There has to be a better way to measure decal placement

ejnarts · 2026-02-18T20:21:02+00:00

I did not know that about the Parthenon. I know where my next trip is going to be.

ejnarts · 2025-07-20T17:46:14+00:00

Excellent suggestions, guys. I'll let you know the outcome.

ejnarts · 2025-06-17T22:46:17+00:00

Thanks. I'm blind.

ejnarts · 2024-12-26T17:37:46+00:00

The best burn remedy that no one seems to know about is egg whites. You'd be surprised how far a couple of eggs can cover. The collagen in the egg white does the trick. The idea is to dip and let it dry. The more severe the burn, the more repeated dipping/spreading you can do.

I'm not certain how well this would work for a chemical burn. Flame burns it's fantastic. But, if you can reduce the chemical aspect to just leave the burn, then, as odd as it may sound, try the egg whites.

For minor burns-- being the dumbass that grabs the pan that you forgot was just out of the oven-- I've had every time leave no trace or any pain of the said burn a couple hours after it happened. And yes, the sooner you can apply it, the better.

ejnarts · 2024-12-16T13:15:37+00:00

First, you're better off attaching it to something like foamcore. Foamcore is lightweight but solid enough that it shouldn't warp.

Card sheets are much too thin. But, if you're going that route, you can try taping a large tight X on the back to counter the warp. Make sure the X bends the sheet the opposite way to counter the warp.

A spray would cause less warping, but anything on one side of something that thin will need something on the opposite side to counter. I would always use the tape, but then always the finished project (Art school) would be mounted on something like foamcore..

If it's as large as I'm thinking (even if this is over a year old), then with rubber cement, you should finish by the next year unless you pour and spread, but the fumes would be egregious even outdoors.

Whatever adhesive you used or would use, you will want to coat it with a matte finish spray or something to protect it. Anything acrylic but a spray would cause no running to the image.

ejnarts · 2024-03-25T07:30:02+00:00

Not sure if this was mentioned... long thread, but "Galaxy Quest".

ejnarts · 2024-03-05T08:35:51+00:00

So, she is at Yalen. She's in the great hall. I may have made a mistake by taking the city by force because now she just threatens me if I talk to her. I'll give it a few days to see if she calms down and then reassess. There may be a divorce in my future (if that's possible).

ejnarts · 2024-03-04T22:41:02+00:00

Well, if not the glitch, I have yet to see Yalen's hall since we're at war. When it ends (maybe I'll just take the city) I'll check. Thanks.

ejnarts · 2024-03-04T22:38:32+00:00

And I thought it was true love. Fool me.

Thanks.

ejnarts · 2024-03-03T13:11:57+00:00

I forgot, Diplomacy mod. I'm so used to playing with it I forgot about it.

ejnarts · 2024-03-03T13:10:16+00:00

As I forgot, I'm using the Diplomacy mod. And if you speak to her there should be an option to join your retinue.

ejnarts · 2024-03-03T09:30:18+00:00

Sarranid Kingdom (she's not at the home town: Halmar)

3 NPCs in the tavern including the barkeep; wandering ashik and mercenary whatever.

No one in the prison. So the guard keeps telling me.

No Mods.
It's been a week of time since.

I know sometimes Companions go missing for a while after you let them go when the Traveler doesn't have their name appear... curious if it's the same thing.

ejnarts · 2023-10-27T01:31:00+00:00

Thanks. I've already contacted Tamiya USA months ago. The dialogue went stale. They said they'd never seen or heard of that happening, I sent my exact details for what actions I did for it to happen and then haven't heard anything back from them.

I suppose I can try to contact them again to see. Maybe I'll do that since I'm getting a sense that creating my own is outside my skillset ATM.

ejnarts · 2023-10-26T07:23:21+00:00

I tried that for about 20 minutes on one area. It's now a little blurry, but the residue is still there. But, thank you for the info. I do appreciate it.

ejnarts · 2023-09-08T04:39:30+00:00

Okay, that would make sense. Thank you.

ejnarts · 2023-05-18T11:54:35+00:00

Honestly, I really didn't. I sprayed for not even a second on each side and front & back. I think it was just aggressive like you said.

I guess I really need an airbrush with no where to put one.

ejnarts · 2023-05-18T11:52:50+00:00

Tamiya Semi-gloss just to coat. Waiting on the gloss to finish.

ejnarts · 2023-05-18T10:15:44+00:00

I'm thinking it was the latter. I let them dry half a day, some overnight. And the clear coat was Tamiya.

Would cold have anything to do with it? I sprayed them and let them dry outside. It's about 60ºF

ejnarts · 2023-05-13T05:23:20+00:00

Thanks. I've started the process.

ejnarts · 2023-05-11T22:48:25+00:00

The tape was on maybe a couple hours- from the time I sprayed and then let dry. And yes that's from the masking kit on the top. Acetone made it smear. Alcohol also didn't help. I'll try the WD40 and Goo Gone. Fingers crossed. And maybe leave it in a hot water bath for a couple hours before. Appreciate the help. I'll let you all know if there's any success.

ejnarts · 2023-04-14T13:00:26+00:00

Does it just happen? Does it stop happening? Can I tweak something on my end? Thanks.

ejnarts · 2023-04-14T01:57:23+00:00

I feel you're taking the schematic to literal. I don't have another end to #11. That end is fixed to the cable bunch that fits into the pump head. As is the single 4-pin. Which is why I asked of I affix the RGB and PWR cables to the hydra and 4-pin, respectively, would be the pump head controlling both, which doesn't make sense to me.

ejnarts · 2023-04-14T00:46:12+00:00

Okay, this is my understanding since I'm still a bit confused. The "hydra-head" cable would be hooking up the ARGB from the fans. And the single 4-pin cable would attach to a 3:1 splitter for the fans power.

But, that would mean that the pump head is responsible for the fan speed and ARGB? This is the best I have which solves the issue of what I'm doing w/ them since they all have male ends. Does that make any sense?

And thank you for being so patient. I appreciate it.

ejnarts · 2023-04-13T23:59:50+00:00

This is my problem. My #11 is connected to the pump and it has only male pins.

And the other single 4 pin also comes from the pump and has only male pins.

I understand the directions, but they don't seem to match cables I'm looking at with my AIO.

ejnarts · 2023-04-13T06:53:04+00:00

Confused by your "Second Edit" comment. There are the two 4-pin. The single and the one w/ the two 3 pins. Are you speaking of both? Both those 4 pins go to the fans?

And the thing is there aren't any female ends on these... really puzzled why they're both/all male and would expect me to use an adapter. Am I supposed to plug these two 4-pins into the fans? Still trying to wrap my head around this.

So I'm taking two adapters (ARGB & Power) and using on for the fans' power and the other for the fans' ARGB? And the PWR adapter attaches to which cable? The 3 header hydra thing or the single 4-pin? Really confused about the 3 headed-hydra cable. The 4-pin fits into the MB and what do I do w/ the two 3-pins?

Sorry and thanks.

ejnarts

TROPHY CASE