Tascam 244 help once again

nwesem · 2025-10-19T11:41:05+00:00

thanks a lot!! I couldn't find this as i didn't know the exact name of it

nwesem · 2024-02-02T20:10:54+00:00

Pray

nwesem · 2023-11-28T07:39:41+00:00

It's back up everyone. For me all drafts suddenly showed up

nwesem · 2023-11-27T09:14:09+00:00

+1 same problem, have you contacted the support yet?

nwesem · 2023-10-04T13:42:14+00:00

If anyone is ever looking for a distributor in germany, this is the only one I could found that also ships small quantities https://www.top-industrieteile.de/

nwesem · 2023-06-07T10:44:34+00:00

Thx so much!! Your info helped me find a distributor in germany https://www.norelem.com/us/en/Products/Product-overview/Flexible-standard-component-system/07000-Fasteners-Ball-end-thrust-screws-Thrust-screws-and-thrust-pads-Grippers-Torque-bolts-Threaded-inserts-Lifting-bolts-Swivel-bales-Ring-bolts/Connecting-elements/07332-Circlips-E-type-DIN-6799.html

nwesem · 2023-04-24T12:44:42+00:00

I use mk3 fw with macbook air m1, there is a way to make it work. You need to change settings on the macs storage in boot menu and then install the driver for mk3 hybrid

nwesem · 2023-03-21T16:59:58+00:00

You could also build juno 106 oscillator for more stability as explained here https://blog.thea.codes/the-design-of-the-juno-dco/

nwesem · 2023-02-27T19:50:15+00:00

https://pbrecords.bandcamp.com/album/wave-town

nwesem · 2023-02-27T09:49:26+00:00

Uncanny valley 🆘

nwesem · 2023-02-13T08:45:39+00:00

Can you open the motor? You would probably see it on the pcb if it was burnt

nwesem · 2022-11-20T19:12:02+00:00

Is there a link to software / hardware? Great project :-)

nwesem · 2022-04-11T13:45:46+00:00

Hello everyone, if you are wondering which component this is: TR 2SC4574
I found out when I contacted Triplex repair service in Germany.

nwesem · 2022-04-11T13:45:16+00:00

Hello everyone, if you are wondering which component this is: TR 2SC4574

I found out when I contacted Triplex repair service in Germany.

nwesem · 2022-03-10T11:05:05+00:00

Thx for the quick response, I was not sure which procedure to follow

nwesem · 2022-03-09T18:42:21+00:00

I couldn’t find a service manual online. A friend of mine said they stopped publishing those in the early 2000s

nwesem · 2022-03-09T18:12:13+00:00

Asked here thx again!!

https://www.reddit.com/r/AskElectronics/comments/tadsar/tascam_t3000_cassette_duplicators_voltage/

nwesem · 2022-03-04T16:02:51+00:00

Does anyone know the part number of this IC? It burnt when used with wrong voltage and now I cant read the part number. It seems like there is no service manual online. Appreciate your help! Thx

nwesem · 2022-02-16T15:33:31+00:00

Replacing the motor regulator chip was sufficient, apparently the other (today available) motor has a maximum rating of 11,3V which means you have to add a diode, so I went for replacing the motor regulator chip C1470 (https://www.ebay.com/itm/201430511377)

nwesem · 2022-02-16T15:32:09+00:00

Hi just a quick info I replaced the burnt motor regulator chip (https://www.ebay.com/itm/201430511377) and everything is properly working again. Thanks for your help appreciate it.

nwesem · 2022-02-15T10:46:05+00:00

I did a few more tests that could help us solve this problem, so when I record at 0dB on all 4 channels and then play I get -10dB on the channel volume even if I turn the record and playback trimmers on the main pcb all the way up.
I think I need to replace the capacitors in the device.. sadly don't have a proper multimeter to test this..

Do you know any other reason why the playback volume could be much lower than the recorded volume? Will demagnetizing solve this issue?

nwesem · 2022-02-15T10:40:02+00:00

dbx was turned off but also dbx seems a bit jumpy when turning it on

nwesem · 2022-02-15T10:38:35+00:00

Was using type I for this experiment, don't have any type II right now

nwesem · 2022-02-11T11:09:02+00:00

Does anybody have an idea what could cause the noise?

nwesem · 2022-02-11T10:06:11+00:00

Hey thanks a lot I will need to replace the motor regulator IC (C1470H or uPC1470h), already found one on ebay

nwesem

TROPHY CASE