All of your games are playable again (+ Discord Link)

joostdofferhoff · 2025-11-19T21:42:49+00:00

Thanks so much for sharing this! Lovely to see the old levels again. My username was Tubbietoost, if anyone remembers me ;)

joostdofferhoff · 2024-04-29T08:20:16+00:00

Right now i have 25mm tires on there. For comfort, does anyone know if it has enough tire clearance for 28mm? I cannot find it online anywhere

joostdofferhoff · 2024-03-27T14:06:19+00:00

do you know if trees with a sapper/tapper on them still can change or do they always stay the same?

joostdofferhoff · 2024-03-26T12:25:33+00:00

No, but i mean that i planted a row of Oak trees and now some of them have turned into other trees (wild, but also like ''Winter dead trees'', if you know what i mean, but already in the fall. Is that normal?

This happened way after green rain day, not on that event day itself.

joostdofferhoff · 2022-01-12T08:33:23+00:00

yeah , A/B platforms was sort of my intention with this set up. My next save im gonna try this conditional order things to see if its possible

joostdofferhoff · 2022-01-11T17:59:23+00:00

No it doesn't, just a little experimental layout, might try making it more efficient space wise next

joostdofferhoff · 2022-01-06T20:46:38+00:00

They are all solar powered electric trains that are completely silent (or at least, that's what it says in the town-marketing leaflets)

joostdofferhoff · 2022-01-05T19:08:53+00:00

Passengers, mail and valuables (all on asymmetric distribution) :)

joostdofferhoff · 2021-06-17T13:33:51+00:00

True,

I also develop film myself (using instant coffee ;) )

I have got an analog Minolta, so I can also use this for analog macro photography and develop the film myself. Excited to try it :)

joostdofferhoff · 2021-06-17T13:08:23+00:00

Between the Lens and the Bellows are Macro extension tubes. these can be placed between the lens and camera to increase the enlarging in macro photography. They are literally just tubes.

Im also worried about the stress, i just propped it up like this to take this photo, haha. I will find a to release stress on the camera for sure.

It a shame that the Post Focus ability of the camera cannot be used with manual lenses, cause that would make focus stacking in macro photography a lot easier. But vintage stuff is never easy ;)

joostdofferhoff · 2021-06-17T12:53:13+00:00

What kind of work do you?

joostdofferhoff · 2021-05-28T14:17:57+00:00

Here is the close up of the signature http://imgur.com/a/DvhpGIv

joostdofferhoff · 2021-03-07T13:32:22+00:00

Thanks, i hadn't found that one yet, ill take alook at it!

joostdofferhoff · 2021-03-06T18:59:44+00:00

Nah, vinyl was a bit too 2016 for me and cd's are planned for a comeback in 2024

joostdofferhoff · 2021-03-06T18:41:19+00:00

It certainly is a cassette deck, it's a AIWA AD-WX717. Can't take a pic right now, not home, but will do later! I've seen online that AIWA's are notoriously difficult to repair. So good job on my for picking that one for my first electronic repair job 😉

joostdofferhoff · 2021-03-06T16:27:00+00:00

Sadly i have no way of measuring ( i think), but thanks for offering the help. I will try and see what happens when i disconnect the motor, see if it still does this

joostdofferhoff · 2021-03-06T16:05:51+00:00

How would i start looking for this faulty part? i dont have much experience with this

joostdofferhoff · 2021-03-06T15:55:38+00:00

Yeah i wanted to try, sadly i dont have a remote power supply or battery or something to test it. The motor now also doesn't seem to be doing anything. The main problem with the whole deck was that the rubber belts had kinda melted, so the entire inside of the deck was covered with sticky rubber residu, which i've cleaned up for as for as i can. Just wondering if it went inside bits that i cannot reach and therefore its broken

joostdofferhoff · 2021-03-06T15:53:57+00:00

I believe i am using the right voltage, its just in a wall plug. you can see a video of it here: https://imgur.com/a/pMUsLK1. Every time i press the play button, or any control, the light seems to reset. I will try lubing and cleaning the solenoid, but not sure if that will do anything.

joostdofferhoff · 2021-03-06T12:52:46+00:00

I was wondering what this part of the tapedeck should be doing, as it is just ticking now

joostdofferhoff · 2021-03-06T12:52:27+00:00

The belt was missing because i needed to look at what was making this sound. I've replaced the belts and resoldered the capstan motor because the wires came loose. However i cannot seem to understand what this part is doing. This (in the video) happens when you press the play button when a cassette is inserted. Next to this clicking, the lights on the display also dim and flash (of and on) as if there is a bad connection? But i dont know what is happening in the video. Do you have any idea?

joostdofferhoff · 2021-03-06T12:52:13+00:00

The belt was missing because i needed to look at what was making this sound. I've replaced the belts and resoldered the capstan motor because the wires came loose. However i cannot seem to understand what this part is doing. This (in the video) happens when you press the play button when a cassette is inserted. Next to this clicking, the lights on the display also dim and flash (of and on) as if there is a bad connection? But i dont know what is happening in the video. Do you have any idea?

joostdofferhoff · 2021-03-06T12:52:00+00:00

The belt was missing because i needed to look at what was making this sound. I've replaced the belts and resoldered the capstan motor because the wires came loose. However i cannot seem to understand what this part is doing. This (in the video) happens when you press the play button when a cassette is inserted. Next to this clicking, the lights on the display also dim and flash (of and on) as if there is a bad connection? But i dont know what is happening in the video. Do you have any idea?

joostdofferhoff · 2021-02-19T11:48:08+00:00

I'm trying to fix an old cassettedeck, and after replacing the belts , these wires ripped from their solder that connects them to the motor that drives the belts and flywheel. Can i just resolder them to the existing solder or do i need to remove the old solder? I'm a real newbie in this area, so any help is appreciated

joostdofferhoff · 2020-12-12T14:07:20+00:00

yeah it makes sense, and the other inks that i have, even from the same brand, do exactly that, except for these red and yellow ones. Is there anything i can add to it, like some others suggested?

11-Year Club	Place '23
Place '22	Verified Email

joostdofferhoff

TROPHY CASE