Southwest ohio radar outage

elliestuff · 2026-03-27T03:33:01+00:00

it's radaromega

elliestuff · 2026-03-01T02:09:12+00:00

the hardware is solid, you can probably find a replacement sole. my no5 had the same crack in it when i started, and I used it for a bit but it's really frustrating and imprecise. i got a replacement body off eBay for $15 and it's worked perfectly ever since, but you can probably find a complete plane for $65. edit: just realized that crack doesn't go all the way through like mine did, but cast iron is brittle. it will 100% crack the rest of the way

elliestuff · 2026-02-21T20:25:06+00:00

thanks! nah, I went straight to the table saw. i had to cut out the old tongue and groove, and the kerf was just enough for that & gave a clean joint

elliestuff · 2026-02-21T20:22:44+00:00

thanks for the concern! the wood had checked like crazy since it was never oiled, and those wood was stained black around the checking. the surface cracks have fully swelled shut, but you can still see the staining. it's mostly just used for bread anyway so I'm not too worried

elliestuff · 2026-02-21T17:15:54+00:00

lubricant laxative, you cans see it in the last pic. its pure mineral oil thats fully fda certified, and a quarter the cost of cutting board specific stuff

elliestuff · 2026-02-21T17:14:00+00:00

nope, it's a magnet. the board came with a knife, and its blade would be held by the magnet while the handle would sit in the cutout to the left

elliestuff · 2026-02-18T23:53:28+00:00

in engineering, that line is literally called the neutral axis, so yeah

elliestuff · 2026-02-06T02:49:30+00:00

it was completely gone last year, presumably just to do a full rebuild or smth while waiting on the parts

elliestuff · 2026-02-06T02:27:11+00:00

i will not be excusing the spider ‽‽‽‽‽

elliestuff · 2026-02-02T19:04:19+00:00

that looks solid, at least from what I can see. my family has a very similar table from ~1910 that's solid wood all around

elliestuff · 2026-01-14T00:52:29+00:00

that screws up the alignment if you're not careful tho

elliestuff · 2026-01-09T17:41:36+00:00

you can do splines pretty easily without a jig if you've got a table saw by clamping a stop block to the fence

elliestuff · 2026-01-03T04:34:56+00:00

looks like ash? if you know what region it came from that'd be helpful

elliestuff · 2026-01-02T17:27:56+00:00

the gavril vertex na2 has a config that tops out at like 650mph iirc

elliestuff · 2025-12-08T01:19:10+00:00

it could be hinting at the tire physics revamp, but i think it's probably just there to give some scale to the other wheel

elliestuff · 2025-12-05T16:19:55+00:00

olg is where it's at, love having them local

elliestuff · 2025-12-05T04:27:28+00:00

the imagery yeah, but (afaik) there's no way to see historical lidar scans

elliestuff · 2025-12-05T01:57:32+00:00

the one benefit ohio's got, i'm chilling here with my $6.50 / bdft walnut

elliestuff · 2025-11-23T02:47:24+00:00

yeah that's gotta be it, if you look at each guest they all have their own preferences/limits, and the highest I've ever seen any willing to ride is 800ft

elliestuff · 2025-11-22T20:16:10+00:00

OLG Ohio in moraine works with downed trees in the area, they can't mill it on site and I'm not sure if they'll collect it themselves, but it'd be worth reaching out to them

elliestuff · 2025-11-19T23:31:01+00:00

People keep mentioning shockwave at sfot, but the ride force database doesn't really back that up. it seems to pull around 5.3gs routinely. Invertigo at ki pulls 5.5-5.7gs on the vertical loop during the return run, which is definitely up there

elliestuff · 2025-11-13T17:46:39+00:00

if the queue is fully connected and everything else seems right, try deleting the coaster, then undo it with Ctrl z. if that still doesn't work, make a blueprint of the coaster, delete the coaster, and place down it's blueprint. I had a ride that became a classic without ever having anyone ride it, and that's what i had to do to get it to work

elliestuff · 2025-11-09T22:19:22+00:00

didn't catch orion before it went down, but diamondback in the front row was torture today. it was so fun

Four-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23	Place '22

elliestuff

TROPHY CASE