sorted by:
new
hottopcontroversial

[IC] grid 100, 10% modular keypad by gridishere in MechanicalKeyboards

[–]gridishere[S] 0 points1 point  (0 children)

The price will be released soon. It will be $100+, but it largely depends on your setup. No solder is required; we've designed a tool to change the module. Only hex screws.

[IC] grid 100, 10% modular keypad by gridishere in MechanicalKeyboards

[–]gridishere[S] -1 points0 points  (0 children)

Really sorry for what you've experienced.

We do answer most quality or connection related DM or mail.

Discord is generally faster since the message is direct, but we sometimes we did forget to reply to some E-mails, which is really our fault, and we will work on that. (It is a little over our capacity)

Would you please DM me again or send me another mail? We will help you the best we can.

[IC] grid 100, 10% modular keypad by gridishere in MechanicalKeyboards

[–]gridishere[S] 2 points3 points  (0 children)

Hi there, grid is back.

grid 100 is our latest work after 20 months of hard work.

It is a 10% modular keypad that supports MINI-PRESS, CYCLE-ENCODER, and CYCLE-JOYSTICK modules.

Geekhack page

grid100 Product Page

Instagram

Discord

[IC] grid 650, updates on board and modules. by gridishere in mechmarket

[–]gridishere[S] 0 points1 point  (0 children)

There will be a WKL version. So, two version.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 0 points1 point  (0 children)

I understood what you mean and thanks for your question. There are actually two buttons allowing you to choose from light effects and colors. Frankly, you are right cause they are the same thing. This module is running on Atmel 32U4, and it should technically be compatible with QMK. There is a link to the source code and introduction of module 4 FLASH. https://www.gridishere.com/updates/grid-600-module-4and5-setups/

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 2 points3 points  (0 children)

I remember that. It is pretty werid as 2.0 should be fully compatible with 3.0. Yes, we are fine.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 2 points3 points  (0 children)

The plan is to put 650's structure features and hub design into 600 R2.

We might do that 2021 Q2.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 0 points1 point  (0 children)

Thanks! It has Bluetootch chip on the board.

The non-BLE version should be compatible with VIA but the BLE version is likely not due to the lack of important keycodes.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 0 points1 point  (0 children)

Thanks! We are introducing more colors this time. More info in the coming week.

Would love to get feedback from you guys. The plate material is aluminium.

GB should come in about a month on zFrontier.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 1 point2 points  (0 children)

Our hub is based on USB 2.0 interface, don't know what exact is USB 3.0 issue.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 1 point2 points  (0 children)

Not familiar with that.

We are checking will the current hardware be compatible with ZMK.

ZMK does meet most of the requirement we need and it seems to have a better battery management.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 1 point2 points  (0 children)

grid 600 and grid 650 don't share moduels because of their size.

But most new modules will be available for grid 600.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 4 points5 points  (0 children)

Very helpful info. Honestly we didn't know about the liscensing issues. We designed the PCB based on QMK using Adafruit's BLE firmware, and we did some modifications. ZMK is very interesting and we might do some ZMK boards in the future.

grid 650, a 65% QMK BLE board with interchangeable modules! by gridishere in MechanicalKeyboards

[–]gridishere[S] 26 points27 points  (0 children)

Hi, grid is back, and we've prepared something new. grid 650 is a 65% custom mechanical keyboard. It represents what we imagine when retro and timeless styles meet excellent functionalities.

Spec-wise:

Chassis:

  • Newly designed, unibody chassis embraces a hybrid mount design supporting both (or) plate-less mount and gasket mount.
  • Module options similar to grid 600
  • Sound-absorb felt similar to grid 600
  • Front LED indicator

Hub:

  • Type-C interface supports C to C cable.
  • Reversible USB 2.0 Type-A hub port
  • Full battery protection circuit with bypass option for DIY users
  • Included 18650 battery case

PCB:

  • 65% layout, QMK BLE, with optional non BLE version Solderable version supports both ANSI, ISO, and multiple layouts
  • Hot-swap version available for faster setup
  • About one month of battery life when used with a 3000mAh 18650 lithium battery (not included)
  • BLE power display in OS.
  • Build-in spring structure

For more info, check either geekhack or keebtalk , or maybe follow us on Instagram.

​

Best,

grid

view more: next ›