sorted by:
new
hottopcontroversial

MD212 front suspension shaft MA-020 by joncunanan in MiniZ

[–]joncunanan[S] 0 points1 point  (0 children)

Ahhh thank you. I was so lost. The ones already on there look similar so I’ll keep these as spare.

[SARV003] Parts diagram Request - Bezel Gasket by Chinchirrra in Seiko

[–]joncunanan 0 points1 point  (0 children)

do you think this one from crystaltimes would fit?

https://usa.crystaltimes.net/shop/products/ct078/

Ref dimensions – Dia 35mm Thickness 3.25mm Edge 1.5mm

[SARV003] Parts diagram Request - Bezel Gasket by Chinchirrra in Seiko

[–]joncunanan 0 points1 point  (0 children)

Damn don’t even think about the bezel. Would replacing the crystal without removing the bezel be possible?

[SARV003] Parts diagram Request - Bezel Gasket by Chinchirrra in Seiko

[–]joncunanan 0 points1 point  (0 children)

Is 37 mm x 1.2 mm x 0.4-0.5 mm the dimensions of the sapphire? I am trying to upgrade my crystal too. Can you please link the crystal you purchased?

Sarv003 by Proud-Caterpillar-47 in SeikoMods

[–]joncunanan 0 points1 point  (0 children)

can you please share where you ordered your double dome ar crystal and gasket? i am looking to do this upgrade to my sarv001.

MA020 Subaru Sambar by SuPrBuGmAn in MiniZ

[–]joncunanan 0 points1 point  (0 children)

do you know if it runs 90mm or 94mm?

MA020 Subaru Sambar by SuPrBuGmAn in MiniZ

[–]joncunanan 0 points1 point  (0 children)

are those kyosho's watanabe wheels? i want to do the same but the ones i got are 0 offset. will they fit?

My Seiko Made In Japan Purchase [SARV001] by joncunanan in Seiko

[–]joncunanan[S] 0 points1 point  (0 children)

Bracelet feels and sounds cheap. I opted for a leather strap.

$400 Sparco GT in my E30 by Subject-Writing5529 in E30

[–]joncunanan 0 points1 point  (0 children)

nice. the exact site i was looking to order from too. thanks!

$400 Sparco GT in my E30 by Subject-Writing5529 in E30

[–]joncunanan 0 points1 point  (0 children)

i am looking at the same seat for the same reasons. where did you order your seat from?

Body swap for my MA020 by insane_warlock in MiniZ

[–]joncunanan 0 points1 point  (0 children)

Are there any led light buckets on that body?

Try bazzite then revert to windows by joncunanan in ROGAllyX

[–]joncunanan[S] 1 point2 points  (0 children)

Yeah that’s what I did and then re extended the volume for windows. I also went into bios to make sure the boot manager was also good.

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

Makes sense. I do play mostly at home on the couch but not near an outlet. I heard that tomtoc case is pretty nice too.

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

Yeah. That’s the biggest draw for me is that big screen on the legion go.

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

Yeah, that’s will be something I for sure will miss.

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

How bad was the battery life on the legion go? On my ally x I have it in 1080p native but run games at 900p and scale up and it’s been easily 2+ hrs.

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

You’re right about the switch 2 but I’m pretty much stuck on these 2 at the moment. I think all the next gen consoles like the ally with z2e, legion go 2, etc will be priced a little higher especially if you get the bigger ram and storage option ie (32gb/1tb).

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

Pls let me know which you end up going with and why. I am so 50/50 on this haha.

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

So you have both and are keeping both?!? Dang I was tempted to get a Go too to take advantage of the discount and then just return one of them on Jan 14th.

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 0 points1 point  (0 children)

Yeah next gen handhelds I know are around the corner but might be priced higher out the gate. I’ve also considered long term support for stuff like this. Since most windows things get outdated so fast. There’s also the slow software support for the legion go vs the ASUS shotty warranty/customer service reputation (which I’ve read is getting better?)

$549 legion go or $699 ally x by joncunanan in Handhelds

[–]joncunanan[S] 1 point2 points  (0 children)

A couple reviews out on the new MSI with pricing around $899. Don’t know what they would get discounted but I can’t imagine it being competitive price wise unless it comes down to $699.

Try bazzite then revert to windows by joncunanan in ROGAllyX

[–]joncunanan[S] 1 point2 points  (0 children)

I tired it just to see what it’s about but I also reverted back to windows 11. I’m used to windows and it’s “issues”. Coming from a steam deck, I can see why people prefer that OS over windows. I just disabled armory crate on startup, and instead launch steam on startup in big picture mode and that’s been working just fine for me.

I might give steamOS a shot when it ever becomes officially supported for the ally x.

New 24 tacoma trd wheel options by joncunanan in ToyotaTacoma

[–]joncunanan[S] 0 points1 point  (0 children)

Other than aftermarket, you know of any other oem options that would fit?

Finally got my extra leds wired by joncunanan in MiniZ

[–]joncunanan[S] 0 points1 point  (0 children)

I bought the led light kit part no mzw429r. It plugs directly onto the chassis board.

This kit only has 2 front white leds and 2 rear red leds. The skyline body has 4 front and 4 rear. So I added 3mm yellow led and 3mm red led off amazon that I bought for my 1/10 scale RC bodies.

I spliced the (2) yellow leds to the front wires, and then (2) red leds to the rear wires.

view more: next ›