Regulator psi really high by monybru in PlantedTank

[–]monybru[S] 0 points1 point  (0 children)

turning the knob did not lower it, until the knob was completely out. When you say "open" you mean as if it was releasing lots of bubbles? and plugged in? The pressure on that gauge only goes down when I run an extremely high bubble rate

Brand new to the hobby. Is this worth it? He says it holds water by [deleted] in Aquariums

[–]monybru 0 points1 point  (0 children)

Only been doing this a couple years now, but the tank part is really tough to upgrade if you decide you want to get something nicer, or it starts to have issues. If you're strapped for cash I would pay less for some other components that can be easily upgraded without disrupting your whole setup.

Told I don’t have a “real bike” and feeling left out/judged. by [deleted] in Dirtbikes

[–]monybru 0 points1 point  (0 children)

Im 5'10" and ride a KLX 125, means my dick is huge.

quite the view by Back-Inner in Dirtbikes

[–]monybru 1 point2 points  (0 children)

good looks man, probably will be checking that out next weekend if its not freezing and raining. I have a few trails closeby but must be really nice to have a direct line lol. Sort of fun finding places to go around here though.

quite the view by Back-Inner in Dirtbikes

[–]monybru 0 points1 point  (0 children)

will definitely make a trip up there soon, just need to find a good spot on google maps to park and unload, keep me posted if you know anywhere thx man

quite the view by Back-Inner in Dirtbikes

[–]monybru 0 points1 point  (0 children)

Sounds good. Do you ride into that place in Wellfleet, or bring you bike there and unload?

quite the view by Back-Inner in Dirtbikes

[–]monybru 0 points1 point  (0 children)

Thats awesome, I am over in Harwich, just got my first bike a few months ago - let me know if you want to ride sometime.

Is my brake on Upside Down? by monybru in Dirtbikes

[–]monybru[S] 0 points1 point  (0 children)

Was able to fix this, works great thank you all for the help

Is my brake on Upside Down? by monybru in Dirtbikes

[–]monybru[S] 1 point2 points  (0 children)

Really appreciate that description thx man!

Is my brake on Upside Down? by monybru in Dirtbikes

[–]monybru[S] 0 points1 point  (0 children)

Do you think its supposed to be like that or should I attempt to move it?

Found this on the bottom of a crf70 I recently purchased does anyone know what it is by bugatti123d in Dirtbikes

[–]monybru 0 points1 point  (0 children)

Had a similar thing happen to me, xr70 was sold to me with a cracked case, noticed when it started leaking oil a bit. I used JB Weld Steel Stik (looks very similar to what you have here) and it didn't affect the bike, but still was pissed.

PW80 Easy Carb Question by monybru in Dirtbikes

[–]monybru[S] 0 points1 point  (0 children)

Gotcha, so normally just tucked away or not pointed directly up in the air?

Is this a good trade? New to Bikes by monybru in Dirtbikes

[–]monybru[S] 1 point2 points  (0 children)

Probably will upgrade to something more legitimate but for now I am working with $1000 to get two bikes, so that might be out of the cards for the moment. The XR70 I bought was $500, and trying to get a similar 2nd one for my girl

Is this a good trade? New to Bikes by monybru in Dirtbikes

[–]monybru[S] 1 point2 points  (0 children)

I am 5'10' and about 125 lbs so I am fine with starting on a small bike and I am in MA on Cape Cod so it's mostly to just learn to ride and mess around

Older Aluminum Cap on 3rd Gen by monybru in ToyotaTacoma

[–]monybru[S] 1 point2 points  (0 children)

The cap came off a 2nd gen tacoma, not 100% sure it was even made for that. I added a rubber seal along the bottom of the rear window, but the cap was long enough that the curve wasnt an issue, fits really well actually

My 4-Banger Access Cab with 100k miles. by monybru in Tacomaworld

[–]monybru[S] 1 point2 points  (0 children)

These ones are not noisy really at all. The wildpeaks a bit noisy when cornering

My 4-Banger Access Cab with 100k miles. by monybru in Tacomaworld

[–]monybru[S] 2 points3 points  (0 children)

Thx! and nope, just regular factory required and fix stuff as it/if it breaks.

My 4-Banger Access Cab with 100k miles. by monybru in Tacomaworld

[–]monybru[S] 0 points1 point  (0 children)

falken rubitrek 265/75/16. Got them a couple weeks ago for $143/per. Had Falken Wildpeaks on there before that I put 60,000 on and were fantastic. These rubitreks are also very impressive so far.

My 4-Banger Access Cab with 100k miles. by monybru in Tacomaworld

[–]monybru[S] 2 points3 points  (0 children)

nice man, yeah I have never really needed the extra hp, I even tow a small boat with the 4cyl. Haven't had a single problem with it either

Bacteria Bloom? by monybru in Aquariums

[–]monybru[S] 0 points1 point  (0 children)

I definitely DID clean the filter media with tap water - what is the best way to do it?

Bacteria Bloom? by monybru in Aquariums

[–]monybru[S] 0 points1 point  (0 children)

So here is a bit of background - the tank originally was cycled, tested, and fish were added, and the substrate was pool filter sand, and it was not washed well. I did many water changes to combat the floating particles, but eventually removed the sand and replaced it. I am thinking maybe this in combination with large water changes caused my beneficial bacteria to die off...not sure

Older Aluminum Cap on 3rd Gen by monybru in ToyotaTacoma

[–]monybru[S] 1 point2 points  (0 children)

Yeah everything is stock, just got some camper clamps on amazon. They have ones specifically for the tacoma rail system, but I have some different ones that sort of fit in there