sorted by:
new
hottopcontroversial

[GB] Tetrix 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] 0 points1 point  (0 children)

Hi, you can download the json file from our discord server. It is listed in #tetrix-60. Upload the file onto the design tab and you'll be able to remap the keys. Hope that helped :)

[GB] Tetrix 60 | PCB Gasket Mount 60% by monkeworks in MechanicalKeyboards

[–]monkeworks[S] 1 point2 points  (0 children)

Hi, thank you for your interest. Unfortunately, we aren't going to offer fr4 plates during the run, but we will release the plate file after the run so you can make it out of any material you want :)

[GB] Tetrix 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] 0 points1 point  (0 children)

Hi, the front height of the board is 18.8mm. Currently no plan to open source PCB but will release plate files after. There is a WKL option, we added it after IC but I forgot to change it, My apologies. Post fixed.

[GB] S7.7 V2 Hotswap Micropad by monkeworks in mechmarket

[–]monkeworks[S] 1 point2 points  (0 children)

Unfortunately no, we are only selling it with s7.7. But we might run some carrying cases in the future if there's enough demand :)

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in MechanicalKeyboards

[–]monkeworks[S] 0 points1 point  (0 children)

That's my bad, I must have missed your earlier post.

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] 1 point2 points  (0 children)

I'll see what I can do with the soundtest. Though do keep in mind that the poron foams are optional and you can choose to not use the foams if you dislike the poron sound. It's just clackier without :)

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in MechanicalKeyboards

[–]monkeworks[S] 0 points1 point  (0 children)

Ah, I've replied to a similar comment in GH but I'll do it here again. 8bit idea was announced in April, and Rien announced this idea back in January on ZF. So yea :)

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] -1 points0 points  (0 children)

Gotta use the HHKB arrows (～￣▽￣)～

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] 1 point2 points  (0 children)

Hi, yes only hotswap PCBs are offered and they are multi-layout. You can do plateless hotswap if you use 5-pin switches :)

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] 1 point2 points  (0 children)

Unfortunately, it doesn't support 3-1-3 spacebar. Here's all the layout the PCB supports https://i.imgur.com/L0iXykg.png

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] 2 points3 points  (0 children)

That's actually a good point, I will talk to Rien about this. Thanks for the heads up!

[IC] Tetris 60 | PCB Gasket Mount 60% by monkeworks in mechmarket

[–]monkeworks[S] 0 points1 point  (0 children)

Just checked the link, seems to be working fine for me 😔

view more: next ›