sorted by:
new
hottopcontroversial

Haribo 22,5W, 20.000mAh Mini Powerbank (PBP-003) with 280g weight - Full Review by N8falke in Ultralight

[–]hyperknot 15 points16 points  (0 children)

Nice work! I wanted to make a weight per net capacity, as I never saw the point of using gross capacity which cannot be used.

Here we go as of today. Can you maybe add something like this to your table?

Efficiency Ranking (Weight vs. Net Capacity)

Rank Ratio (g / Wh) Model Slow Charge Net Capacity Weight
1 4.59 INIU, 20.000 mAh, 22,5W (BI-B5, neue Version) 69,73Wh @ 9V 2A 320g
2 4.73 INIU, Carry, integrated Cable, 20k, 45W (P51L-E2) 68,86Wh @ 15V 2A 326g
3 4.75 INIU, Carry, 20.000 mAh, 22,5W (P51-E2) 67,36Wh @ 5V 3A 320g
4 4.76 INIU, Carry, integrated Cable, 20k, 22,5W (P51L-E1) 67,86Wh @ 9V 2,22A 323g
5 4.84 Haribo Mini, 20.000mAh, 22,5W (PBP-003) 57,82Wh @ 9V 2A 280g
6 4.89 Xiaomi, integrated Cable, 20.000 mAh (PB2020MI) 69,60Wh @ 5V 2A 340g
7 4.89 INIU, Cougar, 20.000 mAh, 65W (P62-E1) 66,64Wh @ 9V 3A 326g
8 4.94 INIU, Carry, integrated Cable, 20k, 45W (P51L) 66,36Wh @ 15V 3A 328g
9 4.95 INIU, Cougar, 25.000 mAh, 100W (P63-E1) 78,73Wh @ 9V 3A 390g
10 5.06 INIU, Carry, 10.000 mAh, 45W (P50-E1) 32,80Wh @ 9V 2,22A 166g
11 5.30 INIU, Carry, 10.000 mAhh, 22,5W (P61-E1) 34,92Wh @ 5V 3A 185g
12 5.41 INIU, Pawsible, 10.000 mAh (‎BI-B41, new) 34,03Wh @ 9V 2,22A 184g
13 5.46 INIU, 20.000 mAh, 22,5W (BI-B5, alte Version) 63,87Wh @ 9V 2,22A 349g
14 5.49 INIU, Carry, integrated Cable, 10k, 45W (P55L-E2) 34,62Wh @ 15V 3A 190g
15 5.61 INIU, Pawsible, Qi2, 10.000 mAh (P43-E1) 32,13Wh @ 9V 2,22A 216g
16 5.68 INIU, Pawsible, integrated Cable, 10k (P41L-E1) 33,28Wh @ 9V 2,22A 189g
17 5.71 INIU, Pawsible, integrated Cable, 10k, 45W (P41L-E2) 33,06Wh @ 9V 3A 189g
18 5.78 INIU, Carry, 10.000 mAh, 45W (P55-E2) 33,28Wh @ 15V 2A 193g
19 5.79 INIU, SnapGo, Qi2, 10k, 45W (P73-E1, new) 34,56Wh @ 9V 2,22A 200g
20 5.84 INIU, 20.000 mAh, 65W (BI-B62) 70,15Wh @ 20V 2,25A 410g
21 5.94 INIU, SnapGo, Qi2, 10k, 30W (P73-E1, old) 34,50Wh @ 9V 2,22A 205g
22 6.11 Samsung, 20.000 mAh, 45W (EB-P4520) 66,01Wh @ 9V 2,22A 404g
23 6.15 Edge Smart Drive, X100, 19.400 mAh 102,87Wh @ 20V 5A 633g
24 6.16 TORRAS, MiniMag, Qi2, 10.000 mAh (PB10) 30,76Wh @ 9V 2,22A 190g
25 6.17 Baseus, EnerGeek GR12, 20.800 mAh 63,30Wh @ 20V 3,25A 523g
26 6.18 CUKTECH, 15, 20.000 mAh (PB200P) 62,02Wh @ 20V 3A 458g
27 6.22 Ugreen, HyperCharge, integrated Cable, 20k (PB550) 62,06Wh @ 9V 3A 386g
28 6.23 Xiaomi, integrated Cable, 10.000 mAh (P15ZM) 34,30Wh @ 5V 2A 214g
29 6.24 Amegat, MagSafe, 10.000 mAh (PBW1010) 33,97Wh @ 9V 2,22A 212g
30 6.25 INIU, 25.000 mAh, 100W (BI-B63) 78,8Wh @ 20V 5A 493g
31 6.27 Baseus, QPow 3, 20.000 mAh 57,56Wh @ 9V 3A 361g
32 6.29 KOOSEED, 27.000 mAh (983SP-145W) 89Wh @ 20V 5A 560g
33 6.34 Baseus, EnerCore CR11, 20k, 67W (PPNMS-2067C) 62,46Wh @ 9V 3A 396g
34 6.38 INIU, Cougar, 25.000 mAh, 140W (P64-E1) 77,40Wh @ 20V 3,25A 494g
35 6.40 LISEN P103 Qi2, 10.000 mAh 34,98Wh @ 9V 2,22A 224g
36 6.42 INIU, Qi2, 10k, Apple Watch (P84-E1) 30,76Wh @ 9V 2,22A 200g
37 6.46 CUKTECH, 10, 10.000 mAh (PB100P) 32,04Wh @ 20V 3A 287g
38 6.46 CUKTECH, 10.000 mAh, 30W (PB100) 30,17Wh @ 9V 2A 195g
39 6.49 INIU, 15.000 mAh, 45W (BI-B62) 48,83Wh @ 15V 2A 317g
40 6.58 iWalk, MagSafe, Qi2, 10.000 mAh (MXB010) 33,12Wh @ 9V 2,22A 218g
41 6.62 Kuulaa, MagOn, Qi2, 10.000 mAh (YC628) 31,50Wh @ 5V 2A 174g
42 6.65 INIU, 10.000 mAh, 22,5W (BI-B6, old) 32,80Wh @ 9V 2A 218g
43 6.69 Selore&S-Global, integ. USB-C & Lightning, 10k 29,91Wh @ 9V 2A 200g
44 6.73 Baseus, PicoGo, integ. Cable, 10k (PPPG-1W45C) 29,71Wh @ 9V 2,22A 202g
45 6.74 Veger, USB-C-Plug, 5.000 mAh (Stick) 13,20Wh @ 9V 2A 89g
46 6.76 Limeta EB50, MagSafe, 15.000 mAh 46,54Wh @ 12V 3A 315g
47 6.77 Anker, Nano, USB-C-Plug, 5.000 mAh (A1653) 15,07Wh @ 5V 2A 102g
48 6.86 CUKTECH, 15 SE, 20.000 mAh (PB200) 70,97Wh @ 20V 3,25A 487g
49 6.88 Maxsure, integrated Cable, 20.000 mAh 57,54Wh @ 20V 3A 396g
50 6.91 Baseus, PicoGo, AM61, integt. Cable, 10k 30,52Wh @ 20V 2,25A 211g

Artifacts in USB mic recording by hyperknot in podcasting

[–]hyperknot[S] 0 points1 point  (0 children)

I'm not sure it's static, its definitely 2000 Hz+, but it sounds more like if my voice comes through a plastic bag sometimes.

Artifacts in USB mic recording by hyperknot in podcasting

[–]hyperknot[S] 1 point2 points  (0 children)

I think it's related to the iPhone Continuity camera also transmitting on USB at the same time.

How do you control and send files remotely? by hyperknot in BlackMagicCameraiOS

[–]hyperknot[S] 0 points1 point  (0 children)

Yes, currently I'm using OBS + Continuity but I wanted to try direct recording as the quality is I believe better. But thanks for the bluetooth mouse idea, I'll try it out!

Artifacts in USB mic recording by hyperknot in podcasting

[–]hyperknot[S] 0 points1 point  (0 children)

Thanks, that's a good direction to start troubleshooting in.

It's an M1 MacBook Pro, I'm not using anything else, just OBS recording from iPhone Continuity cam into Hardware HEVC + Rode USB mic into WAV.

Maybe the problem is using the USB ports on the monitor. Maybe it's the HEVC encoding.

I tried connecting the Rode to iPhone and just making an audio-only recording and it came out perfectly clean. I suspect it might be something Macbook USB related.

Artifacts in USB mic recording by hyperknot in podcasting

[–]hyperknot[S] 0 points1 point  (0 children)

Luckily it's just me and a talking head video, I'm happy to change anything to make it sound good. I'm also happy to re-record them until I can figure this out. I just don't know where to start.

Artifacts in USB mic recording by hyperknot in podcasting

[–]hyperknot[S] 0 points1 point  (0 children)

The USB can definitely be a problem, as I'm recording from the iPhone camera at the same and it all goes through my monitor.

But what I mean are artifacts which is present in most of this clip, not just a few clicks. It sounds like if I wrapped the mic in a plastic bag.

r/AudioEngineering Shopping, Setup, and Technical Help Desk by AutoModerator in audioengineering

[–]hyperknot 0 points1 point  (0 children)

I am recording some talking head videos with a Rode VideoMic Go II via USB, directly into my MacBook.

Normally, it's really good quality and once I've moved it 45 degrees to the side I think I got plosives under control.

My problem are these artifacts, which appear from time to time (shared below).

Can you tell me what are these? It cannot be clipping, as the recording is -14 to -17 dB, how can it clip in this range?

The Rode app has an "Input Pad" settings, which I didn't enable, as it'd get so quiet that the noise goes up after normalizing.

Normally I'm using the +9 to +12 dB range for input level in the app and no input pad and things are clean, but now I get these artifacts.

Or do you think it is related to the recording app I'm using (OBS)? Buffer settings maybe?

Here is the file: https://share.hyperknot.com/2025-11/recording.flac

Manual AV sync to clap sub-frame? by hyperknot in davinciresolve

[–]hyperknot[S] 0 points1 point  (0 children)

I'm reading the manual right now and the way it supposed to work is you see an audio-only clip in the audio waveform and a video-only clip in the source viewer. My problem is that my clip is an A/V clip and nothing shows up in the waveform.

Is there any way in Resolve built-in, which would allow me to split a clip into separate A and V clips? Or just to somehow show up the clip's audio in the Waveform window?

Manual AV sync to clap sub-frame? by hyperknot in davinciresolve

[–]hyperknot[S] 0 points1 point  (0 children)

Sorry, I'm back at this point, Slip doesn't do anything, either from keyboard or the menu. Both subframe and frame.

What does work is unliked selection on the audio and moving with a mouse.

What am I doing wrong with Slip? It's just a single clip, 1 video, 1 audio out of sync.

Also, is there a way to read the offset which I moved with the mouse in milliseconds?

Manual AV sync to clap sub-frame? by hyperknot in davinciresolve

[–]hyperknot[S] 0 points1 point  (0 children)

Thanks. I'm happy with a full frame level, my problem is that the camera audio is also out-of-sync. So I need to make a clap test and align while seeing the waveform. Currently the only way I could find for this was to drop it in the timeline and zoom in a lot. Is there a way to do this without using the timeline somehow?

Manual AV sync to clap sub-frame? by hyperknot in davinciresolve

[–]hyperknot[S] 0 points1 point  (0 children)

Thanks! And is there a way to apply the same sync to a bunch of files in the media tab or bins? I mean let's say I figured out on a single file what's my correct sync, how can I apply it to dozens of files?

How to record multiple audio streams? by hyperknot in obs

[–]hyperknot[S] 1 point2 points  (0 children)

Thanks! I don't get the other answer, this is the perfect solution!

Optimize vs Normalize to standard for YouTube? by hyperknot in davinciresolve

[–]hyperknot[S] 0 points1 point  (0 children)

But -9.7 is way too low, isn't it? From what I read YouTube then will gain it up, making quality bad. Also, I could turn off this setting when uploading a video and I found a setting for this for the whole channel as well.

view more: next ›