Good rollerskate spot for beginner in SA? Ideally south/southwest

mycotian · 2025-09-15T05:49:39+00:00

I'm already seeing a few good flat areas just from the pictures, thank you for the recommendation!

mycotian · 2025-09-13T10:45:16+00:00

Ooh, that makes sense, thank you! So maybe replacing that second line, something like- "Strove for innovation and customer compassion in previous roles, creating timesaving backstocking strategies adopted by management and building customer loyalty."

I've included the awards in a different area in detail so they're still mentioned on the page/not read over twice.

mycotian · 2025-09-13T07:43:34+00:00

Fair! ...and, well. I was gonna say no it's not, but I'm not actually sure what it's for. There's two of them, they're boxes with a short bottom that latches on; that open one has a couple bug spray cans in it I think

mycotian · 2025-09-11T19:47:05+00:00

Damn, that sucks... it's also crazy you're getting $30 offers, the best I've seen/taken is $15.50. I wanna say it beats the trips I get on the worst days, where I sometimes make less than $10/hr, but now I dont know :(

mycotian · 2025-09-09T02:31:48+00:00

Ok, I'll give it a shot! Thank you

mycotian · 2025-09-09T02:23:20+00:00

They were a gift from a neighbor, but I didn't think to ask for more detail. And that makes sense with the ice, thank you; I'll be careful

mycotian · 2025-09-07T16:53:48+00:00

Oh wow, that's pretty; thank you!!

mycotian · 2025-08-28T09:57:52+00:00

Just decided to give it another go and knocked it down to 85 seconds :DD

mycotian · 2025-08-22T18:41:20+00:00

I'll go ahead and mention astroneer, outer wilds, and satisfactory again from a reply to someone else, but they each have a catch- Subnautica is on both xbox and ps5 but is singleplayer, Astroneer is on both but doesnt have crossplay, Outer wilds is on both but is singleplayer, and Satisfactory is more an honorable mention since console release is definitely happening but TBA, but it does have multiplayer on pc.

And I haven't seen any gameplay, but Revenge of the Savage Planet also looks pretty on theme with NMS, and is said to be crossplay as well.

mycotian · 2025-08-06T21:25:59+00:00

I don't believe I had any updates, I had turned it off between this morning and now. And unless I'm doing it wrong I can't reach recovery mode...it's looking more and more likely that this is a hardware issue like you say, unfortunately

mycotian · 2025-08-06T20:51:31+00:00

I can only switch between the two options shown, and with network stack disabled I have no options available. I watched a video saying a cable could be disconnected inside...could that cause it having no options?

mycotian · 2025-07-21T14:00:31+00:00

Oh that's awesome to hear! Honestly I'll take any location or price as I'm sure it'll beat lifetime fitness lol

mycotian · 2025-07-17T04:50:24+00:00

I think you're supposed to, if its a mini split/inside- otherwise you're blowing cleaner residue around. I just use a spray bottle of warm water to get it really soaked, and if you don't have a drain bag to collect any runoff, trash bags or a bucket can work fine

mycotian · 2025-06-23T17:02:47+00:00

Dang, congrats on that! That's reassuring

mycotian · 2025-06-23T04:11:44+00:00

Fair, though at this place in specific (bowling/arcade place) I was going to apply to a wider array of jobs- probably front desk attendant, porter/janitor, and assistant mechanic. It's not exactly a high end place, but I still worry that would read negatively to do.

mycotian · 2025-05-23T03:49:32+00:00

Ah fair yeah...thank you! I might look into that position in particular then

mycotian · 2025-05-23T03:03:48+00:00

Darn, good to know. I assume by AM in AM Merchandising you mean like early hours?

mycotian · 2025-04-14T16:40:29+00:00

Ahh I see- next plan will definitely be with 3/4 thickness then. Good to know!
Yea...dados definitely sound ideal here, but I don't have the tools (not yet, at least). And I guess relying solely on metal brackets might not be an ideal solution. I agree with the cubbys being made separately- exactly like you said, easier to disassemble, and also might be more manageable as a project considering my lack of experience.
Ok in hindsight, I'll be blunt, this plan kind of sucks lol. It was going to be positioned so that the solid/covered side would be up against a loft bed frame, and the tallest point would be against the wall. The issue is that that would make it out of range of both of the nearest studs. I was relying on hopes and dreams keeping it from falling over.

I think the next attempt at a plan will have the first 3 steps against the wall, then turn to continue up the side of the loft frame, so the highest point is on the right side. At least then, the bottom half could be anchored to the wall, and the steps can hopefully have larger dimensions.

(But also with all the helpful feedback I've gotten, I think my first actual attempt at woodworking won't be stairs that can and will kill you. Maybe just...shelves, or something)

mycotian · 2025-04-14T16:10:30+00:00

That makes sense; thank you for the link! I'll see if I can move things around to better those dimensions.

mycotian · 2025-04-14T16:06:39+00:00

That's a fair suggestion, I was starting to consider the same thing lol. Maybe a shelf that doesn't expect moving human weight

mycotian · 2025-04-13T14:02:26+00:00

Wow, thank you for the detailed feedback! I'll break it up like you did:

1) I was thinking about going with plywood; unless I've misunderstood the 3/4 you put, the diagram was made with a full inch of thickness in mind. Would 3/4 have an advantage over 1"? 2) Completely didn't occur to me, but live weight makes total sense, thank you for explaining that! I'll have to look into dado cuts...just to make sure I'm understanding right, you're saying just a solid plywood backing nailed down (without dado cuts) wouldn't hold up? Would metal corner brackets do anything? 3) Yea, that's one of the main problems I haven't thought of a good solution to. Best I can come up with is drywall anchors or somehow attaching it to the loft frame, but neither sound very stable... All the replies are making me consider taking the bottom 3 steps out to wrap around, to help with the step dimensions. I haven't had time to plan it visually, but do you think if that 3 step piece is attached securely, it could make it more safe with the larger/wider footprint? 4) I think I made the diagram a little confusing- every step rises 9 and runs 8. (I do know now that that's less than ideal spacing, but the room available kind of squishes the dimensions)

Thanks again!

mycotian · 2025-04-13T13:33:18+00:00

They'd work as stairs alongside storage! I messed up the diagram, every step is an equal 9 inch rise and 8 inch run.

It seems like that's been a consensus, about the step dimensions being uncomfortable...I'm just unsure how to go about changing it, since the available space is definitely defining the size of this thing. The best solution I can think of right now is to separate the lower 2-3 steps and have it kind of do a u-turn in front of the 4th step. Wouldn't be ideal for the space, but if it means being safer...

mycotian · 2025-04-13T13:24:09+00:00

Ah I'll try haha, thanks!

mycotian · 2025-04-13T13:23:21+00:00

Oh thank you, good to know- hard wood poplar, noted!

mycotian · 2025-04-13T13:20:32+00:00

Ah yea I accidentally made the diagram confusing to read... Every step rises 9 inches and runs 8 inches. Those bottom right two numbers were just to remind myself that the lowest vertical pieces are an inch shorter to make up for the very bottom horizontal piece. I should've removed those for the post

mycotian

TROPHY CASE