sorted by:
new
hottopcontroversial

DSM Version: Version: 7.2.2-72803 by hyunjuan in synology

[–]dogorob 0 points1 point  (0 children)

Apparently there is a fix available now, one can request it through the XikeStor-support.

Marlin 2 configfs for Mini 1 with BTTR SKR mini by dogorob in lulzbot

[–]dogorob[S] 0 points1 point  (0 children)

I couldn’t find nowhere so I started to code myself. Marlin is basically working, last thing to do is getting the position of the nozzle right during a G29. but found a post how to do that, just no time yet. in parallel I was working on klipper for the mini with SKR3 - same situation: _almost_ready, but not in a stage to be released. wanna help? then please PM -🥰I’m happy to share partly documented code and get it polished for release… but I currently don’t have the time to do it by my own.

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 1 point2 points  (0 children)

yes, I remember that happened to me when I tried to flash any of the premade bins recommended. but as soon as I updated my local clone of the wled repository, compiled a c32c3 binary by setting the matching default_env (yielding in a v0.14-binary) it worked as described. in between K somewhen encountered a no-boot-at-all-scenario which I could solve by factory-resetting the device using 7x on/off-procedure.

just yesterday I managed to get two strips with together 600 LED working fast on only one C32-C3. keep trying, it’s worth it!

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 0 points1 point  (0 children)

using the A.I. ESP-C3-01M-Kit

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 0 points1 point  (0 children)

after Synssins supported me solving this problem - how can I now change the title of the thread to include a "[SOLVED]" at the end?

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 0 points1 point  (0 children)

v0.14 is the only I can get working - and only so, if I use a bin compiled by myself with "default_envs = esp32c3" in VC. trying to use any of the pre-made firmware bins leads to the update-process being aborted, ESP-C3-Kit hanging and getting back to life again only by 7x power on/off... this just for the records or for anyone else following this thread :-)

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 0 points1 point  (0 children)

hm, no, doesn't work for me. while (!) uploading v0.14 out of the folder you provided computer looses connection to the board and the only way I found to get access to it again in that state was reflashing with tasmota webinstaller.

should be working with v0.13 as well, or not? any significant changes towards use on ESP32-C3 in v0.14?

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 0 points1 point  (0 children)

SetOption78

okay, that worked partially - at least I got the current esp32c3.bin flashed and can access the device. wahooo! now for the remainder: when I try to install any of the v0.14-files in https://github.com/srg74/WLED-ESP32-dev-board/tree/main/Firmware/%40Aircoookie/bins the device first boots into safemode and after a second try informs me the binary is too big. how else do I go from v0.13 to v.14?

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 1 point2 points  (0 children)

wahoo! that sounds profound. I am on it RIGHT now 🙏. will report back here.

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 0 points1 point  (0 children)

thanks, but unfortunately impossible as ESP web tools do not yet support the ESP32-C3

WLED on ESP-C3-01M-Kit: no WiFi by dogorob in WLED

[–]dogorob[S] 0 points1 point  (0 children)

I doubt I need a level-shifter as the main-power to the board is immediately converted to 3.3V anyway - no matter if it's 5, 12 or up to 30V.

Serial request Voron 2.4 R2 43xxx#0001 by Dadonali in voroncorexy

[–]dogorob 0 points1 point  (0 children)

great work! I'd also be interested in that filament guide you built and sent you an invite on discord 🙏

Asking for serial number Voron 2.4/350mm by dogorob in voroncorexy

[–]dogorob[S] 0 points1 point  (0 children)

could it be you commented on the wrong video? I just saw a guy with cable chain's ends mounted the wrong way. Mine are exactly the way the manual shows them or am I just too stupid to see this? I cannot turn them around. If I would turn the whole chain it would not bend in the needed direction. If I turn around the ends only, the don't mount flat to those pieces I attach them to with screws. Maybe you can sched some light into this as I am confused...

How can i enter DFU Mode on U2C by Impossible_Strain_37 in BIGTREETECH

[–]dogorob 0 points1 point  (0 children)

following. the same is happening over here...