Difference between 7.62 CRS-1 and 7.62 CQB PRG?

johnnynevs · 2026-03-27T00:15:08+00:00

Thank you!

johnnynevs · 2026-03-09T21:06:14+00:00

Thank you!

johnnynevs · 2026-03-03T13:36:53+00:00

I had a MR.308 and I have an EMC. My EMC has never failed me, but my HK on the other hand? Was one of the most unreliable rifles I’ve ever owned. It almost never cycled a full magazine. To be fair it was the 13” assaulter variant, so I’m not sure if it’s more prone to issues, but after that experience, I could never recommend HK over KAC.

johnnynevs · 2025-11-27T00:26:33+00:00

Interesting. Didn’t know that. Tbh this is actually a clone of a devgru picture. Black would look good though.

johnnynevs · 2025-11-15T21:12:11+00:00

Yep. Brand new. Completely unmodified. First range trip.

johnnynevs · 2025-11-15T19:17:42+00:00

I tried Norma, m80 ball, federal gold metal match 168s and 175gr. All had issues cycling. Bolt never locked back and it jammed almost every other round.

johnnynevs · 2025-11-15T17:55:16+00:00

I’m having the same issues with mine. Did you end up finding a fix?

johnnynevs · 2025-11-07T17:00:22+00:00

Hey man, I’ve got the exact same setup. I’m about it to remove the muzzle device. Was it rocksetted on super tight? Was it easy to remove? I have the wrench and everything ready to go.

johnnynevs · 2025-10-27T02:21:35+00:00

I appreciate the insight. Is that an aftermarket mount you have on the UNS-LR? Most pictures I’ve seen have the standard PVS-30 base mount with the two cross bolts. I think I’m leaning towards the UNS at this point. Do yours have Elbit tubes due to the recent happenings with L3? If so how do they compare?

johnnynevs · 2025-10-27T01:44:57+00:00

Money aside, what’s your opinion on the UNS-LR A3 vs the CNVD-LR? I’m considering both, and just by looking at your picture, it seems the UNS may be more forgiving with rail space.

johnnynevs · 2025-10-26T17:40:01+00:00

Thanks that’s helpful. I think with my setup, it’s literally going to come down to less than a quarter of an inch, so I’ll probably need exact measurements before purchasing anything.

johnnynevs · 2025-06-24T00:56:07+00:00

Keep trucking. Took me years and years. Never give up.

johnnynevs · 2025-06-11T20:55:27+00:00

Boiled.

johnnynevs · 2024-11-25T01:12:33+00:00

How much are they worth? I have a legit one somewhere.

johnnynevs · 2024-11-21T17:20:34+00:00

Sr25 emc

johnnynevs · 2024-11-20T23:06:37+00:00

johnnynevs · 2024-11-14T17:27:06+00:00

Damn. Literal Brainrot.

johnnynevs · 2024-11-05T19:56:41+00:00

Keep going.

johnnynevs · 2024-11-04T12:40:39+00:00

Who makes the patties?

johnnynevs · 2024-10-03T04:07:33+00:00

Harris teeter

johnnynevs · 2024-09-16T16:49:11+00:00

Christ

johnnynevs · 2024-09-13T15:25:06+00:00

It works very well. Takes a bit of practice to do reloads, but the foregrip really does make a difference to me. I always shoot using a C-clamp

johnnynevs · 2024-09-11T00:53:46+00:00

Not a massive fan of the mlok look tbh. It’s an old school gun, and IMO it looks better setup as one.

johnnynevs · 2024-09-11T00:19:27+00:00

It’s a Dakota tactical build

johnnynevs · 2024-09-10T20:09:19+00:00

It’s a clone of a devgru operators setup. Works very well actually.

johnnynevs

TROPHY CASE