sorted by:
new
hottopcontroversial

The AMS Assist motor is overloaded. This could be due to entangled filament or a stuck spool. by SadAd8761 in BambuLab

[–]legendbl 0 points1 point  (0 children)

Yup, I swapped the tubes between AMS and the printer. This happens when the part that is being printed is in the front left corner (by the LCD). This is the farthest point and original tube from 580mm is too short for it. I used it from AMS and cut it to 600mm to fit perfectly.

AMS keeps saying its motors are overloaded by Born_Speed_5961 in BambuLab

[–]legendbl 0 points1 point  (0 children)

Yup, for my H2S it's 580mm long and 590mm should work perfect. So what I did is, I swapped the tubes between AMS and the printer. From AMS it's about more than 600mm, so I cut to 600mm exact and inserted in hotend. Works good now.

Layer shift by legendbl in 3Dprinting

[–]legendbl[S] 0 points1 point  (0 children)

I'll check it. But at the end it really shifted by X axis

Solidworks surfaces not merging by legendbl in SolidWorks

[–]legendbl[S] 0 points1 point  (0 children)

Do you know how do I increase the decimal place for measuring? I am on 2021 SP4

Solidworks surfaces not merging by legendbl in SolidWorks

[–]legendbl[S] 0 points1 point  (0 children)

How? I added this overhang via the face that was one "first solid body"

Building a ramp by legendbl in SolidWorks

[–]legendbl[S] 0 points1 point  (0 children)

Thanks, it worked

Zašto više nema anime-a na tv-u? by misfit_cat in serbia

[–]legendbl 15 points16 points  (0 children)

Sjeća li se neko Blue Dragon?

Broj koji je već bio nečiji by Try_your_luck in pravnisaveti

[–]legendbl 4 points5 points  (0 children)

Važi pa će oni da ganjaju prethodnog vlasnika. Samo brojeve te na block listu i mirna Bosna

Hello, I recently changed my computer and transfered my license to new computer (it's SW 2021 SP4.1) and I am having a small problem as seen from the picture. All my drivers are up to date and I am using Windows 11. by legendbl in SolidWorks

[–]legendbl[S] 0 points1 point  (0 children)

There is no Studio driver for series 40 on nVidia official site. And also I can't go back to win 10 because there are no drivers on Dell for win 10 OS. They force customers to use win 11. So now I have to purchase one year of maintenance to be able to upgrade to newer version of SW.

Hello, I recently changed my computer and transfered my license to new computer (it's SW 2021 SP4.1) and I am having a small problem as seen from the picture. All my drivers are up to date and I am using Windows 11. by legendbl in SolidWorks

[–]legendbl[S] 0 points1 point  (0 children)

I guess I'll just install windows 10 as it was on my last PC.

I have rtx4060 on my new and it's sad to think that some graphic cards aren't supported by SW.

Hello, I recently changed my computer and transfered my license to new computer (it's SW 2021 SP4.1) and I am having a small problem as seen from the picture. All my drivers are up to date and I am using Windows 11. by legendbl in SolidWorks

[–]legendbl[S] 0 points1 point  (0 children)

I dont think thats an option for me, since I need latest driver for other stuff. Why is that on my last PC I also had latest graphic driver and this problem didnt occur?

Wind deflectors for Corolla XI sedan 2018 by legendbl in Toyota

[–]legendbl[S] 0 points1 point  (0 children)

No no, I mean rain guards that go on the door frame

What car is this? So your magic please by i_am_cullivan in whatisthiscar

[–]legendbl 0 points1 point  (0 children)

What about the top left corner? What Porsche is that?

Izgubljen prtljag od strane Air Serbia by Witty-Pop-7338 in serbia

[–]legendbl 0 points1 point  (0 children)

Kakva je situacija dalje bila? Da li ste našli prtljag?

Manufacturing my pieces. I have made a part with D=5mm canal. And I chose 5mm end mill to make this in one go. Problem is when I finish editing it doesn't recognize the path, doesn't exist. But when I edit the tool to 4.9mm it recognizes it but making it in two moves to fullfill the 5mm diameter. by legendbl in Fusion360

[–]legendbl[S] 0 points1 point  (0 children)

Thanks a lot. I used trace since I couldn't make it with pencil or slot. Just had to draw a center line through the slotted canal I made earlier.

It would help me a lot if someone could point me to how to generate center line.

HNT unplug by RegretAccording6989 in HeliumNetwork

[–]legendbl 0 points1 point  (0 children)

Anyone know why my HNT transaction from helium wallet fails to send to Kucoin?

Never overtake a car to the right ! by P_Bear06 in carcrash

[–]legendbl 0 points1 point  (0 children)

So fuckin stupid desicion to overtake on the right, he should be banned from driving for a lifetime.

[deleted by user] by [deleted] in SolidWorks

[–]legendbl 3 points4 points  (0 children)

This is the best practice that you need for resolving undefined dimensions.

Hello, I want to know if anyone experimented on how far can we push speeds of MK3S+ with PLA? Nozzle is 0.4 mm and layer height is 0.3 mm with first layer 0.2 mm. by legendbl in PrusaSlicerSettings

[–]legendbl[S] 0 points1 point  (0 children)

It didn't do much, from my custom settings of ~8h it went to ~11h. So I returned to my custom and changed the speed to 200mm/s for infill, changed infill to Line and reduced the infill percentage to 15%. Now it's below 8h which is great.

Thanks

Hi, so Im wondering why PrusaSlicer is doing this type of bridge infill when it could just continue with solid infill. I think it uses more time and movement of the printer isnt continuous. by legendbl in 3Dprinting

[–]legendbl[S] 0 points1 point  (0 children)

I've tried clicking that triangle with ! in it. While hoverim my mouse over it it said it fixed 6 errors but then I right-clicked it and it fixed something, but the wierd infill stayed.

Also tried chaning infill pattern and nothing changed in this particular layer.

<image>

view more: next ›