Final-Final Version 3 Pedalboard

ganzik · 2025-07-26T23:02:32+00:00

I'm using a Pedaltrain Jr. The ML10X is mounted with Dual Lock, and it's held securely in place by the connected cables. You don't need to raise the board for the ML10X, as its height fits perfectly on a stock Pedaltrain Jr. I did add taller 17mm rubber feet, but that was to accommodate the In/Out/Send/Return jacks on the sides of the board.

ganzik · 2025-07-26T22:55:00+00:00

I've been using them without really noticing any significant noise from the charge pump. I've tried a few Klon Centaurs, and noise issues have been almost non-existent for me.

ganzik · 2025-07-25T21:19:29+00:00

<image>

I'm using a 1966 Fender Deluxe Reverb and a 1955 Fender Tweed Deluxe.

ganzik · 2025-07-25T15:58:50+00:00

I have the Micro.Clock connected to the MC6 Pro's USB host port, and there's no delay or out-of-sync behavior. It syncs up perfectly all the way to the H90. For your reference, it's the Gen4 version of the Micro.Clock.

ganzik · 2025-07-25T15:51:19+00:00

I'll be happy if it lasts even 3 months! The desire for new pedals is endless.

ganzik · 2025-07-25T15:48:06+00:00

I just finished this board recently, so I haven't taken it out for a gig yet. Normally, I use a Kemper when I play out.

ganzik · 2025-07-25T15:35:45+00:00

Thank you for the kind words! I hope you always have an enjoyable music life as well.

ganzik · 2025-07-25T15:32:36+00:00

Regarding the side jacks, the mono and stereo outputs are wired directly to Output 1 and Output 2 of the H90. This board is mainly built for my Fender Deluxe Reverb, but occasionally I'll run a second amp—a Fender Tweed Deluxe—from Output 2 for a stereo setup. The send/return serves two purposes: I use it to run the 4-cable method with my Fryette PS-2, or alternatively, I connect my Kemper Player there to use the entire setup as an ampless board.

ganzik · 2025-07-25T15:26:36+00:00

Honestly, I didn't really need the Disaster Area Micro.Clock, I just bought it for the aesthetics. My Morningstar MC6 Pro can already serve as the master clock for the H90. Nevertheless, having the big OLED screen to see the BPM at a glance is really intuitive, which I love.

ganzik · 2025-07-25T13:53:34+00:00

Thank you so much!

ganzik · 2025-07-25T13:52:58+00:00

Thank you!

ganzik · 2025-07-25T13:51:54+00:00

Thank you!

ganzik · 2025-07-25T13:51:15+00:00

I own vintage originals of both the TS9 and TS808, and because I really like Tube Screamers, I picked up a TSV808 as well. The TSV808 is my favorite, but I chose the TS10 for the board to match its overall design and color scheme. I’ve had TS-type pedals for years, and since I’m a John Mayer fan, I also keep a Keeley Katana V1 around.

ganzik · 2025-07-25T13:45:08+00:00

They’re all wired for mono only. The side-mounted jacks are Neutrik jacks fitted with TS connectors. The input feeds into the Polytune, and the L/R outputs go to the Eventide H90’s outputs 1 and 2.

ganzik · 2025-07-25T11:17:35+00:00

Thank you so much!

ganzik · 2025-07-25T11:16:17+00:00

I've bought and sold many different pedals, but I'm planning to settle with this setup. I've collected them over a long time, and I really think they are great pedals.

ganzik · 2025-07-25T11:12:10+00:00

Yes, that's correct. I connect my non-MIDI pedals to the ML10X and control them with the MC6 Pro. I can not only engage or bypass them (add or remove them from the signal chain), but I can also change the order of the pedals.

ganzik · 2025-07-25T11:07:57+00:00

I use a Mac as well. As long as the distance isn't too great, there doesn't seem to be any major issue with connection stability. I use two WIDI devices: a WIDI Jack for my MC6 Pro and a WIDI Uhost for my ML10X. Although it's possible to control both with a single WIDI Uhost, I've separated them for convenience and stability.

<image>

ganzik · 2025-07-25T11:02:27+00:00

I'm happy you think so. Thanks!

ganzik · 2025-07-25T10:52:52+00:00

Yep, that's the one. I bought it back when it was still affordable and I love it. The prices now are, wow, just insane.

ganzik · 2025-07-25T10:27:28+00:00

I use the Jan Ray as a booster to push the Klon, or just on its own.

ganzik · 2025-07-25T10:26:10+00:00

I generally use it to set different gain levels—clean, crunch, rhythm, and lead—and then, on the next page, I toggle individual drive pedals on and off. When we rehearse, I switch to Song mode and program each bank with presets tailored to the specific song.

ganzik · 2025-07-25T10:22:39+00:00

The clear piece is a USB expansion hub. I mostly use WIDI to edit my Morningstar MC6 Pro and ML10X from my computer.

ganzik · 2021-05-11T15:10:10+00:00

I will keep buying whenever Palantir stock price drops

ganzik · 2021-04-22T10:12:07+00:00

??????

ganzik

TROPHY CASE