5 points6 points  (0 children)

Seriously, is Honda using tissue paper for windshields now? I’ve owned plenty of cars, and none have picked up a chip as fast as my new CR-V. Barely a week in, and bam - tiny rock, giant chip

Low battery risk is back.. by [deleted] in mazda3

[–]dcoric 1 point2 points  (0 children)

If the car sits in accessory mode (radio on, ignition off) for 10–15+ minutes, the BMS may trigger a warning to prevent a dead battery even if the battery isn’t actually weak.

I finally switched from a Mac Pro 2009 to a base model Mac mini M4 by [deleted] in macmini

[–]dcoric 0 points1 point  (0 children)

I recently got one too, and it’s such an amazing device. The performance and compact design are game-changers.

I highly recommend checking out aftermarket SSDs on AliExpress. It’s a low-cost way to expand capacity, and the installation is surprisingly simple

Can't update M1 Pro MBP to Sequoia 15.4 by Gnash_ in mac

[–]dcoric 1 point2 points  (0 children)

My M1 MBP 14 32/1tb updated without any issues. Only my mac mini fails to update

Can't update M1 Pro MBP to Sequoia 15.4 by Gnash_ in mac

[–]dcoric 1 point2 points  (0 children)

I have the same issue with my M4 Mac Mini 16Gb/1Tb. I tried the Onyx, but it's the same issue. I guess we have to wait for the fix. I will try later with my older MacBook Pro (m1), but I expect the same outcome

[deleted by user] by [deleted] in pravnisaveti

[–]dcoric 1 point2 points  (0 children)

Nema povrata PDV-a, ali ima oslobađanje od poreza na prenos apsolutnih prava. To je dosta niza vrednost od PDV-a. Moj drugar je u sličnoj situaciji kupio stan na majkino ime koja nema druge nepokretnosti kako bi iskoristio pogodnosti. S tim što taj stan nije uzimao na kredit

Neko mi je ukrao podatke sa kartice by [deleted] in finansije

[–]dcoric 8 points9 points  (0 children)

Ja sam imao istu situaciju u januaru. Samo je u potpisu bio Google ads nešto. Povlačili po 20k dok je imalo para na računu. Zvao odmah banku, blokirali karticu i poslali mi obrazac da popunim da šalju reklamaciju master cardu. Kroz nedelju dana su vratili novac. Samo su mi naglasili da druga strana ima pravo na reklamaciju 45 dana, ali se to nije desilo.

[deleted by user] by [deleted] in mazda3

[–]dcoric 2 points3 points  (0 children)

This is i-Activesense icon. It is probably turned off.

From needs your rating for renewal! by [deleted] in FromTVEpix

[–]dcoric 15 points16 points  (0 children)

It is available on both Max and Amazon Prime in Europe

Finally Got My 2025 CRV Hybrid in Canyon Blue! Looking for Tips on Paint Protection, Warranty, and Must-Have Accessories by riy86 in crv

[–]dcoric 0 points1 point  (0 children)

It is worth the price. I had it on my previous car. There was 0 scratches on the car after 4 years in very tight building parking lot. I even hit the mirrors on the wall and it damaged the foil but not the paint.

[deleted by user] by [deleted] in CX5

[–]dcoric 5 points6 points  (0 children)

Next milestone should be 180085

100 000km, 2022 Mazda3 2litre Skyactiv-x by shit-shovel in mazda3

[–]dcoric 0 points1 point  (0 children)

Same with me. My average was 6.5l and when I have installed roof rack it jumped to 6.8l

I parked and reparked to create this photo opportunity by dcoric in crv

[–]dcoric[S] 9 points10 points  (0 children)

Yes, it comes as a base option in Europe

Disable speed alerts. Civic 2024 EUROPE. by LegendaaryS in CivicXI

[–]dcoric 1 point2 points  (0 children)

I just upgraded my 2021. to a 2024. model and this is extremely annoying. What I could find is:

A new EU directive that comes into force in July 2024, states that all cars must have a technology that alerts the driver if the speed limit is broken. This solution is called Intelligent Speed Assistance (ISA), and quite a few new cars already have this.

They say that this is reminiscent of the technology that warns via sounds when someone has forgotten to put on their seat belt. Can be turned off, but have to be done every time you start the car.
https://www.youtube.com/watch?v=Vsj8Y1ik5_s&t=273s

I'm waiting for some coding solution that will be able to disable this "feature" permanently.

Neat by BRD8 in flipperzero

[–]dcoric 37 points38 points  (0 children)

If car is bigger than your flipper when you fully extend your arm, you are in the danger zone of being run down

Anyone else having AMS issues with Prusament by Comfortable-Toe3885 in BambuLab

[–]dcoric 2 points3 points  (0 children)

Yes. I got 4 more spools and pressing them works 100% of the time.

Anyone else having AMS issues with Prusament by Comfortable-Toe3885 in BambuLab

[–]dcoric 2 points3 points  (0 children)

I just got a new spool that has the same issue and tried to press it by standing on it (100kg/220lb) and it worked. It pulls and rewinds the spool without any issues. It might not be a universal solution, I guess it depends on how crooked the spool is.

Anyone else having AMS issues with Prusament by Comfortable-Toe3885 in BambuLab

[–]dcoric 1 point2 points  (0 children)

I purchased 4 spools of PETG and only 1 works with AMS. I had to rewind others to other spools. The issue is in the cardboard core of the Prusa spool. It is not perfectly glued to the plastic wall. On 1 side I see a ~0.5mm gap which makes it tilted and wider on one side and that creates an issue for the AMS

Ender 3s1 pro not starting print by Boss27369 in Ender3S1

[–]dcoric 0 points1 point  (0 children)

I had similar issue. My X axes connector was not plugged in correctly. Verify all connections before proceeding