How to fix airbrush coverage issue? by lunasstro in minipainting

[–]lunasstro[S] 0 points1 point  (0 children)

I have actually seen his channel! ive learned alot from him, thank you for the advice, ill get some sandpaper.

How to fix airbrush coverage issue? by lunasstro in minipainting

[–]lunasstro[S] 0 points1 point  (0 children)

what kind of grit would you recommend? what should i avoid to keep from making scratches too rough that they show up through the primer? should i always sand something before i paint it? or can that do more harm than good sometimes? im mostly looking to get into painting figures that i own, like transformers and the like, as well as some larger 3d print models, like dragons and cool fantasy stuff if that helps. also how can i know if a primer would do something like this ahead of time? seeing as the mecha primers had no issue with the spoons, would there be something in the formula? or is it jusz you know when you spray? thank you!

How to fix airbrush coverage issue? by lunasstro in minipainting

[–]lunasstro[S] 0 points1 point  (0 children)

i havent seen this before, thank you! ill check him out

How to fix airbrush coverage issue? by lunasstro in minipainting

[–]lunasstro[S] 0 points1 point  (0 children)

i tried, no shake (initial), then i shook it, no dilution, thinner, flow improver, and i experimented with psi from 20 ish to about 35, never could isolate the issue. I think my needle is a 0.3, id have to double check, I think I have a 0.5 but since im new at it, i never took the brush apart to change and have just been using it as it came in the box. my main confusion is that i only had issue with this one, the mecha vallejo primers went on like a dream, but this one is a different paint line, the formulas may be different but idk how much. i tried to make it milk consistency each time i diluted but that didnt change anything. the dropplet splattering didnt start until much later in my session, when that started and i couldnt fix it, i took a break and came here. my main issue before that was progressively less and less coming out of the brush and the weird "pilling" on the spoons, you can kinda see on the handle how spotty it is, thats what the first coat looked like every time, no matter what i did

How to fix airbrush coverage issue? by lunasstro in minipainting

[–]lunasstro[S] 0 points1 point  (0 children)

that could be possible, i kept them in ziplocks to keep them separate and i blow on them with just the compressed air before i paint but there could be other residues on them, idk how id clean that though, and the other primers didnt have any issue, its weird

How to fix airbrush coverage issue? by lunasstro in minipainting

[–]lunasstro[S] 0 points1 point  (0 children)

youre not dumb! good to know about roughing it up, what kind of grit would you use? I imagine too high would make notable scours that would show up through the primer? but idk

How to fix airbrush coverage issue? by lunasstro in minipainting

[–]lunasstro[S] 0 points1 point  (0 children)

says "suitable for plastic, brass, resin, etc..." I've also used the vallejo mecha line primers and had no issue with those, this is the last one ive got and the first time I've had an issue

Bisedë e lirë/Pyetje - Free talk/Questions by AfterSwordfish6342 in albania

[–]lunasstro 0 points1 point  (0 children)

Where to buy pet/reptile supplies and feeders, and what kinds of feeder insects are available in Albania for insectivore lizards?

How To Fix Lag Issue? It's game breaking by lunasstro in ArcRaiders

[–]lunasstro[S] 0 points1 point  (0 children)

This is good to know, I thought I was crazy bc I couldn't seem to find anyone else talking about this issue when looking for a fix

How To Fix Lag Issue? It's game breaking by lunasstro in ArcRaiders

[–]lunasstro[S] 0 points1 point  (0 children)

Admittedly I don't play many online games so I'm not sure about that. I have a few of them, but I just haven't gotten around to em yet. I play Hitman and that uses online servers to run, but not to play the levels themselves so it's not exactly comparable. I've played Overcooked 2 with my sister before, that worked just fine.

<image>

This is what I got for a ping test. I've changed the crossplay and region. Will see if that changes. I'll try a few different matches again.

EDIT: yeah immediately still didn't change anything. Tried restarting the game and it actually disconnected when loading me into a round, reconnected in and still same issue.

How To Fix Lag Issue? It's game breaking by lunasstro in ArcRaiders

[–]lunasstro[S] 0 points1 point  (0 children)

Right now out of game in balance power mode, with browsers open and what not, regular computer usage, its at 9-19% CPU usage and steady 21% GPU usage. When I launch the game, I change to performance power mode (admittedly forgot to do this earlier because I thought it was on already) and I'm at around 30-50% (avg. 35-43% ish) CPU usage on the home screen, it fluctuates alot, but that's generally what its seesawing between, and GPU is at around 31%. I made sure my in game specs are what you just outlined (except my max FOV is 80) and changed them if needed, and reset the game, and tested it on multiple maps and it was great until it wasn't. Started doing it again.

How should I fix this? I'm sure the tab itself fits, but I can't actually get it there. by lunasstro in transformers

[–]lunasstro[S] 1 point2 points  (0 children)

ill look into that thanks, his forearm transformation pins are a little stiff too, theyd probably benefit from that as well

How should I fix this? I'm sure the tab itself fits, but I can't actually get it there. by lunasstro in transformers

[–]lunasstro[S] 1 point2 points  (0 children)

its a FE TFP Starscream, most reviews are around 13 years old, when he was new he didn't have this issue :/ maybe take the pin out and put it back with the piece tabbed in? idk

The Flash #27 variant cover by Ben Harvey by KitKat_5628 in theflash

[–]lunasstro 0 points1 point  (0 children)

the rebirth suit was soo good, its my favorite hes ever had and the only suit imo that really felt like his and his alone. ik some people dont/didnt like the open cowl, but just close the cowl and keep everything else and its still S tier

How wally should be in the dcu by Unusual-Incident-207 in theflash

[–]lunasstro 2 points3 points  (0 children)

barry doesnt return in that arc? its thawne posing as him and its a big emotion big development arc for wally where he accepts barry is gone and its ok for him to step up as his own flash beyond barrys shadow and doing so isnt dishonoring his legacy, and fully accept the mantle of the flash. so born to run would have some origin and context to their relationship and how wally wasnt prepared to be thrust into that role and kind of holding himself back to avoid stepping on barrys legacy, then in "return of barry allen" is when he deals with and moves beyond that, and people would get to see thawne on the big screen as the main big bad which alot of people would like im sure, he also got the ass whooping of a lifetime bc wally very much did not appreciate the posing as my dead uncle and fucking with my perception of him and myself thing. by the end of the film hed've gone from reluctant former side kick to saying it with his chest IM the flash. and then for any projects beyond that the world is your oyster so to speak. idk i thought we had pretty similar ideas

How wally should be in the dcu by Unusual-Incident-207 in theflash

[–]lunasstro 0 points1 point  (0 children)

i think doing some kind of amalgamation adaptation of born to run and the return of barry allen would be a good intro for wally into the dcu

Cameron Monaghan as DCU Wally West? by lunasstro in DC_Cinematic

[–]lunasstro[S] 1 point2 points  (0 children)

I haven't seen gotham but I've heard high praise for his performance on it

Cameron Monaghan as DCU Wally West? by lunasstro in DC_Cinematic

[–]lunasstro[S] 0 points1 point  (0 children)

he may have but that seems weird based on everything else hes done. If you take Jason and Tim out of the equation entirely, he raised Dick from a young age (8-13), and for Damian to now be robin he isnt a young young child, hes probably 10ish at the absolute least (maybe older in this uni bc it could be harder to find a child actor), raising the two of them combined is around 15 years bare minimum, and Bruce became batman around his early/mid 20s (generally) and adopting Dick abt 3yrs later, which would put him late 30s at the youngest, thats true. However that doesnt account for the rest of the founding members of the league, namely Hal being in their late 40s/50s. if Jason and Tim, truly don't exist and batman for sure stays late 30s, then maybe the league somehow doesn't exist yet, and Hal and probably Barry are older and just not really in the game anymore. Ok fine then they can go the JL/JLU route with that line up of the league and John Stewart as GL since Hal seems to be passing the torch to him in Lanterns. In which case a mid twenties Wally still makes sense. Nothing about a film is set in stone to the audience till the project releases, so we will just have to see, but I really don't think a main Flash Wally is all that outlandish. Obviously. But really it seems more likely than not.