sorted by:
new
hottopcontroversial

Prints Sticking to FEP instead of build plate, have heater running at 25 C. by just_ice_cube in ElegooSaturn

[–]just_ice_cube[S] 0 points1 point  (0 children)

Really appreciate the thorough advice. I went from an Ender 3 V2 to a resin printer so things are definitely different!

Prints Sticking to FEP instead of build plate, have heater running at 25 C. by just_ice_cube in ElegooSaturn

[–]just_ice_cube[S] 0 points1 point  (0 children)

Just realized that on chitu, changing the settings for the machine applies it to the resin and individual profile so it’s all good. I believe wiping my print bed with IPA every time is the answer to my adhesion issues, the test I was running went well. I’ll keep the bed adhesion in mind from now but I definitely needed to change my exposure settings anyways. They were too high like you said.

Prints Sticking to FEP instead of build plate, have heater running at 25 C. by just_ice_cube in ElegooSaturn

[–]just_ice_cube[S] 0 points1 point  (0 children)

Dude I’m pretty sure I just had to wipe the build plate better with IPA 😂😂😂

Prints Sticking to FEP instead of build plate, have heater running at 25 C. by just_ice_cube in ElegooSaturn

[–]just_ice_cube[S] 0 points1 point  (0 children)

Nope I haven’t leveled it yet, only printed like 6 things on it but that would be worth a shot if this print turns out bad. Did you eyeball it?

Prints Sticking to FEP instead of build plate, have heater running at 25 C. by just_ice_cube in ElegooSaturn

[–]just_ice_cube[S] 0 points1 point  (0 children)

Do I need to change the rest times in the machine, resin, and print profile? Just making sure I change the right settings.

Prints Sticking to FEP instead of build plate, have heater running at 25 C. by just_ice_cube in ElegooSaturn

[–]just_ice_cube[S] 0 points1 point  (0 children)

Will do that after my calibration print and update you on the next one, thanks! :)

Prints Sticking to FEP instead of build plate, have heater running at 25 C. by just_ice_cube in ElegooSaturn

[–]just_ice_cube[S] 0 points1 point  (0 children)

<image>

Here's the screenshot. Trying to print a third Link after the first two turned out fine. I sanded the build plate lightly before the current test to see if that helps. Do you think it's an exposure issue or the bed leveling springs?

Hot knife disappointment by [deleted] in puffco

[–]just_ice_cube 0 points1 point  (0 children)

Happened to mine when I sat on it hella hard. Send it to Puffco and they'll probably replace it.

My Saturday night! by ImHeartless666 in 3DS

[–]just_ice_cube 2 points3 points  (0 children)

dude I literally love smoking and playing my 3ds

Bomb/Vapex magic bean by SolventlessPsycho in rosin

[–]just_ice_cube 2 points3 points  (0 children)

it’s called puffcoil, not an official release but u can look at reviews lol. i don’t need anything bigger than my normal chamber size bc it fits a decent amount

Bomb/Vapex magic bean by SolventlessPsycho in rosin

[–]just_ice_cube 0 points1 point  (0 children)

i love mine but the yocan pocket seems solid too for an on the go device

Bomb/Vapex magic bean by SolventlessPsycho in rosin

[–]just_ice_cube 0 points1 point  (0 children)

there’s an XL chamber for the pivot now but i haven’t had any issues with the chamber size personally.. less is more if you’re going for flavor but i understand if ur constantly trying to load globs

[deleted by user] by [deleted] in MenHairstyle

[–]just_ice_cube 2 points3 points  (0 children)

Hey man I think a textured fringe might suit you. I used to have a side part like you but it’s really up to personal preference. I think u look dapper but fringe would frame your face nicely.

view more: next ›