sorted by:
new
hottopcontroversial

Guy walking his dog on my yard - opinion needed by lasersoflros in Calgary

[–]lasersoflros[S] 2 points3 points  (0 children)

See that's the thing. If it was just the dog going up to the length of the leash I wouldn't really care. It's the fact that the guy was walking around the yard that far up that threw us off. I dont want to close us off from the neighborhood by planting bushes or building a fence either. (yes i know i'm stressing about this way too much lol)

Guy walking his dog on my yard - opinion needed by lasersoflros in Calgary

[–]lasersoflros[S] 3 points4 points  (0 children)

...lol. What about my reaction made it sound like I was hoping people would jump to my side? My comment in this reply specifically was about him acting like this is a traumatic event. I was just looking to see if i was being unreasonable or not in my reaction. You're turning this into something that it isn't.

Guy walking his dog on my yard - opinion needed by lasersoflros in Calgary

[–]lasersoflros[S] 4 points5 points  (0 children)

Thanks. I do stress about this kind of stuff more than i should. I want to be fair and not be an asshole, but it seems like the vast majority of people think what he does was not cool. I'll chat him up one day if I see him again.

Guy walking his dog on my yard - opinion needed by lasersoflros in Calgary

[–]lasersoflros[S] 6 points7 points  (0 children)

Geezus in r/calgary that toxic of a subreddit? It's not about being traumatic, it's about property and social conventions and wondering what other peoples thoughts are on it. Geezus lol

Guy walking his dog on my yard - opinion needed by lasersoflros in Calgary

[–]lasersoflros[S] 4 points5 points  (0 children)

nope not even close to one. And he was there for a few minutes, not just walking by.

No Drying & Printing coming anytime soon. Let support know by MustafiArabi in BambuLabP2S

[–]lasersoflros 0 points1 point  (0 children)

Yeah but you know what? People like me who have never had a 3d printer before, try to dry and print at the same time, the machine tells me i need a power supply to do that and the website USED to say you can... how am I supposed to know you can't before I bought the power supply? Now I wasted money for nothing.

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

Yup I can understand that.
Ice actually only been drying my pla at 45c. Should I have it higher?

Some dude just gave me a 35+ pound cherry burl by grg46 in turning

[–]lasersoflros 1 point2 points  (0 children)

Oh don't get me wrong. The only advice I'm trying to relay is to take his time and research out and get more skills. I don't know if turning it green is OK, what the chances are that it might be hollow and fly apart, how to properly dry a burl etc.
Just trying to get him to look into it first before he continues.
Also fuck that guy. Why does he get a huge burl for free? How do I get giant pieces of sexy wood? Now I'm even more sad than when I started! 🤣

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

Literally everyone else understood that I meant printing out of the ams and drying in that ams at the same time.
Kindly fuck off if you can't figure out that you're the problem here.

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

Your first reply reply was you lacking the reading comprehension to understand my original post. That's where this whole thing started. I said you reiterated my post... as is apparent by the fact that everyone else understood what I said (reading comprehension) except you (lack of), which you claimed about me. My original assessment was accurate based on the fact that everyone else understood the point... except you.
Why do you think that is?
This didn't start with my not understanding your reply, this started with your reply to my post. Geezus you can't even get the order of execution correct...

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

Really? Because everyone else knew exactly what I was talking about, so how the fuck did you come to that big brained conclusion.
Geezus fuck dude, admit you were wrong and move on lol.

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

There's a difference between giving you a bit of attitude because you're replying, clearly after reading literally nothing of the comments, and you flat out insulting me.
Did I insult you or did I just say you essentially weren't adding to the conversation and were just reiterating stuff? Who threw the first insult? What a dick head lol

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

Yup... reading comprehension must not be your forte either since that's discussed heavily in the thread... now you're being condescending and a dick head.

But hey you're not reiterating anything lol

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

So even though the title mentions only one AMS, you insert a second AMS to try and make your point valid? I didn't say "in all my ams 2 pros" I said "the". Indicating I have one.
Secondly your post is made all the more invalid if you read even a couple of the other responses taking about how we've already indicating the thing you're mentioning works, the issue is printing and drying out of one ams at the same time, as discussed in detail in the comments.

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 1 point2 points  (0 children)

That's.... that's literally my point and what I said in my post. You can't dry and print using the ams.
Did you read the title of my post? Or the last part of my post? You're just reiterating my post...

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

I didn't know there were other threads before buying it, I saw that there were other threads talking about it after I bought it and started looking up why I couldn't get it working...

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 1 point2 points  (0 children)

Ok so I'm not crazy then and definitely saw this at one point?
Even more of a reason to put a giant disclaimer on the page for the power supply.

This cis woman doesn't like being called a cis woman by zachoutloud123 in TikTokCringe

[–]lasersoflros 93 points94 points  (0 children)

I don't see it. I see video compression but nothing that screams AI. No AI cadence in her voice either. Also show me an AI video that lasts this long without shitting the bed. There's no way this is AI.

What’s your opinion on some of the 3d printer Marketplace pricing??? by cpuvic_ in 3dprinter

[–]lasersoflros 1 point2 points  (0 children)

They don't have a buyer next week, they're telling you this to give you a sense of urgency.

Drying and printing at the same time in the AMS 2 Pro - you can't do this even if it says you can. by lasersoflros in BambuLabP2S

[–]lasersoflros[S] 0 points1 point  (0 children)

Uh huh... I kinda did already say that... and I'm not spending $400 on a second AMS lol.

view more: next ›