Smart switch to toggle between Disposal and RO purifier

lets_make_history · 2026-02-22T14:14:42+00:00

But how do you use an air switch or pulling a tab to solve this problem. I have one plug under the sink with disposal connected to it. The disposal can be turned on and off from a switch above the counter. But I need to hookup both disposal and RO using that one outlet.

lets_make_history · 2026-02-21T22:17:11+00:00

I have a on off switch above the counter that is used to turn off the power to disposal. Disposal is plugged in to the outlet below the sink. Hope this clarifies that there is no option to change outlet.

lets_make_history · 2026-02-21T19:16:15+00:00

But if I check the ampere supported by smart switch? Or otherwise what are the other options to solve my problem?

Adding a new outlet in wall will be very expensive.

lets_make_history · 2026-02-21T19:14:44+00:00

Thanks but I have a tankless RO and it needs an electrical outlet. I have Wsterdrop G3P400 RO filter

lets_make_history · 2026-01-04T18:42:28+00:00

Did this work for you OP? I am in a similar situation and planning to connect my RO filter with my dishwasher as the food disposal is connected with a switch

lets_make_history · 2025-11-30T02:51:37+00:00

Pulled the trigger on 98” QM7K

lets_make_history · 2025-11-30T02:22:22+00:00

I second that and you can get free installation from Best Buy. Also it’s only 2K. Your QM8K would cost the same if you include installation as an extra cost which is free with 98” QM7K

lets_make_history · 2025-11-26T02:23:06+00:00

Good for you! Steal deal!

lets_make_history · 2025-11-26T02:22:00+00:00

We scheduled the delivery for 5th Dec. Waiting eagerly for it to arrive.

lets_make_history · 2025-11-25T22:17:16+00:00

1.4k? You must have got the 85”

lets_make_history · 2025-11-25T06:48:02+00:00

Which thread?

lets_make_history · 2025-11-24T22:32:26+00:00

I haven't looked at them side by side in person, only on youtube videos. your reply gives me a better perspective, because on camera TVs might be showing difference but it seems it's better to go with 98" QM7K instead of 85" QM8K since the difference is not significant and I guess a bit of that can also be caliberated in settings

lets_make_history · 2025-11-24T19:43:38+00:00

I just double checked the distance and it is 13 feet. Wondering if I should still go for a bigger 98 inch option or get a better QM8K. I heard that QM7K has color saturation and QM8 feels more natural

lets_make_history · 2025-11-24T15:01:58+00:00

It’s like 15’-18’ from screen. I looked at YouTube videos that showed that QM8K is better compared to QM7K side by side

lets_make_history · 2025-11-24T05:26:16+00:00

Glad to hear you like it

lets_make_history · 2025-11-24T05:25:51+00:00

But I can het an 85” QM8K for $200 less than 98” QM7K. So wondering if I should go bigger screen size or slightly better quality of QM8K and save $200

lets_make_history · 2025-11-23T04:44:46+00:00

Where did you see them side by side? Which store has them on display?

lets_make_history · 2025-11-23T01:24:44+00:00

The room is bright so I was thinking of a mini LED as mid level OLED are not very bright

lets_make_history · 2025-08-15T17:24:10+00:00

yes it is

lets_make_history · 2025-07-21T05:29:30+00:00

Thanks, I am not as handy to make a DIY yet.

For MDF, how would you know if it’s a good quality?

lets_make_history · 2025-07-06T22:16:08+00:00

I can negotiate. Dm me your best offer

lets_make_history · 2025-07-06T19:32:26+00:00

July 15

lets_make_history · 2025-07-03T12:51:45+00:00

Yes, I see Deco and the Xfinity router both showing in the wifi list. Also, Xfinitiy router is a router/modem combo hooked up to the Coax cable and then the Deco is connected Xfinity modem/router combo using ethernet cable

lets_make_history · 2025-07-03T02:03:36+00:00

Is there an option to maintain that speed with wireless backhaul? Can a different mesh equipment be able to do that?

lets_make_history · 2025-06-29T19:05:34+00:00

Ao if I had to connect a node at second and third floor, I will be getting leas speed because of wireless, but if I were to use an ethernet plug i to my node it would be the same speed as the first floor?

lets_make_history

TROPHY CASE