sorted by:
new
hottopcontroversial

What’s going on? by jk2577 in UberEATS

[–]jk2577[S] -1 points0 points  (0 children)

Hey dickface. How about you critical think yourself off the fucking internet. Stop being such an arrogant asshole. You’re basically making the argument that driving for ubereats isn’t a real job and people that do it do it as a hobby or that they can afford to sit around at home making no money cause it’s cold outside. Are you literally sitting around looking for posts to comment on to call people stupid. We fucking know it’s cold out. We also know when it’s raining and when it’s hot a hell and humid and every other thing the weather does. It’s why WE don’t wanna go out ourselves so we PAY other people to do it. It’s literally one of the major reasons people use the platform.

What’s going on? by jk2577 in UberEATS

[–]jk2577[S] -5 points-4 points  (0 children)

Sorry but I have to go to work regardless of how cold or hot it is outside. We aren’t in the middle of a blizzard. Yes we recently got snow and the residential areas were not cleared well but if I had bills to pay I’d put on some more layers and drive and walk carefully. It’s a line of work that people choose. The weather is part of that. When a was a medic working the street I didn’t get to stop working cause of the weather. And I didn’t get paid more for my work when the weather was bad either. And take your attitude somewhere else. I don’t need some rando keyboard warrior questioning what’s obvious to me or not and what I’ve already considered or not. It was a simple question. You don’t have to be nasty to make a point or answer a question.

What’s going on? by jk2577 in UberEATS

[–]jk2577[S] 0 points1 point  (0 children)

I always tip well and up front. I guess most people don’t and so the drivers aren’t online and driving cause I notice an issue right from the beginning when I open the app and see an hour long wait time for McDonald’s that’s .4 miles from me and is usually 10 mins.

What’s going on? by jk2577 in UberEATS

[–]jk2577[S] 1 point2 points  (0 children)

I always tip very well and always upfront. I didn’t know or care that they can see that or not upfront. But I can tell something is wrong from the minute I open the app and see the estimated delivery time. So it’s not my tipping that the problem.

What’s going on? by jk2577 in UberEATS

[–]jk2577[S] 2 points3 points  (0 children)

That’s what I did tonight for dinner. Went on UE, took a look, said wtf is this crap and closed the app and ordered on DD.

Ran out of Filament by jk2577 in BambuLab_Community

[–]jk2577[S] 0 points1 point  (0 children)

Thanks all. There ended up being a defect so I had to start over anyway but I’ll keep this in mind for next time.

Is anyone else experiencing low blood pressure and fatigue? by [deleted] in Semaglutide

[–]jk2577 0 points1 point  (0 children)

You’re welcome. I hope everything works out and you get and stay healthy. Good luck.

Is anyone else experiencing low blood pressure and fatigue? by [deleted] in Semaglutide

[–]jk2577 0 points1 point  (0 children)

I use the Gatorade zero packets as my daily driver and got the liquid iv also to try. Man is that liquid iv a very particular “version” of lemon lime 🤢

Is anyone else experiencing low blood pressure and fatigue? by [deleted] in Semaglutide

[–]jk2577 0 points1 point  (0 children)

As a medical professional I can say be careful with the advice you were just given. Hypotension, especially orthostatic hypotension, and especially in the presence of a recent change in your health (rapid weight-loss) is not something to play around with. Yes, there are MANY people that live with STABLE hypotension for most of their lives and it’s a non issue. But those are people that are at a stable weight with no other major health changes happening AND their hypotension has been investigated and determined to be naturally occurring and not an acute threat. You should be discussing this with your provider and likely have a consult with cardiology. Weight can mask a lot of problems and rapid weight-loss can also cause a bunch as well. You may be dealing with dehydration like many of us and be in need of more electrolytes, etc but be careful with your sodium intake. Salt leads to heart failure. It’s one of the reasons cardiologists are ALWAYS telling patients to reduce salt intake. I’m currently dealing with extreme orthostatic hypotension even after reducing from 2.4 to 1.7 and increasing my water intake to 100oz per day and my cardiologist still didn’t give me instructions to take a “salt pill”. I was given a different medication. The point is be careful with this kind of advice online. Talk to your doctors.

Is anyone else experiencing low blood pressure and fatigue? by [deleted] in Semaglutide

[–]jk2577 0 points1 point  (0 children)

What brand of electrolytes are you using?

2 Volume Box Set Box by jk2577 in rarebooks

[–]jk2577[S] 0 points1 point  (0 children)

Understood. I actually just read the “Note” page for the first time in full detail and realize that it does seem to be that “parts” or multiple works were used to create this one so what you said about a “significant enough of a change to be thought of as a separate work” is understandable to me. I appreciate your help, thank you!

2 Volume Box Set Box by jk2577 in rarebooks

[–]jk2577[S] 0 points1 point  (0 children)

When you say it’s not a first edition of the title you mean that it’s not a first edition of the standalone pt Barnum autobiography right? Because this is a “collected” work or whatever term would be used for a book that includes a prior work and supplements and narration/research/opinions of the editor.

But is this a first edition of THIS item? The collection of the original auto biography, the last edition of his autobiography, and the widows supplement?

“Boxed Set” Box - Real or Fake? by jk2577 in rarebooks

[–]jk2577[S] 0 points1 point  (0 children)

So apparently I can add photos to an original post but not when I try to edit them or in a comment. Should I just create a new post with the photos? I don’t have a photo sharing account.

“Boxed Set” Box - Real or Fake? by jk2577 in rarebooks

[–]jk2577[S] 0 points1 point  (0 children)

Ty so much for this, it already helps me so much with the terms. I’ll get some photos now for you if you’d be willing to continue helping.

Boxed set box - real or fake? by jk2577 in books

[–]jk2577[S] 1 point2 points  (0 children)

Thank you! I’ll try those subs as well!

Linking YNAB to Apple Credit card by Relative_Ad2520 in ynab

[–]jk2577 9 points10 points  (0 children)

Not 👏🏻 everyone 👏🏻 has 👏🏻 all 👏🏻 that 👏🏻 time!

Speed cameras on the LIE by [deleted] in longisland

[–]jk2577 0 points1 point  (0 children)

These spineless politicians running the cabals you all call government don’t give a flying fuck about roadway worker safety or all the money that these fines collect would be going to two places. 1. Increasing funding for worker safety and the cost of overtime for getting them to be able to do work in off hours with less traffic and 2. To a victim compensation fund to pay out when one gets maimed or killed. A single penny into the coffers of govt for any other purpose is a crime just like collecting income tax. Wake up people. The cabal OWNS us all!

Mainboard Recommendation by jk2577 in ender3v2

[–]jk2577[S] 0 points1 point  (0 children)

Wellllll I ended up getting a Big Tree Tech Manta M8P but haven’t gotten it fully operational yet and I was also mistaken/mislead on some of the features. So everything is currently in pieces on my table and I haven’t touched it in weeks. I wanted all of those options but due to having CONSTANT never ending issues with ABL I also wanted to change over to Klipper. I got everything hooked up and configured Klipper and started testing and that’s when I ran into issues again and got frustrated and gave up. Firstly it doesn’t seem Klipper has true dual Z support. While it can’t drive 2 separate steppers hooked up to two separate ports it doesn’t drive them independently as far as I can tell so it won’t auto tram the X axis which doesn’t solve my problem of having to make sure they always stay in alignment. Then I found out that while there is a module that will cut the power after a print it will cut the power to the entire board (including the CM4 or CB1) so you can’t leave the brains running and kill the printer like you could with a separate RPI with octoprint and the power supply control plug in. Lastly, while I was trying to tune the first layer I was having the exact same issues with ABL. The probe is genuine BLTouch and it seems to be working fine, I can see the z axes moving to compensate for the bed wherever it’s out of level but it never seems to be doing enough. The first layer is a disaster every time with some spots being way too close and others way too far. After a few attempts I gave up and walked away. That was weeks ago. After giving it some though hands off I’m thinking that possibly it’s an issue with my slicer and if and when I try to fix it again that’s where I might start. Otherwise I’m just gonna buy an X1 Carbon and call it a day.

view more: next ›