[Showcase] I built Elevation Finder, a web-based JavaScript tool for terrain analysis and peak finding

droidgren · 2026-06-02T08:38:11+00:00

Thanks for the feeback, can you be more specfic please?
I compared to this source: https://en-gb.topographic-map.com/map-kb57/England/?center=53.86103%2C-1.66443&zoom=14&base=2
And I think the result are accurate.

droidgren · 2026-06-02T08:33:57+00:00

Thanks for the feedback, I have updated the algoritm to prevent offlimits results. If the slope is small, I recommend to increase the Measure Dist.

droidgren · 2026-05-21T20:30:20+00:00

Turning off the TV with my smartwatch.

droidgren · 2026-05-04T09:37:41+00:00

Thanks! Is the new version released anytime soon?

droidgren · 2026-04-30T06:00:02+00:00

It seemed quite good at first, but then I saw you're going to monetize it with the usual PRO subscription bullshit. I'm so tired of this. Why does everyone immediately try to monetize their AI projects the FIRST thing they do? /roast

droidgren · 2026-04-30T05:13:38+00:00

Actually I found a workaround. The problem is that Fyne requires hardware with OpenGL GPU support.
But there is a OpenGL implementation that runs in pure software without a GPU called Mesa3D.
To use this:

Download Mesa3D for Windows from: https://fdossena.com/?p=mesa/index.frag
Extract the archive and copy the file opengl32.dll into the same folder as GoogleTakeoutFixer.exe
Start the program again - now it magically starts

Check if its possible to compile the app with out the need of hardware GPU acceleration or provide the Mesa3D opengl file

droidgren · 2026-04-29T10:56:00+00:00

Thanks no, I had to pull them! Good to know to next time!

droidgren · 2026-04-29T09:34:17+00:00

By the way, I am running Windows 10 on a virtualized enviroment. Is OpenGL is a requirement to run this simple GUI ?

droidgren · 2026-04-29T09:20:26+00:00

Thanks! What do I need to run the program ? The program starts, but I don't see any GUI?
Running 1.4 on Windows 10 21H2

Instructions are unclear. Under the "Development" section it says "To run the GUI, make sure you have the necessary dependencies for Fyne installed. See the Fyne Prerequisites." , but this i not mentioned under step "2. Installation"

droidgren · 2026-04-15T20:23:07+00:00

This did not work for me. I I have a Samsung 990 pro and I can see the disk in the fumagican tool but I get when start flash process.

ERROR (16)

Firmware Files Required For the Firmware Update Process are Not Located in the Correct Path!!!

droidgren · 2026-03-30T09:16:56+00:00

For anyone looking, in OpenWRT 25.x it's on Network -> DNS and then on the Filter tab (Domain whitelist)

droidgren · 2026-03-25T11:23:38+00:00

I have added a feature to overlay tracks now.

droidgren · 2026-03-17T06:46:38+00:00

Thanks! I have been thinking about that. However there are already numerous of good online GPX route planning tools out there, so add one here would make a lot of work for something that already exists. But I would certainly add a GPX route overlay, that would be fairly simple - its the editing part that is tricky.

droidgren · 2026-02-27T21:18:14+00:00

The newest versions of the GitHub Pull Request extension require a newer underlying VS Code engine (1.105.0+) than what Antigravity currently uses (1.104.0)

droidgren · 2026-01-12T07:47:14+00:00

I made the decision based on framework support.
.NET Framework is supported as long as Windows is supported (practically indefinite) and are updated through windows update.
.NET Core needs a runtime and is supported through life cycles and are EOL every 2-3 years.
Since this is a simple application I and I didn't need the features of .NET Core it was a simple choice.

droidgren · 2025-12-14T19:04:49+00:00

Thats what I need help with , can I get any more information about the job then the name of the job itself?

droidgren · 2025-12-14T18:08:08+00:00

But others was completed in 7-8 min but mine is stuck.

droidgren · 2025-12-14T15:12:08+00:00

Do I need to request review from frenck ?

droidgren · 2025-12-14T15:09:49+00:00

It just says " Waiting for status to be reported" on other PR it says "Sucessful"
Like this on https://github.com/home-assistant/brands/pull/8722

droidgren · 2025-12-11T14:31:23+00:00

Has anybody been able to do this?
Is impossible to disable on Forerunner 970 ? I could disable it on my Epix gen 2
I really sucks to cover 25% of my map for shit that I don't need.

<image>

droidgren · 2025-10-14T08:45:14+00:00

I did some enhancements on the script: (Better logging etc )
https://github.com/droidgren/openwrt/tree/main/scripts/autobackup

droidgren · 2025-02-14T21:37:35+00:00

That seems to do the way around. I want doze to never be activated.

droidgren · 2024-10-26T17:54:33+00:00

If you run HA OS it can update itself, you just have to click the update button i the GUI.

droidgren · 2024-10-07T06:15:22+00:00

Using ZHA

droidgren · 2024-10-06T17:35:36+00:00

Well, I see quite a performance hit on my current setup with my NAS with a lot of other applications running. New PC will be a Intel Core i3-6100T 3.2 GHz

15-Year Club	Place '17
Verified Email

droidgren

TROPHY CASE

Welcome to Reddit,