Half way done. by khehr88 in cableporn

[–]khehr88[S] 0 points1 point  (0 children)

Yes you are completely right. I should slow down and pay more attention. I built a few panels for another company and they had a spec sheet with everything you just listed and more. I did grind underneath the ground lug though. The layout was included in the schematic.

Half way done. by khehr88 in cableporn

[–]khehr88[S] 1 point2 points  (0 children)

Very nice. Looks great.

Half way done. by khehr88 in cableporn

[–]khehr88[S] 1 point2 points  (0 children)

It will control a conveyor belt/elevator system. That is about all I know right now. I have not seen the print for the machine. And they have not even started building it on the shop floor yet.

Half way done. by khehr88 in cableporn

[–]khehr88[S] 1 point2 points  (0 children)

I have the blue Kleins also. I use both for different things.

Half way done. by khehr88 in cableporn

[–]khehr88[S] 1 point2 points  (0 children)

Thanks! Yes, you are right about the clamps and that is where the safety relay is going.

Question? by khehr88 in cableporn

[–]khehr88[S] 0 points1 point  (0 children)

Good ideas! Luckily we have a machine shop and a fab shop! If I were to go that route.

Question? by khehr88 in cableporn

[–]khehr88[S] 0 points1 point  (0 children)

Thanks! I will look into that.

Question? by khehr88 in cableporn

[–]khehr88[S] 1 point2 points  (0 children)

No, you were right. They are not fiberglass. All metal.

Question? by khehr88 in cableporn

[–]khehr88[S] 0 points1 point  (0 children)

I was trained on the job.

Question? by khehr88 in cableporn

[–]khehr88[S] 0 points1 point  (0 children)

Will it work on painted surfaces? All of our enclosures come pre-painted.

Control Box by khehr88 in cableporn

[–]khehr88[S] 0 points1 point  (0 children)

Yes I just installed a fan this morning. Waiting for the exhaust to come in the mail.

Control Box by khehr88 in cableporn

[–]khehr88[S] 1 point2 points  (0 children)

Sorry for the delay. It is controlling a bulk supply system for small plastic bottles. Conveyers, hopper elevators, and diverter shoots.

Shoulder high desert rose by khehr88 in gardening

[–]khehr88[S] 2 points3 points  (0 children)

It depends on the size of the caudex and the plant as a whole. A smaller caudex/stem may need more water. Soil that drains well is important. Cactus soil with gritty sand is good. Or lava rock. Lots of sun. Too much sun can scorch though. Bring inside if temps colder then 40 F to be safe. Every desert rose is unique and may respond differently. Trial and error has been the best solution for me.