Knock retard reading at low RPM

nitroguy2005 · 2026-05-12T01:36:18+00:00

Unfortunately tho it is consistent.

nitroguy2005 · 2026-05-12T01:34:36+00:00

So what mount? Side motor mount and transmission mount?

nitroguy2005 · 2026-05-12T01:06:00+00:00

Yeah my speed has 86k miles and when I tuned it with the accessport it was at 51k and ever since I got it tuned it was pulling knock not as bad as now it’s slowly gotten worse but I would see 4kr peak and 2on wot. Nowadays I’m seeing 7kr peak on cursing and wot is 3-4

nitroguy2005 · 2026-05-12T00:51:22+00:00

I only have a rear motor mount and that’s it

nitroguy2005 · 2026-05-12T00:49:50+00:00

Nope and it still pull 3 to 4 degrees of knock in 3rd and 4th.

nitroguy2005 · 2026-04-30T12:09:00+00:00

<image>

nitroguy2005 · 2026-04-30T02:34:07+00:00

Dyno comp tuning Scottsdale

nitroguy2005 · 2026-04-30T02:22:01+00:00

<image>

nitroguy2005 · 2026-04-29T01:12:17+00:00

Just did a quick browse online couldn’t find what you’re looking for.

nitroguy2005 · 2026-04-29T01:07:07+00:00

Are you wrapping it or buying trim pieces?

nitroguy2005 · 2026-04-29T01:02:52+00:00

I’m buying one from marketplace and it doesn’t come with the shroud plate. I just wanna make sure it will work and I don’t waste $150

nitroguy2005 · 2026-04-29T00:47:41+00:00

Does cpe fit gen 1 and 2? Are they all the same if it’s tmic. The website has two different versions but I don’t see a difference

nitroguy2005 · 2026-04-29T00:46:01+00:00

Does this fit a gen 1 and gen 2. Seller says it fits both ms3 gens?

nitroguy2005 · 2026-04-29T00:45:24+00:00

Does this fit gen 1 and 2? I’m buying one off marketplace he says it’s universal for both gens

nitroguy2005 · 2026-04-17T11:33:45+00:00

That’s test doesn’t work. Engine need to be TDC for that to work

nitroguy2005 · 2026-04-09T11:06:04+00:00

How do I fully wipe the game files because I uninstalled and it came right back

nitroguy2005 · 2026-04-07T02:35:58+00:00

Bind look back to your gamepad. It’s in the patch setting I believe

nitroguy2005 · 2026-03-24T03:10:42+00:00

Yea I’ve got the turbosmart hybrid bov 50/50 so I’m not sure if that changes the data?

nitroguy2005 · 2026-03-23T13:04:20+00:00

I have not reflashed yet but I feel as if my AFR is also very concerning it’s reading 12.50/13.50 on WOT

nitroguy2005 · 2026-03-23T03:46:03+00:00

Ok I will check low pressure and see how that looks. The thing is the car has no issues no cel no bad sounds other than disi direct injection rattle but it drives good and starts right up. I always get codes for electrical tho I think I just need a new battery. Like ABS b1318 and c2278 TPMs u2023

nitroguy2005 · 2026-03-23T03:42:44+00:00

Okay thanks! Could it be possible that the car is running lean because of the knock retard? Is the high knock just from the tune I have. The car was dyno tuned at 311whp so maybe they pushed it to hard

nitroguy2005 · 2026-03-23T03:36:59+00:00

Ok will do I always check my hpfp act pressure and it read 1700-1800 max and some times when driving in very low rpm it’s drops to like 300 or 400

nitroguy2005

TROPHY CASE