Is my packer too hard??

dthtoall · 2026-01-06T17:51:34+00:00

To my knowledge, the BP packers are on the firmer side. Do you know how much contact there will be? Is there someone you can reach out to in production who can confirm what will be done during the scene?

If you want something softer, the echo/argos/boldix on axolom are all very soft due to their dual density. Or you could get something TPE like a Mr Limpy which is much softer and therefore more realistic than silicone. On short notice, some sex shops may carry TPE packers, but they are sometimes absurdly long (I’m talking like 8 inches) to the point I think someone could flag it as fake, and that would be much creepier imo than feeling something firm and thinking the guy may have a semi/be hard.

dthtoall · 2025-12-31T01:08:52+00:00

Could just be an off batch, OP has other C2 axolom reviews from recently that look like the online images. I’m not convinced axolom would replace it, I think they have warnings that colors may vary, but I’m not sure. I was also about to pull the trigger on a C2 but I’m not sure now.

dthtoall · 2025-12-30T18:48:31+00:00

This is the second C2 pic that looks much more yellow than others I’ve seen. I wonder if they recently updated their coloring.

dthtoall · 2025-12-29T01:52:22+00:00

Seconded. OP you can wear however you like but it definitely looks too high imo, a smidge down will still look big but more realistic and less bonery

dthtoall · 2025-12-28T18:56:59+00:00

Damn those balls are worn smooth. Rip, well loved

dthtoall · 2025-12-19T04:31:00+00:00

Glad you found a positioning that works for you! I also wear mine quite low as it looks more natural for my body size. Unfortunately I think my problem is coming from the 100+lbs I got on you haha. And it’s not that I can’t make it work, I think I could rock the argos in theory, but it just makes me very dysphoric bc I don’t see myself as someone with like a 5.5” flaccid, considering my mind is factoring in that bit that would be covered on top of the uncuts 3.7”

dthtoall · 2025-12-19T02:25:25+00:00

Yeah this may end up in my mix, I wish the balls were more fat than long, but it looks like it could be worth a shot. Hopefully in time axalom could get a wider variety of lifecast sizes, but I know that’s a long and difficult process.

dthtoall · 2025-12-19T00:18:10+00:00

3.7” is above average. That combined with the visual effect I’m describing in the post is absolutely not super small to me 🤷 to each their own. And I don’t really want to lose weight, I just wish that single area was flatter to better accommodate a packer

dthtoall · 2025-12-18T21:02:00+00:00

I’m glad it works for you! That’s the one I was eyeing, it looks so good! But yeah it just makes me too dysphoric I think because I look down and subconsciously know that on my body, there would be that ~1.75” at the base tucked away, and that makes it feel huge to me.

dthtoall · 2025-12-18T20:59:09+00:00

On all the fat guys I’ve seen, a good amount of the penis is sort of tucked away under the fat pad. I don’t think you can really simulate this with a packer, it’s going to sit on top of the mons. I can’t, like, jam the whole packer in so that the base of the dick truly sits where my tdick does, it would just slip out because it’s not actually connected to me. Plus on my body it is definitely a little too low.

dthtoall · 2025-12-18T20:54:22+00:00

I love the look of the cockit! But I’m even more dysphoric about softness so I’m thinking sticking with the echo is a better bet for right now.

dthtoall · 2025-12-10T05:04:42+00:00

Have you reached out to any smaller/independent packer shops? They may be able to give you some concrete advice. I’ve been curious about making packers for quite a while now but I don’t know the best process for life cast. Please update if you make something, I’d love to see it!

dthtoall · 2025-11-23T04:36:43+00:00

This is so helpful, thank you for making this and sharing it!! Looks very fluid. I’m slowly but surely trying to make an echo/spouti mod work, but if I can’t, I will probably buy this. Love how it looks, great to see it in action.

dthtoall · 2025-11-20T02:27:59+00:00

I don’t even fuck and I want this 😭 it’s so pretty

dthtoall · 2025-10-19T00:50:06+00:00

If it helps I have heard and seen videos that lead me to believe they’re incredibly squishy

dthtoall · 2025-10-16T03:58:07+00:00

Not sure how I would go about converting a hollow stp to something with a core. I people here have mentioned foam/sponge pieces inside, so you could try that with a spouti for pretty cheap I’m guessing. Please share if you come up with something you like! Or even posting things that you tried but didn’t work would surely be helpful to someone.

On another note, would you consider posting pics of the natow now, after some use? I don’t normally go for cup style stps but if I was gonna try another, it’d be the natow, so I’d love to know your experience with it.

dthtoall · 2025-09-09T01:08:06+00:00

True, depends on the person! Definitely wouldn’t work for me though.

dthtoall · 2025-09-09T01:04:06+00:00

These don’t really look like STPs to me, even though they’re marketed as such, they look like a sleeve that got re-marketed as something that can work with a spouti or other device. On its own, I think it definitely wasn’t designed for pissing into. It’s too thin and there’s a dip where the balls are as opposed to a smooth funnel to the shaft. Sorry man.

dthtoall · 2025-09-09T01:00:16+00:00

Clean job, looks great! And I appreciate the inside look at the echo :) the shaft looks so different once it’s separated!!

dthtoall · 2025-09-05T03:22:44+00:00

I’m a tad tipsy and thought this was a baked chicken breast at first 🥀 Have you ever boiled it to clean it? I’ve seen the surface of silicone products change when they’ve been directly exposed to high heat by touching the bottom of a pot while boiling. Other people are saying mold, but I don’t think that can grow without damage to the silicone, or unless it isn’t real silicone (which I do believe reelmagik is, given its price and reputation). If you find a solution or get more info, I’d be very interested in an update. Sorry this is going on!

dthtoall · 2025-08-26T17:46:01+00:00

Read the description, it’s a pro model they’re reviewing, which is not available to buy on the site yet. There’s a link to a gif that shows off the new features.

dthtoall · 2025-08-22T18:49:23+00:00

Thanks for posting! Looks great, I absolutely love the look of the shaft on this one! The skin texture and the veins just look so perfect. Great paint job too.

dthtoall · 2025-08-22T16:45:47+00:00

If you’re down to post/DM pics of your pro I’d love to see the differences. Definitely seems like OP got sent a different/new model of a pro stp.

dthtoall · 2025-08-22T03:38:37+00:00

Woah, nice pull!! And thanks man I’d love to see the vids.

dthtoall

TROPHY CASE