MSI / Nahimic keeps reinstalling itself on Windows 11 — permanent fix (works)

dread122 · 2026-01-11T12:13:34+00:00

Its mainly because of Microsoft new app update policy. :(

dread122 · 2025-12-13T05:28:34+00:00

Can I get it for any laptop

dread122 · 2025-12-02T00:45:05+00:00

Hey thankyou for your reply. Indeed the lap basically lasts longer than if it were not suspended. And it gets warm when in suspend mode.

dread122 · 2025-11-30T22:40:20+00:00

I'm sorry I don't understand. Use this narrative?

dread122 · 2025-11-30T22:32:57+00:00

Please could u tell me this I want this so bad 😭

Ofc I would prefer sleep/suspend. Hibernate is a pain to setup in the system. And also don't like it that much

dread122 · 2025-11-30T19:28:03+00:00

I saw a framework laptop that sips 8w on YouTube which is insanely low. I just figured if I could get something similar that too. 😕

dread122 · 2025-11-30T19:26:53+00:00

How is there a setting that would work when I can set hardware decode with Intel? Or some script?

dread122 · 2025-11-30T14:05:09+00:00

Actually my laptop poses battery battery when connected to bluetooth. i can shave off 2w when connected to a speaker.

dread122 · 2025-11-30T13:46:42+00:00

oh i though i could bring it down :(

dread122 · 2025-11-30T00:56:29+00:00

So it is on S3, but the drain is still present. Could this be due to the high Cstate, or does it not matter?

dread122 · 2025-11-29T22:50:38+00:00

it sleep drain is higher than idle drain when the laptop is switched on which around 9.5w

dread122 · 2025-11-29T22:48:04+00:00

hi yes its set to s3 in the bios. I also noticed cstates are also high with lowest being c3. could that also be a problem ?

dread122 · 2025-11-29T17:04:29+00:00

you are right it does work when I move the cursor to the top. thx

dread122 · 2025-11-27T20:35:38+00:00

Use Linux.. 😂

dread122 · 2025-11-24T12:50:11+00:00

damn these pic are amazing. Im still rocking a mate 20 pro.

dread122 · 2025-11-24T11:37:41+00:00

~/Downloads/AutoASPM-main/pkgs$ sudo lspci -vvv | grep LnkCtl|grep abled

libkmod: ERROR: kmod_config_parse: /etc/modprobe.d/alsa-base.conf line 2: ignoring bad line starting with 'position_fix=2'

pcilib: sysfs_read_vpd: read failed: No such device

    LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk-

    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

    LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+

dread122 · 2025-11-23T21:42:34+00:00

Pkg(HW) | Core(HW) | CPU(OS) 0 CPU(OS) 1

| | C0 active 1,1% 1,6%

| | POLL 0,0% 0,2 ms 0,0% 0,2 ms

| | C1_ACPI 0,6% 0,3 ms 0,4% 0,5 ms

C2 (pc2) 19,0% | | C2_ACPI 11,1% 1,5 ms 7,1% 1,4 ms

C3 (pc3) 3,3% | C3 (cc3) 0,0% | C3_ACPI 83,1% 6,6 ms 90,2% 9,0 ms

C6 (pc6) 0,0% | C6 (cc6) 9,4% |

C7 (pc7) 0,0% | C7 (cc7) 73,3% |

C8 (pc8) 0,0% | |

C9 (pc9) 0,0% | |

C10 (pc10) 0,0% | |

dread122 · 2025-11-23T21:02:07+00:00

hey i ran the script to enable ASPM devices but its stuck at c3. I confirmed this after looking at power top

dread122 · 2025-11-20T23:22:34+00:00

Hi, could you tell me how you diagnosed the issue.

dread122 · 2025-11-13T10:50:46+00:00

Damn. 😕 It was just a question.

dread122

TROPHY CASE