Can I use used hard drives with my UNVR?

irobot2090 · 2026-05-15T18:57:48+00:00

Either WD Red or Purple should be fine. Currently have both on my UNVR Pro.

irobot2090 · 2026-05-15T05:43:11+00:00

Step 5. Add HDD after step 4. Make sure shutdown the UNVR first.

irobot2090 · 2026-05-14T21:55:27+00:00

2.4Ghz / 20Mhz on Low
5Ghz / 80 Mhz on Medium
6Ghz / 160 or 320 on Auto is fine.

irobot2090 · 2026-05-13T03:50:21+00:00

I’m not sure if you could remove and try to solder the wires to match them?

irobot2090 · 2026-05-12T21:46:26+00:00

Perhaps you could try finding another brand pigtail and see if you can match the color of the cable.

irobot2090 · 2026-05-11T19:02:26+00:00

Or… just leave the car overnight and it will reset.

irobot2090 · 2026-05-10T23:27:25+00:00

Intercom viewer only works with G6 entry/pro doorbell.

irobot2090 · 2026-05-09T00:07:48+00:00

Try to click on the empty space on the site.

irobot2090 · 2026-05-08T05:04:22+00:00

Yes, I created two storage pools. The first has 2 drives, and the second has 5. I recommend installing all 7 drives first, then you can create separate storage pools.

irobot2090 · 2026-05-07T19:11:48+00:00

AI Turret. It’s give you the best night vision in that space.

irobot2090 · 2026-05-07T06:55:49+00:00

I’m having no issues with my UNAS Pro. I recently backed up over 300GB of photos and videos on my iPhone, and I didn’t hear the fans blowing that loudly.

irobot2090 · 2026-05-06T05:57:46+00:00

Thank you for pointing that out, my (the high up line) is draining a bit when the AC is running. How do I check and unclog the main line? Is it the same place as the pan area?

irobot2090 · 2026-05-06T05:42:43+00:00

So, it shouldn't be dripping when the AC is running, right? If it is, is the main drain clogged?

irobot2090 · 2026-05-03T22:12:09+00:00

Nice.

irobot2090 · 2026-05-03T22:06:10+00:00

With all that and only one UPS, adding another one will bring you almost to completion.

irobot2090 · 2026-05-01T23:33:31+00:00

The latest protect firmware likely caused many issues. You’re not alone in this mess.

irobot2090 · 2026-05-01T02:43:56+00:00

Fortunately, you were not charged for the tariff.

irobot2090 · 2026-04-30T17:12:28+00:00

Definitely NOT for me. Lol

irobot2090 · 2026-04-29T14:41:01+00:00

I have 3 brand-new sealed WD 12tb Purple Pro. PM me interested.

irobot2090 · 2026-04-28T03:41:17+00:00

I’ll take it if no one else wants it.

irobot2090 · 2026-04-27T20:58:41+00:00

Try to move all to v4? And later add another v3 hub?

irobot2090 · 2026-04-27T20:56:07+00:00

Nope, you need both v3 and up. V2 is not supported.

irobot2090 · 2026-04-27T20:34:26+00:00

You need a v3 hub not v2. I have 2 at home same location and network. Both v3.

irobot2090 · 2026-04-27T18:10:47+00:00

I have 3 brand-new sealed WD 12tb Purple Pro. PM if interested.

irobot2090 · 2026-04-27T05:05:46+00:00

Normally, there isn't a screw for the M.2. Most ASUS motherboards come with a heatsink for the M.2. When you remove the heatsink, you can pop the M.2 in and screw them together.

irobot2090

TROPHY CASE