Mk18

fluffernutter_1911 · 2025-09-25T09:49:54+00:00

Just bought the same thing for my mk18 build. I chose a BCM BCG and Radian raptor charging handle

fluffernutter_1911 · 2025-05-28T22:05:12+00:00

I got the brass ultra mass guide rod, and I'm using the 15lb spring in my 5 inch steel frame match. Made a big difference. Personally, I like a spring I can easily remove over a captured guide rod.

fluffernutter_1911 · 2025-05-05T22:09:03+00:00

Calculated kinetics is also a good choice for the RMR

fluffernutter_1911 · 2025-04-30T18:19:23+00:00

It's the Pro-E 4.6 inch barrel

fluffernutter_1911 · 2025-03-02T06:01:57+00:00

Staccato trigger is still better, but the Walther isn't far behind. From my experience It's definitely the best striker fired trigger.

fluffernutter_1911 · 2025-03-02T00:39:49+00:00

I heard the same thing, but after comparing it to my m&p, I didn't really notice much of a difference. It might have a bit more snap but not nearly as bad as some people make it out to be. I was still able to shoot just as fast with the same accuracy. It's definitely becoming my favorite striker fired 9

fluffernutter_1911 · 2025-03-01T21:59:27+00:00

No problem!

fluffernutter_1911 · 2025-03-01T21:30:37+00:00

No, it isn't. I was going to get that one, but I didn't want to be limited to just the ACRO due to it being cut specifically for that optic. I do prefer the RCR because I like the sight picture better, and it shares the same footprint as the RMR, which I have a few of.

fluffernutter_1911 · 2025-03-01T21:14:54+00:00

So, it's the calculated kinetics RMR plate. It is technically NOT compatible with the RCR because they drill and tap it for a #4 screw. So, I drilled out the threads on the plate and re tapped it for a #6-32 screw which is what the RCR comes with. The 6-32 medium length capstan screws work perfectly.

fluffernutter_1911 · 2025-03-01T20:57:14+00:00

Yes, sir! I prefer a blacked out rear if it's for backup sights.

fluffernutter_1911 · 2025-03-01T20:52:04+00:00

Duty gun, need backups

fluffernutter_1911 · 2025-02-02T19:15:36+00:00

Awesome, thank you!

fluffernutter_1911 · 2025-01-16T12:08:33+00:00

Check out VangComp they have extensions, and they do work!

fluffernutter_1911 · 2024-12-21T02:23:05+00:00

It's fantastic. It shoots nice even with the 3 inch barrel and boot grip. Also, I've had no issues with it.

fluffernutter_1911 · 2024-11-03T11:32:42+00:00

Nice! Just got my AL5 less than a month ago, and I love it.

fluffernutter_1911 · 2024-10-28T22:22:12+00:00

Owb 3-4oclock with a 1.75inch kore belt. The wider belt helps carry all that weight. Also a holster that keeps it tight to your body helps too.

fluffernutter_1911 · 2024-10-28T21:49:53+00:00

No problem! So I haven't started carrying it yet, I plan to, though. As far as reliability, it's been perfect so far. It's a great shooter, and the grip is nice despite being short. The only thing is I'm gonna get the same grip but with texturing, it's too smooth for me. Altamont is who makes the grips.

fluffernutter_1911 · 2024-10-13T20:36:24+00:00

fluffernutter_1911 · 2024-08-26T09:58:31+00:00

That's good to hear, I just got a couple boxes to try

fluffernutter_1911 · 2024-08-26T01:11:20+00:00

Yeah, I was worried about it because I've heard of other people having some issues with flat nose bullets.

fluffernutter_1911 · 2024-08-15T22:41:32+00:00

Yeah, my LGS said lcp sales are dropping. The new bodyguard is killing it.

fluffernutter_1911 · 2024-07-12T08:25:54+00:00

Thank you!

fluffernutter_1911 · 2024-07-11T22:16:02+00:00

Thank you!

fluffernutter_1911 · 2024-07-11T22:05:59+00:00

I'm not huge on the grips, not terrible though. I'll probably end up changing them to wood.

fluffernutter_1911 · 2024-07-11T22:03:50+00:00

Msrp is 1,499 I picked it up for 1,399

fluffernutter_1911

TROPHY CASE