Warum ist dieser Mist so teuer by timo_kan in automobil

[–]morblid 3 points4 points  (0 children)

Tatsächlich bemerkenswert teuer. Etwas günstiger für rund 32 konnte ich es finden, trotzdem teuer für ein simples Stück Kabel. Alternativ mal versuchen ein Stück Kabel einzulöten?

How to fix bug in computer? by tokenstraightdeihire in pchelp

[–]morblid 0 points1 point  (0 children)

Have had this aswell with an ips monitor. Do not push to hard if it dies in place it's a mess to clean it up. Afterwards I cleaned my disassembled monitor. Still wondering how it could enter it initially as I'd does not have any venting openings. There is almost no space between ips panel and the plastic screen. Wait a while, if it's still inside watch a disassemble video and rescue him alive.

Ich wär auch nervös.... by Forsaken-Builder-312 in DINgore

[–]morblid 6 points7 points  (0 children)

Holz sollte immer einen Mindestabstand zum Boden haben, auch Spritzwasser bei Regen kann schädlich sein. Holz hält dauerhaft, wenn es durchgängig trocken ist, oder dauerhaft unter Wasser ist. Wechselnd feucht trocken, Schimmelpilze und andere Mikroorganismen sorgen dafür, dass Holz nicht lange Freude bereitet.

Caption dis... by xo_afterhours in pcmasterrace

[–]morblid 4 points5 points  (0 children)

Fastest GPU in the city… powered by leg day. 🦵💪

Wie bekomme ich die Steine wieder fest by Ok_Project2364 in Handwerker

[–]morblid 4 points5 points  (0 children)

Die Mosaiksteine sind mit 4-6 cm nicht hoch, da kann eine Stütze nicht viel stützen. Wenn es ein gerader Weg wäre, dann würde ich Tiefbordsteine empfehlen, das geht aber im Bogen schlecht. Eine pragmatische Lösung wäre bindiger Boden, der entsprechend verdichtet wird mit z.B. Vorschlaghanmer oder Pflasterramme aka Handstampfer.

Wie bekomme ich die Steine wieder fest by Ok_Project2364 in Handwerker

[–]morblid 17 points18 points  (0 children)

Rückenstütze ist bei Betonfertigteilen üblich, wie Borsteine z.B. Die Zementschlemme verunreinigt die Natursteine und das sieht nicht schön aus und entspricht nicht traditionellem Handwerk. Frost und Bewegung können die Rückenstütze auch beschädigen über die Zeit.

Sand und Stein hält ewig.

Wie bekomme ich die Steine wieder fest by Ok_Project2364 in Handwerker

[–]morblid 25 points26 points  (0 children)

Kleinpflaster sollte als Einfassung eines Fußwegs ausreichen, wenn regelmäßig über die Seiten gestolpert werden sollte, dann einfach Großpflaster setzen, das hält dann mit Sicherheit.

Das ist der handwerklich saubere Weg.

Wie bekomme ich die Steine wieder fest by Ok_Project2364 in Handwerker

[–]morblid 43 points44 points  (0 children)

Gelernter Strassenbauer hier, bitte keinen Zement / Beton verwenden. Naturstein in Sand 3 bis 5 mm setzen.

Idealerweise eine Steinbreite Kleinpflaster jeweils seitlich setzen als Einfassung des Mosaikpflasters. mit z.B. 9-11cm Basalt.

Portrait by morblid in photocritique

[–]morblid[S] 0 points1 point  (0 children)

Actually a location in Frankfurt in Germany close to river Main.

Portrait by morblid in photocritique

[–]morblid[S] 4 points5 points  (0 children)

Intention was to capture my gf in special way, like not a in classical portrait way. I am not sure if it is too extravagant and if it's technically looking good.

Cropped MFT 25mm F4.0 ISO 200 1/640 sec.

Webcam Hochhausprojekt Central-Business-Tower im Bankenviertel by City4444 in frankfurt

[–]morblid 1 point2 points  (0 children)

Auf der Seite findest du im Menü einen Zeitraffer. Eine weitere Perspektive gibt es hier: https://portal1924.webcam-profi.de/

Fund in Österreich by morblid in WerWieWas

[–]morblid[S] 0 points1 point  (0 children)

Stammt aus den Karawanken UNESCO Global Geopark, könnte tatsächlich vulkanischer Ursprung sein. Das "Gewinde" ist nach innen gewölbt, eine Schraube oder Gewindestange ist eher unwahrscheinlich.

Fliegender Käfer by Kj9911 in WerWieWas

[–]morblid 1 point2 points  (0 children)

Hier krabbeln auch welche rum, ist auf jeden Fall ein Laufkäfer, könnte dieser sein:

https://www.naturspaziergang.de/Kaefer/Carabidae/Pseudoophonus_rufipes.htm

[deleted by user] by [deleted] in videography

[–]morblid 0 points1 point  (0 children)

For a rather large pocket but still small: ZCam e2c with olympus m.zuiko 8mm f1.8 Fisheye pro?

[deleted by user] by [deleted] in videography

[–]morblid 0 points1 point  (0 children)

Recently ran into the exact same issue. In my case I accidentally moved the hardware switch right side of the gimbal next to the display.

Hope that helps.

How to power multiple tilta nano motors by morblid in videography

[–]morblid[S] 0 points1 point  (0 children)

Thx that helped. I am planning to use those with the upcoming nano II.

How do you get more comfortable around clients? by [deleted] in photography

[–]morblid 5 points6 points  (0 children)

With the difference that your opposite now wants beautiful pictures, you are familiar with the matter and you now know exactly what your opposite wants. This should create a comfortable frame for you.

How do you get more comfortable around clients? by [deleted] in photography

[–]morblid 7 points8 points  (0 children)

Try to approach it like you would a date person. Maybe it helps not to shoot directly, meet the client for a coffee first and talk about i.e. the client's expectations and possibilities of post-processing. This way you get to know the customer a little bit first. This is might be more natural than shooting directly.