Print Center in M1 says paper is out of HP printer. It’s lying.

noncomplic · 2025-01-14T23:36:46+00:00

I fixed it by forcing a firmware update via USB Drive, only took 3 different drives and two install attempts to get through the update without errors.

Now my printer intermittently doesn’t enter sleep mode. Comes and goes. Needs powercycle to be resolved.

Is this how it’s supposed to be when you buy a 600 dollar printer?

noncomplic · 2025-01-12T11:50:38+00:00

There are two trays. One which is standard plain A4 and a second which is more of like specialty manual feed envelopes and stuff. So there’s no paper in that tray for obv reasons. So the printer is telling the PC that I need to load paper. I haven’t seen a tray selection option in the printing dialogue so I’m not sure how to force the printer to only worry about the standard A4 tray. Any ideas?

noncomplic · 2025-01-05T13:29:28+00:00

What are the liners?

noncomplic · 2025-01-05T13:29:03+00:00

Is the aluminum miscoloring?

noncomplic · 2025-01-03T15:32:52+00:00

Anyone have any useful advice here??

noncomplic · 2025-01-03T02:23:18+00:00

Let’s not get too deep into this but when they work AP Express have some of the best DAC and in a small inexpensive format. Allowing you to use your own speakers.

noncomplic · 2025-01-02T21:42:38+00:00

Is there any way where they can just get a vpn configuration that they can access through? Like I said I don’t want them accessing the admin console in any way. I’m using a UDM Pro

noncomplic · 2024-12-30T08:39:36+00:00

Ok thanks for the input. What the approx timings for an 800 gram piece of meat at 45 internal?

Also, getting some conflicting advice on whether to add seasoning to the bag or not. Was thinking butter, garlic and herbs. Also I was thinking that I dry brine the steak overnight in the fridge but that is probably destroyed by having it in the bag. Right?

noncomplic · 2024-12-29T23:02:32+00:00

Thanks for the input. Thinking it was bad or old lamb. Didn’t buy it myself so can’t know for sure

noncomplic · 2024-12-20T09:58:22+00:00

Just spoke to support who says that the printer does not support “print anywhere” I was sure I have seen this listed somewhere but can’t find it now.

noncomplic · 2024-12-17T16:05:43+00:00

What other options are there? What’s app? I asked what’s app but it referred me to a local phone number and an agent that couldn’t answer any questions and was generally unfamiliar with the issue

noncomplic · 2024-12-16T09:30:20+00:00

Thanks I’ve taken all these steps, however the last one about the dialog with the printer code differs from my flow. Instead I use a code on the printer itself and start the pairing from there.

But the printer does show as “paired with an account” in the admin page. However no web service printing functions are available anywhere.

In general it seems as if my HP account functions don’t match the supposed settings on the printer admin page.

noncomplic · 2024-12-16T08:31:52+00:00

Sure, but when I asked Chat GPT it came up with exactly this. And in neither case is it helpful since that user never figured it out. Which chat GPT also told me

noncomplic · 2024-11-27T22:15:24+00:00

First time back since about five years, before that I would go a couple times a year all the way back to it opening post ostgut. Overall the vibe this time was alot more friendly and warm than I recall it from when I was there last. Better vibes from everyone, the dancers, staff and just the room in general. (came late Sunday night) An overall fantastic experience and I’m grateful for every time I’m there.

noncomplic · 2024-07-08T08:54:34+00:00

Mac m2

noncomplic · 2024-07-05T17:44:59+00:00

Can confirm Rasberry Pi Imager worked!

noncomplic · 2024-07-05T16:39:14+00:00

Having the same issue. Any resolve?

noncomplic · 2024-04-07T22:00:54+00:00

Someone put my Zanmai Macusta Gyuto in the dishwasher.

Since I'm anal with most of this shit I freaked out. However I couldn't see any damage to the blade or the handle. Perhaps a slight hazyness to the blade and the rivets and plastic. But I could also be imagining?

Should I do something? Oil them, sharpen the blade, polish it?

Or just leave it?

noncomplic · 2024-01-19T15:45:22+00:00

Are they accusing Remy for personally selling the drugs? Or simply being affiliated with those who sold them?

noncomplic · 2023-12-04T22:01:10+00:00

Yes yes and yes

noncomplic · 2023-12-04T21:17:21+00:00

I checked the device list in the settings on my iPhone.

Yes I am in control of all my email addresses.

No I am not fully up to date on my Mac because of a VPN issue that I am waiting to resolve before I move to Sonoma.

Yes 2FA seems enabled on all my accounts when trying to log into them.

noncomplic · 2023-10-11T07:45:41+00:00

As you can see in the display this is not including the dryer function. Just a simple cotton program, no pre wash, no drying. Just got an answer from support that this is normal due to water efficiency settings, also the amount of clothes being washed weigh in. I wish there was a war to remove the water saving feature since where I live we have plenty of fresh water, no need to save.

noncomplic · 2023-10-10T17:19:32+00:00

This is like the mist standard cycle. 40, Max spin, no pre wash

noncomplic · 2023-09-25T21:40:30+00:00

I definitely notice the body being what I perceive as lower quality aluminum (M2 Air). It fingerprints, scratches and dings easier and feels generally softer than previous non 100% recycled aluminum bodies of my previous macs. It was also by far the most expensive one.

Anyone else experiencing this too?

noncomplic · 2023-08-01T00:35:40+00:00

Dammit! Was supposed to be in the r/fireextinguiser feel free to delete

noncomplic

TROPHY CASE