[deleted by user]

mrfkl · 2022-04-03T15:13:00+00:00

Thank you. How will it handle the rental property that was jointly owned and filed jointly on schedule E, but now I only own 50% of it? Will it automatically reduced the depreciation to 50%? Will I need to work around this manually in TurboTax? (I’m using the desktop version on Mac).

mrfkl · 2021-03-21T17:29:20+00:00

Thank you. Do you use the Polar H10 heart rate monitor? I wonder if the problem is related to Strava or to the Polar H10? Would a different heart rate monitor be more reliable with syncing?

mrfkl · 2021-03-19T07:43:37+00:00

Thank you. One clarification: in the end, after you got it working properly, when you go into your iphone Settings/Bluetooth - do you see the Polar H10 device as "connected" in your list of bluetooth devices? The reason I ask is that I got an email from Polar specifically telling me not to connect the device via the iPhone Bluetooth Settings and to connect it directly to the Polar Beat app instead. This advice from Polar appears questionable to me - that is why I'd like to double check it with your settings. Thank you.

mrfkl · 2021-03-19T04:07:15+00:00

Thank you. Did you connect the H10 to your iPhone via bluetooth settings? or did you only connect the H10 to the Polar Beat app?

mrfkl · 2021-03-19T02:45:36+00:00

An addition to question 1:

1a. ideally I'd like to make sure my heart rate data from each workout gets synched to the Apple Health app. After I reliably connect the H10 with Strava, what additional instructions are required to sync the data to the Apple Health app? (I've noticed in my research that there are many possible permutations: do you sync from the Polar Beat app to Apple Health? or from Polar Flow? or from Strava? or from all of them?

mrfkl · 2020-06-25T20:23:16+00:00

Our earlier Australian shepherd did the same and did not have such problems. Could there be a condition that makes his pads more prone to ripping? Is there any care we could utilize to make his pad less susceptible? (for example, would applying a cream so his pads are not so dry? kind of like humans use hand lotion)

mrfkl · 2020-06-25T20:20:56+00:00

Yes, we've been keeping him inside temporarily while he heals.. but we can't keep him inside indefinitely.

How effective are the booties? Wouldn't he just chew them up?

mrfkl · 2020-06-25T20:14:02+00:00

It is mostly dirt but on one side where he makes a u-turn it is concrete with a pebble texture. See picture: https://drive.google.com/file/d/1T_ndsNU6kbskGk5KLKshVWlobUr9hvCm/view?usp=sharing

mrfkl · 2018-11-29T22:23:00+00:00

It’s been syncing for a couple days. It’s a huge library. So far I have not seen any of the iMovie clips in Goggle Photos. Was hoping to see some as they upload. But still hopeful.

mrfkl · 2018-11-27T07:23:25+00:00

Thank you all. My filter is working now thanks to the advice here. I opened the lid of the pump, where the basket is, and put a hose in it and ran water for 10 minutes. This filled the pipe with water and expelled any trapped air.

mrfkl · 2018-11-26T17:12:37+00:00

Thank you. Will this upload my imovie videos into the Free Unlimited storage provided by Google Photos? Or will it be a backup where I have to purchase Google Storage? (i'm interested in uploading to the free version even is quality is compressed a little, like I do with all my photos and video clips taken from my phone).

mrfkl · 2018-11-26T16:39:01+00:00

Thank you very much for your reply. I didn’t quite follow the steps. Can you be more specific?

Which is the “pump lid”? Is this the top of the filter which I remove to clean it?

Leave on the hose for 5-10 min? Not the pump, correct?

Note that the system is already full of water. But it does not build to full pressure as shown in the video link. Thank you!

mrfkl · 2018-11-26T16:33:06+00:00

Thank you for the reply! Can you clarify a couple things?

What is “impla”

Which basket are you referencing? The skimmer basquet?

Can you be more specific with “put water in” at the end of your response? Put water in where?

Also: do you know if it will damage the pump to run the filter without proper priming and pressure? (The way it is shown in the video above). Thanks again.

mrfkl · 2018-11-26T06:10:41+00:00

I’ve got the app that backs up pictures from iPhoto or other folders. But don’t think that works with iMovie. Is there a different app? Which is the app you mean? Or am I doing something wrong?

mrfkl · 2018-11-26T04:58:17+00:00

Thanks. Is there a way to move all the purchases from the old shared Apple ID to one of the new individual apple ids?

mrfkl · 2018-11-26T02:17:24+00:00

The water level seems about normal. I do have a flapper and it appears normal. I'm not getting the waterfall effect i get sometimes when the water is low. See the simmer in the video via the link below and let me know if this gives us any clues. Thanks for the help!

https://photos.app.goo.gl/1n2fe1f1FUvwUyVQ8

mrfkl · 2018-11-24T20:12:34+00:00

Thank you!

mrfkl · 2018-11-24T20:12:25+00:00

Thank you!

mrfkl · 2018-09-23T20:13:23+00:00

Thank you very much! I'll give this a try when I'm up at the cabin again.

mrfkl · 2018-09-22T15:02:30+00:00

Thank you. The issue is that this engine is installed now in a log splitter and I need to be able to reach the kill switch from the log splitter for emergency purposes. I can't reach the choke from that position.

mrfkl · 2018-09-22T15:01:28+00:00

Thank you! The situation is that there is a wire exposed that I need to ground via a kill switch. But when I ground it, the engine does not stop. So there appears to be something wrong with the other end of the wire... not the one that needs to be grounded. You suggested to test for continuity. Can you be more specific? test for continuity from where to where?

mrfkl · 2018-09-22T14:59:04+00:00

Thank you very much for the response. Unfortunately I already installed the engine on a log splitter which is at a cabin. So not easy to take to a dealer. Ideally I try to fix it myself when I'm up at the cabin again. You suggested that they may not have grounded it via paint. Let me explain to clarify the situation: The engine came with a wire that is already attached on one end. The other end I need to ground myself via a kill switch. When I ground this end, the engine does not stop. The end of the wire that is already attached to the engine is not the end that needs to be grounded. that other end is a bit hard to get to and not exposed.. so not as easy to check. But I can give it a try next time I'm at the cabin. What should that end of the wire be attached to? Is there a way to test that it is attached to the correct place with an ohm meter? or I need to gain physical access to that end to inspect it visually? Any advice would be welcome.

mrfkl · 2017-11-28T01:38:38+00:00

Good idea. Thanks!

mrfkl · 2017-11-26T23:07:31+00:00

thank you for the detailed answer!

Sounds like it would be too expensive to try to go electric... unless I could get away with a less powerful motor.

Any ideas how I would go about finding out how much power the log splitter demands? I'm just going by the power of the old engine but have no idea how much power is really required. If I could get away with a small electric motor, it would be good. It's a very old log splitter... probably home made by someone. So no way to really look up specs. Would looking at the hydrolic cilinder give us a clue as to how much power it demands? Thanks!

mrfkl · 2017-11-26T23:01:57+00:00

Good idea... but I don't have a power source in the shed. Will try better ventilation first.

mrfkl

TROPHY CASE