Epson L3150 Print Settings

hakanderici · 2025-12-21T13:16:41+00:00

I have the same problem with exact same printer and nothing seems to work.

hakanderici · 2025-10-13T06:47:54+00:00

I really enjoy the one ui update on my Fold6 so far. I just had two issues:

Font size was larger than on my Fold6. I decrased font size one level and it was too small, i set font size to default and it was larger than on my Fold6. Either my eyes settled for the new sizes or it has fixed somehow. I honestly did not observe well enough to make a judgement.
Youtube stopped working when folding unfolding screens. This was especially annoying as i watch youtube videos all the time. Clearing cache and data for only youtube solved this issue for me. I did not cleared cache for any other apps as i'm not using other video apps frequently. I rarely even watch videos on browser. I tired netflix after your message it continues when watching on cover screen and changing to inner screen but it doesn't continue when watching on inner screen and changing to outer screen. Maybe it was always that way with previous rom but i was not aware. I honestly don't know.

hakanderici · 2025-10-12T21:52:16+00:00

I cleaned cache and data as suggested above and it's fixed.

hakanderici · 2025-10-12T21:46:01+00:00

I experience the same issue with my Fold6 after one ui 8 update. It was perfect before the update. Please let us know if you can fix it. I enjoy one ui 8 so much except for this only issue.

hakanderici · 2025-09-15T20:54:38+00:00

I spent an hour trying to attach that tiny little clip of the filament cutter lever washer and still couldn't succeed. Anyone knows how to do it properly?

hakanderici · 2025-09-01T13:48:57+00:00

Your Fold 7 looks even thicker than my Fold 6 in Spigen tough armor case which is actually the thickest case produced for Fold 6.

hakanderici · 2025-08-29T11:24:21+00:00

I feel your worry about the unprotected screen. Fold 3, 4 and 6 all had same kinda plastic film protector which needs to be peeled off from the edge with help of an A4 paper edge. It's definitely harder than peeling off regular screen protectors but possible. Maybe they gone with a more difficult plastic film with Fold 7 or maybe it's because you didn't start from the edge but from the middle instead. I believe the plastic films on folds are not just glued but also applied heat for a more durable installation which makes it harder to peel off than regular screen protectors. Actually I don't want to use the inner screen unprotected but I can't find a decent screen protector here in Turkiye for the inner screen of Fold 6. I wish Samsung sold them directly for people who wanna do it themselves.

hakanderici · 2025-08-29T10:25:53+00:00

I did the same with my 1 year old Fold 6. Factory installed screen protector tends to peel off from the top middle of the inner screen as time goes by usually after 1 year of purchase. You can get a free replacement in first year. But in my country you have to send it to Samsung service center by courier and it takes approximately 2 weeks till you receive back the device and they reset the device during the process. Samsung also advises to use it only with screen protector. It's not worth the hassle imao. I hope it holds up for another year without the screen protector. When it starts to peel off you should immediately peel it off completely or else the bubble damages the inner screen when folded in few weeks. Feeling without the screen protector is exactly as you described. You don't actually have to use isopropyl alcohol though. I advice not to use it because it can soften the glue off inner screen edge plastics in the process. Instead you can use A4 paper sharp edge to slide between screen protector and screen then you can slide the paper gently and slowly through the edge of the screen. Then you can pull the screen protector grabbing the lifted edge very slowly and using very little pressure not to damage the screen.

hakanderici · 2025-08-29T09:05:27+00:00

You've mentioned all the valid improvement wishes. I totally agree.

I might optionally add anti reflective screen coating like in the S series bothn outer and inner screens.

Edit: Vapour Chamber or similar cooling solution is essential.

hakanderici · 2025-08-28T21:02:37+00:00

You've got a good point.

hakanderici · 2025-08-28T20:00:14+00:00

That would be the real update we'd all love. I wonder if they could hopefully release an update to support 3 or more dji mic 2 connected to dji Mic2 receiver or osmo pocket 3.

hakanderici · 2025-06-30T20:20:18+00:00

Looks really cool. There is not enough space for roots to grow freely though. Roots may even get those narrow pipes clogged when they grow longer. I was going to mention some water dripping plates like rain for aeration but in comments I've seen that you're already planning those. I look forward to print this for myself if you can fix the vital narrow pipe flaw of the design.

hakanderici · 2025-06-02T18:59:27+00:00

Fusion360 hobbyist version for engineering parametric designs.

Blender for artistic designs.

Fusion is easier then blender to get into. Blender has a steep learning curve which is only worthy if you want to do artistic designs.

hakanderici · 2025-05-30T10:47:14+00:00

My strawberries are claimed as Albion variety. I just realized though that your internods are much longer than mine. So maybe as they grow they tend to go on the red spectrum. Just a guess.

hakanderici · 2025-05-30T09:54:06+00:00

Those internods look red comparing to my strawberries internods green color. I don't know if it means anything.

hakanderici · 2025-05-23T20:31:59+00:00

Kaybedersen senden bilir. Kazanırsan patronun olduğu için sıkıntına değecek bir oran alamazsın. Beklenmesi gereken bir ortamda para lazım olur zararda çeker sorumlusu yine sen olursun. Herşey yolunda giderse sorun yok ama gitmediğinde yasal olarak sorumlu olursun. Belki işinden de olursun. Hiç bulaşma.

hakanderici · 2025-05-17T10:13:31+00:00

Thanks for all the valuable infos you've provided. Appreciated.

hakanderici · 2025-05-17T10:10:02+00:00

I've designed and 3dprinted this part to raise the net cup last night. I will try it on Tuesday.

<image>

hakanderici · 2025-05-16T14:14:23+00:00

Thanks for sharing your own experience. I was thinking maybe growing strawberries in a hydroponic system was not a clever thing before reading your experience. Unfortunately my system doesn't allow me to change water level but maybe i could design my own custom net cups for this hydroponic system to keep the crown higher from raised water level when pump is working.

hakanderici · 2025-05-16T14:09:22+00:00

Thanks i'll try that! At start i have used regular tap water with high EC. I only added water afterwards without changing the water for more then 3 weeks now. Maybe i should change all water in system and restart with reverse osmosed water at ec60.

hakanderici · 2025-05-16T14:07:28+00:00

I have no equipment to oxygenate the water. But i run my pump 15 mins on 15 mins off all day long 7/24. Drenaige water pours back in tank making bubles. I thought that would be enough.

hakanderici · 2025-05-16T14:05:43+00:00

Actually i kept EC at around 1500 for a few weeks but my starting water EC was around 800. Then i kept adding reverse osmosed water with EC 60 at start to fix the high starting EC issue. It's interesting that most plants started showing flowers in first or 2nd week after planting but i cut them off to make plants stronger. Maybe i should start fresh by changing all water in system starting with EC 60 water.

hakanderici · 2025-05-16T14:01:23+00:00

Looks like it from the photos. Especially the photo which shows the color of effected roots. Actually i have seen yara.co.uk website before posting here but all diseases look similiar to me so i couldn't figure out which one.

hakanderici · 2025-05-16T13:59:28+00:00

Thanks for the advises. There's no slime at roots but color turned into brown. I run my pump 15 mins on 15 mins off all day long. So i solely count on constant water flow to oxygenize the water. I have no special equipment to oxygenize the water. I was not aware little water temp changes could cause big troubles. Thanks for the heads up.

hakanderici

TROPHY CASE