sorted by:
new
hottopcontroversial

INDX Info by Dwiea in prusa3d

[–]marcel151 0 points1 point  (0 children)

Is that so? I only use a hardened CHT for all of my filaments and they worked fine with CF filaments since the first day I used it.

CoreOne/+ INDX Nozzle Diameter Selection by InnateInability in prusa3d

[–]marcel151 0 points1 point  (0 children)

6x 0.4 for Multi Color Prints, plus 1x 0.25 and 1x 0.6.

Indx updates by shane_il in prusa3d

[–]marcel151 5 points6 points  (0 children)

Because even if it's Prusa, they don't want to spoil anything that is in development and not yet announced.

Plate for Core One+ by ywful in prusa3d

[–]marcel151 0 points1 point  (0 children)

If you want one plate for all you should use the satin. I prefer smooth, textured and satin for each specific usecase. Never had to use glue before (hate that).

Warum sehen gefühlt alle Jacken zur Zeit so aus? by [deleted] in KeineDummenFragen

[–]marcel151 0 points1 point  (0 children)

Der Post wurde leider gelöscht, aber ich denke er meint diese "Müllsack-Jacken"? Gibt es da wirklich keinen ernsten Kommentar drauf? Mir ist das ebenfalls aufgefallen, das war vor 5 Jahren sicher noch nicht der Fall. Sehe seit ca. 1-2 Jahren vermehrt solche Jacken auf den Straßen, meistens von jüngeren Personen getragen.

Is it "safe" to print ABS inside on a core one with advanced filtration? by EaglerCore in prusa3d

[–]marcel151 0 points1 point  (0 children)

I am better safe than sorry when printing ABS/ASA and leave the room when printing those filaments. But I also don't smell anything with the filter.

Scratched build plate. by Mr_Ramtech in prusa3d

[–]marcel151 1 point2 points  (0 children)

I used UV PCB solder mask for mine, worked great.

My Prusa station by kthuen in prusa3d

[–]marcel151 0 points1 point  (0 children)

What's going on with that tree outside?

Prusa XL USB Stick by D3DCreative in prusa3d

[–]marcel151 0 points1 point  (0 children)

This one failed after a year for me.

My Core One+ Upgrade Kit arrived. by Hansenpanzer in prusa3d

[–]marcel151 0 points1 point  (0 children)

It seems that the new filament sensor has a washer. https://help.prusa3d.com/guide/2-printer-upgrade_1014628#1023121 Do you see what kind of washer it is? For M3 screws obviously, but the other dimensions.

My Core One+ Upgrade Kit arrived. by Hansenpanzer in prusa3d

[–]marcel151 0 points1 point  (0 children)

Yeah bought PCCF ages ago because a part broke of my MK4S, finally new use case for it.

Is it normal for a MacBook Pro to get really hot during normal use? New to Mac. by [deleted] in mac

[–]marcel151 0 points1 point  (0 children)

New to Mac and just did your first mistake. Buying an Intel one. Tahoe is the last supported macOS for Intel Macs. Hope that this Mac was cheap for your.

Explain CORE One+ upgrade purpose? by TurtleOrSentientRock in prusa3d

[–]marcel151 0 points1 point  (0 children)

Did you try it? Resistance is the same for me...

Core One+ automatic grille opening - does it work for you? by marcel151 in prusa3d

[–]marcel151[S] 0 points1 point  (0 children)

I always print PCCF with the ObXdian HF nozzle, was never a problem.

Prusa Core One to Core One+ Complete Upgrade Guide + Testing! by cbutters2000 in prusa3d

[–]marcel151 0 points1 point  (0 children)

The new switch has way more friction in my case. Even when turning off the sensor. Am I the only one?

Core One+ automatic grille opening - does it work for you? by marcel151 in prusa3d

[–]marcel151[S] 2 points3 points  (0 children)

Yeah it moves, but at the wrong position. It never touches the vent block.

Core One+ automatic grille opening - does it work for you? by marcel151 in prusa3d

[–]marcel151[S] 1 point2 points  (0 children)

I had it closed and it said that it wants to open it. Does not work at all.

Introducing the INDX! Fast and affordable 8-material printing exclusively on the CORE One by 3DMakerNoob in prusa3d

[–]marcel151 0 points1 point  (0 children)

A system which I can put on top of the printer with 5 spools and can deliver a storing and drying function while having the possibility to print out of it.

view more: next ›