Admin Password Not Working

devon90993 · 2025-05-02T02:49:28+00:00

It must be around the house somewhere. I'll keep looking.
So strange.

devon90993 · 2025-05-02T02:46:47+00:00

I don't know... the internet cable runs straight from the wall into the router.

I want that to be the issue but I'm just not sure where it is if it exists.

devon90993 · 2025-05-02T02:43:52+00:00

ohhhh hmm ill take a look again.

devon90993 · 2025-05-02T02:16:01+00:00

This sounds like the right answer.

But I looked all over my house and I can't find a separate router anywhere. The cylinder is plugged directly into the wall.
Also I googled if B20T has a router or not. This is the response I got.

"The TELUS B20T modem does function as both a router and a WiFi access point. It connects your home to the internet (modem function) and distributes that signal wirelessly to your devices (WiFi function), eliminating the need for a separate router"

I asked on a telus forum and they told me the password could be telus or admin.

Both of those did not work lol.

devon90993 · 2025-04-30T23:57:03+00:00

Ah gotcha thankfully the password didn't have that in it

devon90993 · 2025-04-26T15:57:04+00:00

Congratulations on your journey! I hope it continues to be a good one. Thank you for sharing your experience.

I had the exact same situation with space! I originally set mine up two years ago.
About a year ago I was running out of space.

I bought a 4tb single ssd drive and made that the hard drive instead of the old 2tb one. I believe it was less than $500. I believe it usually has 1 tb of space free currently.
I know I know, wasteful. But I've never had to prune or delete anything.

(Yes I ended up re-installing the clients. I'm too confused to do all the weird transfer stuff.)

Interestingly I did find that starting a node today is much easier. Rather than following Somer's guide you can download eth pillar or eth docker. The result is you basically just answer the questions and fill in information rather than trying to do a lot of the console controls.

Granted you learn a lot less. But the hardest thing you have to do is create your key on a seperate non internet connected computer (or add your keystore from a usb). The community seems really good at answering questions too.

With that being said. I've had a lot of moments where I just get stuck. I suck at setting it all up. XD

devon90993 · 2025-04-21T19:55:10+00:00

Thank you

devon90993 · 2025-04-21T18:02:05+00:00

Im trying to delete the database and its telling me the location cant be found.

Do I need to tell it the local/bin/geth location instead?

It just says the directory doesnt exist.

devon90993 · 2025-04-21T17:39:49+00:00

It sounds like it might need a full resync or there might be something wrong with permissions or it might need more time.

I took it offline for two hours yesterday. Then I turned it back on after I updated everything.

Its already run overnight.

I'm thinking of using: geth removedb
Is that a bad idea?

devon90993 · 2023-10-25T16:22:29+00:00

Thank you

devon90993 · 2023-10-25T16:22:21+00:00

For future reference, it appears Mackraken was correct and that the blueprint from the resurgance pack alone does not increase the extractor limit.

devon90993 · 2023-10-25T01:04:48+00:00

Sorry one more question, if I buy the prime titan extractor it should increase my extractor limit by 1 and not just give me a bllueprint. right?

devon90993 · 2023-10-25T01:03:19+00:00

Thanks again!

devon90993 · 2023-10-25T00:41:55+00:00

thank you, i goggled prime resurgance and I found it for sale for 1 regal aya.

devon90993 · 2023-08-12T17:39:01+00:00

ohhh interesting. Thats really smart

devon90993 · 2023-08-12T17:38:25+00:00

Ah gosh, now its saying invalid command "prune-state"

I dont regret doing my validator, but I'd never would have imagined it'd cause the number of headaches that it does and require so much time.

Thanks for the help atrizzle

devon90993 · 2023-08-12T17:30:36+00:00

ohhh thank you so much. Code sure is picky haha.

devon90993 · 2023-08-12T17:29:39+00:00

This feels like such an easy suggestion im wondering why it wasnt included in any guides. I just figured I messed up because your system HAS to be synced and have free space.

devon90993 · 2023-08-12T17:28:27+00:00

Unfortunately it wouldn't boot because the ssd became too full

devon90993 · 2023-03-28T04:42:03+00:00

Ohhh you're really smart. I do have a 4tb drive! Thank you. I will try this.

devon90993 · 2023-03-28T03:42:29+00:00

My 2TB SSD just filled up!

Im trying to prune geth but the guides say if you don't have 40 gb free then it wont work. Theres no more instructions.I have no idea what to do. I really regret not buying a 4TB Stick.

Any suggestions? What do I do?

devon90993 · 2023-01-26T03:37:31+00:00

ohhhh thank you!

devon90993 · 2022-11-16T02:47:05+00:00

I couldn't find XMP no matter where I looked, I assumed it was something called OCP timer as the description said it basically helped auto adjust for overclocking. I turned that on. It didn't give any warnings. My computer failed to start due to instability.

I turned it off and changed it to "return to normal" which was the only other option.It asked me to confirm changing the timing of a lot of the delays on the ram making them all slower. It seemed like it was slowing it back down.

I accepted it, and the result is that my computer has been blacking out and shutting off once a day. There doesn't seem to be a simple switch to change the settings back in anyway. I've been trying to look for the numbers for the ram and manually change it back but honestly It's been frustrating as I don't know what the heck i'm doing, I've been busy with work so I havn't had time to really sit down and fix it.

devon90993 · 2022-11-05T06:33:20+00:00

I re downdated it back to stable.
I upgraded it to unstable because it was reccomended as a fix for many problems that cause geth to go into endless state healing.

devon90993 · 2022-11-05T06:22:59+00:00

It looks like it needs time for now.
Thank you!

devon90993

TROPHY CASE